دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
Study on World Production of Wood,
Paper and Their Products from 1998 to 2007
بررسی تولید جهانی چوب و کاغذ و فرآوردههای آنها از 77-1386
1
24
116
FA
Journal Article
2012
07
01
Important producer countries of wood and paper products are identified by this study. Identification of these countries is Important for trade of wood and paper products. Ranking of different regions of the world was done using mean values of the production based on FAO 10 years reports from 1998 to 2007. Results showed that the production value for the major part of the products was almost constant during the studied period. Developed countries such as:USA,Canada,ChinaandGermanywere the foremost producers of wood and paper products and even the production rate ofUSAandCanadais slightly lower than the total production of all other countries of the world. These countries have kept their production rate as the years before 1998. The global harvesting of non-coniferous round woods was higher than coniferous round woods, but world production of the non-coniferous industrial round woods became less than that of coniferous industrial round woods in the last years of the studied period. Some Asian countries such asIndonesiaandMalaysiahave been willing to produce secondary products instead of raw materials. These countries are among the 10 top countries in manufacturing of the products such as wood-based panels and pulp and paper in the studied time period.
کشورهای برتر تولیدکننده فرآوردههای چوب و کاغذ جهان با این بررسی مشخص میشوند. شناسایی این کشورها اهمیت زیادی در تجارت این فرآوردهها دارد. رتبهبندی مناطق مختلف جهان <br />با محاسبه درصد و میانگین میزان تولید انواع فرآوردههای آنها و همچنین براساس آمار دهساله <br />(77-1386) انتشاریافته سازمان فائو انجام شد. نتایج نشان داد که درصد تولید بیشتر محصولات در طی دوره مطالعه ثابت بوده است. کشورهای توسعهیافته جهان مانند آمریکا، کانادا، چین و آلمان در تولید بیشتر محصولات رتبه بالایی دارند و حتی میزان تولید اغلب فرآوردههای کشورهای آمریکا و کانادا به تنهایی با قارههای دیگر جهان اختلاف جزئی دارند. این کشورها روند تولید خود را همانند سالهای قبل از 1377 حفظ کردهاند. افزایش برداشت جهانی چوب گرد پهنبرگان زیادتر از چوب گرد سوزنیبرگان میباشد ولی تولید جهانی چوب گرد صنعتی پهنبرگ در سالهای آخر دوره مطالعه کمتر و چوب گرد صنعتی سوزنیبرگ بیشتر شده است. برخی کشورهای آسیایی مانند اندونزی و مالزی تمایل به تولید ثانویه بهجای مواد خام داشتهاند، و این کشورها در تولید محصولاتی مانند اوراق فشرده چوب، خمیر و کاغذ در دوره مطالعه جزو ده کشور برتر جهان میباشند.
https://jwfst.gau.ac.ir/article_116_fea18335e1a81144a718a12c8b560138.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
The Effect of Resin Gradient and Press Time on
The Physical and Mechanical Properties of Particleboard
Produced from Citrus Tree Wood
تأثیر گرادیان مصرف چسب و زمان پرس بر ویژگیهای فیزیکی و مکانیکی تختهخردهچوب ساخته شده از چوب درختان مرکبات
25
40
117
FA
Journal Article
2012
07
01
The purpose of this reseach was to examine the influence of resin consumption gradient and press time on the physical and mechanical properties of particleboard produced from citrus tree residues. Four resin consumption gradients; 0, 2, 4 and 6% difference between surface and core layers (10-10%, 11-9%, 12-8% and 13-7%) and two press times of 4 and 5 minutes were applied and totally 24 laboratory boards were produced. The mechanical and physical properties of boards were measured and the results were analyzed using ANOVA method. The results showed that applying the resin consumption gradient of 2%, the MOR of the boards was improved. However, MOE of the boards increased as the resin consumption gradient increased and the maximum was observed at 6% resin gradient. The results indicated that at resin consumption gradient of 2%, higher IB was reached which was significantly different compared to other resin gradients, but at higher resin consumption gradients lower IB was measured. The thickness swelling of the boards showed irreversible behavior to IB of the boards and as the resim consumption raised to 2%, lower thickness swelling was observed which was significantly different with other resin consumption gradients and further improvement was not observed at higher resin gradients.
این پژوهش با هدف بررسی تأثیر گرادیان مصرف چسب بر خواص فیزیکی و مکانیکی تختهخردهچوب و همچنین کاربرد پسماندهای لیگنوسلولزی بهدست آمده از هرس باغات مرکبات در تولید این محصول انجام شده است. با استفاده از 4 گرادیان مصرف چسب صفر، 2، 4 و 6 درصد بین لایه سطحی و میانی (10-10، 11-9، 12-8 و 13-7) و استفاده از 2 زمان پرس 4 و 5 دقیقه، <br />24 تختهخردهچوب آزمایشگاهی ساخته شد. ویژگیهای فیزیکی و مکانیکی تختهها اندازهگیری و نتایج بهدست آمده در قالب طرح کامل تصادفی و با استفاده از آزمون فاکتوریل مورد تجزیه و تحلیل قرار گرفت. نتایج نشان داد که تختههای ساخته شده با مصرف چسب 11 درصد در لایه سطحی و 9 درصد در لایه میانی (گرادیان مصرف چسب 2 درصد)، دارای بیشترین مقاومت خمشی بودهاند. همچنین با افزایش گرادیان مصرف چسب، مدول الاستیسیته تختههای ساخته شده بهبود یافته و در گرادیان مصرف چسب 6 درصد، این ویژگی به حداکثر رسیده است. بهعلاوه، با افزایش گرادیان مصرف چسب از صفر به 2 درصد بهطور معنیداری به چسبندگی داخلی تختهها افزوده شده است. با اینحال با افزایش بیشتر گرادیان مصرف چسب، مقدار چسبندگی داخلی تختهها کاهش یافته و به حداقل میرسد. واکشیدگی ضخامت تختهها نیز با افزایش گرادیان مصرف چسب از صفر به 2 درصد در حد معنیداری بهبود یافته که با تغییرات چسبندگی داخلی تختهها در این شرایط هماهنگی دارد.
https://jwfst.gau.ac.ir/article_117_c568527b46086d93c59be1130e10e025.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
The Effect of Nano-Silver (Ag) Treatment on The Drying
Rate and Final Moisture Gradient of Poplar Wood
تأثیر تیمار نانوذرات نقره بر سرعت خشک شدن و گرادیان نهایی رطوبت چوب صنوبر
41
56
118
FA
Journal Article
2012
07
01
In this study, the effect of nano-silver (Ag) treatment on the drying rate and final moisture gradient of poplar wood was investigated. Poplar (<em>Populous nigra</em>) boards with green dimensions of 100×70×50 and 20 mm were treated with nano-silver <br />(Ag) suspension by spraying and immersion method. Two concentrations of <br />nano-silver suspension, including 20 and 100 ppm were used. Then, the boards <br />were conventionally dried at a constant dry-bulb temperature of 60 <sup>o</sup>C and relative humidity of 40%. The boards were coated on their four surfaces using epoxy resin to confine the moisture transfer along the board thickness. In addition, the temperature gradient along the board thickness was measured during drying. Results showed that in contrast to control samples, in the nanoparticles-treated boards, particularly those immersed in 100 ppm nano-silver, a reverse temperature gradient developed. The moisture gradient in the 50 mm-thick boards treated by 100 ppm nano-silver was more homogenous than that in control boards; however, no difference was found between the other treated boards and control boards. Despite reverse temperature gradient through the thickness of treated boards, there was no significant difference in drying rate between the control and treated boards. Thus, it can be claimed that in the medium temperature wood drying process, the temperature gradient cannot be considered as a driving force for moisture transfer and therefore the bulk flow due to temperature gradient (Soret effect) can be neglected.
در این مطالعه، تأثیر تیمار نانوذرات نقره بر سرعت خشک شدن و گرادیان نهایی رطوبت چوب صنوبر بررسی شد. برای این منظور، تختههای صنوبر (<em>P. nigra</em>) به ابعاد مقطع 100×70 سانتیمتر و ضخامتهای اسمی 25 و 50 میلیمتر، به دو روش اسپری و غوطهوری و با دو غلظت سوسپانسیون نانونقره (20 و 100 پیپیام) تیمار شدند. سپس، تختهها در یک کوره آزمایشگاهی و به روش جابهجایی هوای گرم در دمای خشک 60 درجه سانتیگراد و رطوبت نسبی 40 درصد، خشک شده و برای محدود کردن شار رطوبت در ضخامت تختهها، 4 سطح از تختهها با رزین اپوکسی پوشانده شد. همچنین، الگوی توسعه گرادیان دما در ضخامت تختهها طی خشک شدن بررسی گردید. نتایج نشان داد که برخلاف تختههای شاهد، در تختههای تیمار شده با نانوذرات بهویژه تختههای غوطهور شده در نانونقره 100 پیپیام، گرادیان معکوس دما توسعه پیدا میکند. تختههای 50 میلیمتری تیمار شده با نانوذرات نقره 100 پیپیام در مقایسه با تختههای شاهد از گرادیان رطوبت همگنتری برخوردار بودند؛ ولی تفاوتی بین سایر تیمارها با تختههای کنترل مشاهده نشد. بهرغم توسعه گرادیان معکوس دما در ضخامت تختههای تیمار شده، تفاوت معنیداری در نرخ خشک شدن بین تختههای شاهد و تیمار شده مشاهده نشد. بنابراین، میتوان گفت که در فرآیند چوبخشککنی در دمای متوسط، گرادیان دما را نمیتوان بهعنوان نیروی رانش مهم در حرکت رطوبت در نظر گرفت و جریان تودهای آب آزاد ناشی از گرادیان دما (اثر سورت) قابل چشمپوشی است
https://jwfst.gau.ac.ir/article_118_b5edbcd12509bf4fe14f3ed851edd935.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
Investigation on Properties of Soda and Soda/AQ
Pulps from Corn Stalk
بررسی ویژگیهای خمیرکاغذهای سودا و سودا- آنتراکینون از ساقه ذرت دانهای
57
72
119
FA
Journal Article
2012
07
01
Soda and soda-AQ pulping of corn stalk applying different charges of active alkali and pulping time was studied. The average value of fiber length, diameter and cell wall thickness were measured as 1.03 mm, 23.64 µm and 5.26 µm, respectively. The content of alcohol-acetone extractives, cellulose, lignin, extractives soluble in 1% NaOH and ash content of corn stalk were determined as 15%, 51.2%, 23%, 45.95% and 2%, respectively. Pulping with four levels of sodium hydroxide (12, 14, 16 and 18%, based on NaOH), and two cooking times (15 and 30 minutes) and constant cooking temperature at 145 ºC was performed. 0.1% AQ was added to soda/AQ cooking liquor. After analyzing the pulping yield and kappa number, two pulps were selected (NaOH; 12, 18%, cooking time; 15 minutes and cooking temperature; 145 ºC) as brown and bleachable stock, respectively. Eventhougth addition of 0.1% AQ showed no significant effect on pulping yield, but its effect on paper strength properties was significant. The result of handsheet evaluation revealed that the strength of pulp produced applying 18% NaOH, 0.1% AQ, and 15 minutes pulping time with breaking length of 8.21 km, and 80.59 N.m/g tensile index was superior to other pulping conditions. The tear index of the pulp produced applying 12% NaOH , 0.1% AQ and 15 minutes pulping time was determined as 10.60 mNm<sup>2</sup>/g. The burst index of pulp produced
در این پژوهش خمیرکاغذسازی سودا و سودا- آنتراکینون از ساقه ذرت با اعمال مقادیر مختلف قلیائی و زمان پخت، مورد مطالعه قرار گرفت. متوسط طول، قطر و ضخامت دیواره سلولی الیاف ساقه ذرت بهترتیب 03/1 میلیمتر، 64/23 میکرومتر و 26/5 میکرومتر اندازهگیری شد و مقادیر مواد استخراجی الکل- استن حل، سلولز، لیگنین، مواد قابلحل در هیدروکسید سدیم 1 درصد و خاکستر بهترتیب 15، 2/51، 23، 95/45 و 2 درصد تعیین گردید. خمیرکاغذسازی سودا با استفاده از هیدروکسید سدیم در 4 مقدار (12، 14، 16 و 18 درصد)، زمان پخت در 2 سطح (15 و 30 دقیقه)، در دمای 145 درجه سانتیگراد (ثابت) انجام گرفت. در فرایند سودا- آنتراکینون، مقدار مصرف آنتراکینون در تمام موارد 1/0 درصد در نظر گرفته شد. پس از تجزیه و تحلیل نتایج خمیرکاغذهای تهیه شده، دو خمیرکاغذ با قلیائی 12 و 18 درصد، زمان پخت 15 دقیقه و دمای 145 درجه سانتیگراد بهترتیب بهعنوان خمیرکاغذ غیرقابل رنگبری و قابل رنگبری انتخاب شدند. افزودن این مقدار آنتراکینون اثر معنیداری بر ویژگیهای خمیرکاغذ نداشت اما اثر آن بر ویژگیهای مقاومتی کاغذ از نظر آماری معنیدار بود. نتایج بررسی کاغذهای دستساز نشان داد که خمیرکاغذ تولید شده با 18 درصد قلیائی، 1/0 درصد آنتراکینون، 15 دقیقه زمان پخت با طول پارهشدن (میانگین) 21/8 کیلومتر و شاخص مقاومت به کشش (میانگین) 59/80 نیوتن در متر بر گرم نسبت به دیگر شرایط خمیرکاغذسازی از مقاومتهای بهتری برخوردار بود. شاخص مقاومت به پاره شدن خمیرکاغذ تولید شده با 12 درصد قلیائی، 1/0 درصد آنتراکینون و زمان پخت 15 دقیقه، 6/10 میلینیوتن در مترمربع بر گرم اندازهگیری شده است. میانگین شاخص مقاومت به ترکیدن خمیرکاغذ تولید شده با 18 درصد قلیائی، زمان پخت 15 دقیقه و بدون مصرف آنتراکینون (معادل 47/5 کیلوپاسکال در مترمربع بر گرم) از مقاومتهای بهتری برخوردار بودند.
https://jwfst.gau.ac.ir/article_119_108a74b2bcc240c2c68d013b45b36ef8.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
Study of Enzymatic Prebleaching Effect on Optical Properties of Bagasse Kraft Pulp in ECF Bleaching
بررسی تأثیر پیشرنگبری آنزیمی در خواص نوری
خمیر کرافت باگاس در رنگبری ECF
73
87
120
FA
Journal Article
2012
07
01
The effect of commercial xylanase enzyme in prebleaching of bagasse kraft pulp was investigated. Xylanase enzyme from <em>Trichoderma viride </em>was added to pulp at various doses of 5, 10, 25 and 50 IU/g pulp for reaction time 2h and then the enzyme treated pulp was bleached in D1ED2 sequences (using Dioxide chlorine 4, 6, 8, 10% + Alkaline extraction + Dioxide chlorine 2% as active chlorine). The results showed that enzymatic treatment improved brightness and opacity and decreased yellowness, kappa number and revolution of refiner for given freeness of bleached pulp significantly (P<0.01). Maximum of brightness and opacity and minimum of kappa number were related to 25IU/g pulp treatment, which had about 13.1%, 1.46% and 2.23 unit significant difference in comparison with those of the control sample, respectively. Minimum of yellowness was related to 50IU/g pulp treatment which had about 7.32% significant difference as compared with control sample. Regard to the obtained results, the 25IU/g pulp treatment could be suggested as optimum treatment.
در این پژوهش تأثیر استفاده از آنزیم زایلاناز تجاری در پیشرنگبری خمیر کرافت باگاس بررسی گردید. آنزیم زایلاناز بهدست آمده از قارچ<em> </em><em>Trichoderma viride </em>در مقادیر 5، 10، 25 و 50 واحد و سطح زمانی 2 ساعت بر خمیر کاغذ تأثیر داده شد و سپس رنگبری خمیر با توالی 2ED1D (دیاکسید کلر 4، 6، 8 و 10 درصد + استخراج قلیایی + دیاکسید کلر 2 درصد بر حسب کلر فعال) انجام گردید. نتایج نشان داد که تیمار آنزیمی موجب افزایش معنیدار (01/0P<) درجه روشنی، ماتی و کاهش معنیدار (01/0P<) درجه زردی، عدد کاپا و میزان دور پالایش برای رسیدن به درجه روانی مشخص خمیرهای رنگبری شده شد. بیشترین درجه روشنی و ماتی و کمترین عدد کاپا مربوط به تیمار آنزیمی U25 میباشد، که بهترتیب اختلاف معنیداری در حدود 1/13، 46/1 درصد و 23/2 واحد در مقایسه با تیمار شاهد دارد. کمترین درجه زردی خمیرهای رنگبری شده مربوط به تیمار آنزیمی U50 میباشد که اختلاف معنیداری در حدود 32/7 درصد در مقایسه با تیمار شاهد دارد. با توجه به نتایج بهدست آمده، تیمار آنزیمی U25 بهعنوان تیمار بهینه آنزیمی پیشنهاد میشود
https://jwfst.gau.ac.ir/article_120_e924748603a434e3682a1e80f546f4df.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
Effect of Organic Complex of Polyhydroxyl Acrylic Acid and Sodium Salt on Optical and Physical Properties of ONP Deinked Pulp
تأثیر کمپلکس آلی پلیهیدروکسیل آکریلیک اسید و نمک سدیم
بر ویژگیهای نوری و فیزیکی خمیرهای کاغذ روزنامه بازیافتی
89
102
121
FA
Journal Article
2012
07
01
Due to the problems of deposition of sodium silicate on the equipment and decrease of the service age of implements, deinking of old newspaper was accomplished using organic complex of Sulvy-x in place of sodium silicate. <br />Sulvy-x was used at four levels of 0.3, 0.5, 0.7 and 1% on the basis of oven dry waste paper and chemical deinking was done. The effect of various charges of Sulvy-x was investigated and on optical and physical properties of deinked pulp compared with those of control sample (ONP recycled using 2% sodium silicate) and its optimum usage was determined. The results of optical properties showed that the brightness of paper increased to 50.8 %ISO and the yellowness decreased to 11.96 %ISO by increasing of Sulvy-x charge up to 0.9%. Also, lower charge of Sulvy-x (0.3%) resulted the highest opacity of 98.63 %ISO. The results of physical properties indicated that the caliper of paper reduced to a minimum value of 109.8 µm. Higher charges of Sulvy-x in deinking process resulted the paper with the higher density. The highest density of 0.546 g/cm<sup>3</sup> was observed using 0.9% Sulvy-x. Also, deinking of old newspaper with 0.3% and 0.7% Sulvy-x resulted the pulps with the highest freeness as 435 ml, CSF. In general, using different amount of Sulvy-x in place of sodium silicate resulted the papers with similar brightness, higher opacity and lower caliper compared to those of control sample. However, the paper with higher brightness and density, lower yellowness and desirable opacity could be produced using 0.9% Sulvy-x in chemical deinking of old newspaper.
در این پژوهش بهدلیل مشکلات موجود در رابطه با رسوب سیلیکات سدیم و کاهش عمر مفید دستگاهها و تجهیزات، مرکبزدایی شیمیایی کاغذهای روزنامه باطله با استفاده از کمپلکس آلی پلیهیدروکسیل آکریلیک اسید و نمک سدیم (با نام تجاری Sulvy-x) بهجای سیلیکات سدیم در فرمولبندی مواد شیمیایی مورد بررسی قرار گرفت. Sulvy-x در 4 سطح 3/0، 5/0، 7/0 و 9/0 درصد براساس وزن خشک کاغذ باطله بهکار گرفته شده و مرکبزدایی شیمیایی انجام شد. تأثیر درصدهای مختلف Sulvy-x بر ویژگیهای نوری و فیزیکی خمیرکاغذ مرکبزدایی شده در مقایسه با خمیرکاغذ شاهد (خمیرکاغذ روزنامه بازیابی شده با 2 درصد سیلیکات سدیم) بررسی شده و میزان مصرف بهینه این ماده تعیین گردید. نتایج بهدست آمده از مقایسه ویژگیهای نوری کاغذهای ساخته شده نشان داد که با افزایش مصرف Sulvy-x تا 9/0 درصد، درجه روشنی کاغذ تا 9/50 درصد ایزو افزایش یافته و درجه زردی تا 9/11 درصد ایزو کاهش مییابد. همچنین درصدهای کمتر Sulvy-x مصرفی (3/0 درصد) بیشترین درجه ماتی (6/98 درصد) را نتیجه داده است. نتایج بهدست آمده از مقایسه ویژگیهای فیزیکی کاغذها نشان داد که با افزایش درصد مصرف Sulvy-xتا 9/0 درصد، ضخامت کاغذ به حداقل مقدار 8/109 میکرومتر کاهش یافته و مقادیر بیشتر Sulvy-x در مرکبزدایی، کاغذهای با دانسیته بیشتر را نتیجه داده است. بیشترین دانسیته 546/0 گرم بر سانتیمترمکعب با استفاده از 9/0 درصد Sulvy-x مشاهده شد. همچنین مرکبزدایی کاغذ روزنامه باطله با استفاده از 3/0 و 7/0 درصد Sulvy-x بهطور مشابه خمیرهای کاغذ با بیشترین درجه روانیCSF ، 9/447 میلیلیتر را نتیجه داد. بهطورکلی استفاده از مقادیر مختلف Sulvy-x در مقایسه با خمیرکاغذ شاهد کاغذهای با درجه روشنی مشابه، درجه ماتی بیشتر و ضخامت کمتر را نتیجه داده است. با توجه به نتایج اشاره شده در بالا، با استفاده از 9/0 درصد Sulvy-x در فرآیند مرکبزدایی میتوان کاغذهای با درجه روشنی و دانسیته بیشتر، درجه زردی کمتر و درجه ماتی مطلوبی تولید کرد.
https://jwfst.gau.ac.ir/article_121_6f310718a8b4d704c992bfcd862bea84.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
Effect of OCC Pulp Fractionation on Paper Properties
اثر جزءجزءسازی بر خواص کاغذ بهدست آمده
از خمیر کاغذ OCC بازیابی شده
103
116
122
FA
Journal Article
2012
07
01
This study sougth to the effect of OCC pulp fractionation on produced paper strength properties improvement. Using a pressure screen, OCC pulp was devided to tow distinct fractions of accept ratio (short fibers) and reject ratio (long fibers) in accordance with optimum condition of fractionation based on the previous studies. In the next stage, long fiber stream was refined and recombined with short fiber stream based on different ratios. Then, hansheets were made of notified recombined pulp, inlet OCC pulp and refined long fiber pulp samples. The results of physical and mechanical tests showed that by increasing short fiber ratio up to 50%, strength properties of produced paper were higher than those of inlet OCC pulp. This indicates the positive effect of fractionation on increasing pulp refining potential and paper strength properties improvement. On the other hand, by not refining 50% of the inlet OCC pulp (short fiber stream), operation capacity of refining process and refining energy consumption increases and decreases, respectively.
در این پژوهش به بررسی اثر جزءجزءسازی خمیرکاغذ OCC بر بهبود ویژگیهای مقاومتی کاغذ بهدست آمده پرداخته شده است. خمیرکاغذ OCC بهوسیله یک غربال فشاری و تحت شرایط عملیاتی بهینه کارآیی جزءجزءسازی براساس مطالعات قبلی، به دو جزء خمیرکاغذ عبوریافته (خمیر الیافکوتاه) و خمیرکاغذ وازده غربال (خمیر الیافبلند) تفکیک گردید. سپس جزء الیافبلند خمیرکاغذ پالایش و با نسبتهای مختلف با جزء الیافکوتاه آن بازترکیب شده و از خمیرکاغذ با نسبتهای ترکیبی مختلف، خمیرکاغذ ورودی اولیه و خمیرکاغذ خالص الیافبلند پالایش شده نمونههای کاغذ دستساز تهیه گردید. نتایج بهدست آمده از آزمونهای فیزیکی و مقاومتی نشان داد که با افزودن تا 50 درصد خمیرکاغذ الیافکوتاه به خمیرکاغذ الیافبلند پالایش شده، مقاومتهای مکانیکی کاغذهای بهدست آمده از خمیرهای کاغذ بازترکیبی از مقاومتهای خمیرکاغذ OCC اولیه بیشتر خواهد شد. این واقعیت بیانگر اثر مثبت عمل جزءجزءسازی در افزایش قابلیت پالایشپذیری خمیرکاغذ و بهبود مشخصههای مقاومتی کاغذ میباشد. از طرفی با حذف 50 درصد از خمیرکاغذ اولیه (خمیرکاغذ الیافکوتاه) از دور پالایش، ظرفیت عملیاتی فرایند پالایش در واحد زمان افزایش قابلملاحظه و انرژی مصرفی پالایش نیز کاهش قابلملاحظهای خواهد یافت.
https://jwfst.gau.ac.ir/article_122_ca4bc13571e6ccd993de150c8fe64522.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
Identification of the Chemical Compounds from
Pyrolysis of Walnut wood at 350 oC by GC/MS
شناسایی ترکیبات شیمیایی بهدست آمده از پیرولیز چوب گردو
در دمای 350 درجه سانتیگراد با استفاده از روشGC/MS
117
128
123
FA
Journal Article
2012
07
01
Walnut is a hardwood tree which covers a wide area of the plantation forest and gardens. The objective of this study was the separation and identification of compounds produced from pyrolysis of walnut wood at fixed bed reactor under an inert gas atmosphere (nitrogen) at 350<sup> o</sup>C for 20 minutes. The separation and identification of compounds from bio-oil treated with N,o-bis (tri methyl sailil) <br />tri fluoro acetamid (BSTFA) were done by using gas chromatography/ mass spectroscopy (GC/MS( technique. Ten compounds were totally identified. The most important compound identified in wood at this range was levoglucosan and <br />α-L-galactofuranosid. The other important compounds observed at 350<sup> o</sup>C were propanoic acid, tetracozan, octamethyltrisiloxane, sailan, 1, 2, 3 butan triol and Tetracosane.
گردو درختی پهنبرگ است که بهصورت دستکاشت در باغات و بهصورت خودرو در مناطق کوهستانی کشور یافت میشود. در این پژوهش جداسازی و شناسایی ترکیبات شیمیایی بهدست آمده از پیرولیز چوب گردو بررسی شد. پیرولیز چوب گردو در راکتور بستر ثابت و در دمای 350 درجه سانتیگراد و در جو نیتروژن بهمدت 20 دقیقه انجام پذیرفت. جداسازی و شناسایی ترکیبات <br />در نمونههای استخراج شده با مشتقسازی توسط بیس تری متیل سایلیل تری فلوئورو استامید <br />و استفاده از دستگاه کروماتوگرافی گازی و طیفسنجی جرمی و مطالعه طیفهای جرمی انجام <br />شد. در مجموع 10 ترکیب شناسایی شدند. فراوانترین ترکیب موجود لووگلوکوزان و آلفا <br />L- گالاکتوفورانوزید بود که بهمیزان 49 درصد مواد مشتق شده را تشکیل میدهند. این ترکیبات بهترتیب از پیرولیز سلولز و همیسلولز موجود در دیواره سلول چوبی که پیش ترکیب اصلی در تشکیل دیواره سلول میباشند بهدست آمده است. سایر مواد شناسایی شده مهم در دمای 350 درجه شامل، سایلان، 1- متوکسی- 3- (2- فنیل اتنیل)- بنزن، 1،2،3- بوتان تری اُل، تری کوزان، پروپانوئیک اسید و اکتا متیل تری سیلوکسیان بود
https://jwfst.gau.ac.ir/article_123_a47e002e661aed3ae2e97593a0576c9a.pdf
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
پژوهشهای علوم و فناوری چوب و جنگل
2322-2077
18
2
2012
07
01
A Comparison between Steam and Water Absorption
Behavior in Polypropylene-Wood Fiber Compo
مقایسه بین روند جذب آب و بخار آب در چندسازه پلیپروپیلن- الیاف چوب
129
134
124
FA
Journal Article
2012
07
01
In this research, water and steam absorption behavior and also effect of maleic anhydride polypropylene (MAPP) on these behaviors in wood fiber-polypropylene composite were compared. For this purpose, the composites were manufactured from 60% fibers and 40% polypropylene in presence and absence of MA. The oven dried samples with dimensions of 2.5×2.5×1 cm were immersed in distilled water and exposed to water steam. Long-term water and steam absorption and thickness swelling of the composites were studied. The results showed that the composites exposed to water steam exhibited higher water absorption and thickness swelling than those immersed in water. The addition of 2% MA decreased steam and water absorption and thickness swelling in studied composites. <br />
در این پژوهش روند جذب آب و بخار آب و همچنین تأثیر سازگارکننده مالئیک انیدرید پلیپروپیلن (MAPP) بر این روند در چندسازه چوب- پلاستیک مقایسه شد. به این منظور چندسازه چوب- پلاستیک با استفاده از 60 درصد الیاف چوب و 40 درصد پلیپروپیلن با و بدون مالئیک انیدرید ساخته شد. سپس نمونههایی به ابعاد 1×5/2×5/2 سانتیمتر تهیه و پس از خشک کردن در آون، در داخل آب مقطر و در معرض بخار آب (دما 100 درجه سانتیگراد) قرار داده شدند. رفتار جذب آب و بخار آب و همچنین واکشیدگی ضخامت طولانیمدت این چندسازه تا رسیدن به نقطه اشباع، مورد بررسی قرار گرفت. نتایج نشان داد چندسازههایی که در معرض بخار آب قرار گرفتند دارای میزان جذب بخار آب و واکشیدگی ضخامت بیشتری در مقایسه با چندسازههای غوطهور شده در آب مقطر میباشند. افزودن 2 درصد سازگارکننده مالئیک انیدرید نیز موجب کاهش قابلتوجهی در میزان جذب آب و بخار آب و همچنین واکشیدگی ضخامت در چندسازه چوب- پلاستیک گردید. <br />
https://jwfst.gau.ac.ir/article_124_cd694f5b3f0a67dc4ea2ebcb95f88ef9.pdf