@article { author = {hosseini, sareh and اولادی, جعفر and امیرنژاد, حمید}, title = {The priority of multi-criteria decision making techniques Entropy, SAW and TOPSIS in the prioritization of ecological, economical and social indexes of national parks}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {1-28}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {National parks have basic role in conservation of natural ecosystem in national and universal area. Since identification and prioritization ecological, economical and social criteria and indexes for assement of national parks are very important. Therfor in this study, we use Delphi questionnaire for identification very important ecological, economical and social criteria and indexes indexes in assement of national parks and Entropy technique used for calculation wight of them. In the continue multi-criteria decision making techniques such as SAW and TOPSIS used for priority of ecological, economical and social indexes of national parks. The analysis of result of study use of Delphi method identificated 129 indexs and 7 criteria from aspect ecologic, economic and social for national park that after customization 89 ecologic indexes, 7 economic indexes and 15 social indexes was determinate. The result of Entropy technique showed that protective and environmental functions criteria whit 0/228161 weight, concervation of biological diversity whit 0/168609 weight, maintenance and development of social functions whit 0/148688 weight and productive capacity and functions whit 0/109170 weight recpectivly had the highest weight . Also the result of TOPSIS and SAW techniques showed that that protective and environmental functions criteria and concervation of biological diversity aspect of ecology have more proity in comparison whit other criterias. The comparison between two methods showed that result of TOPSIS technique is better than result of SAW and it more near than to reality. National parks have basic role in conservation of natural ecosystem in national and universal area. Since identification and prioritization ecological, economical and social criteria and indexes for assement of national parks are very important. Therfor in this study, we use Delphi questionnaire for identification very important ecological, economical and social criteria and indexes indexes in assement of national parks and Entropy technique used for calculation wight of them. In the continue multi-criteria decision making techniques such as SAW and TOPSIS used for priority of ecological, economical and social indexes of national parks. The analysis of result of study use of Delphi method identificated 129 indexs and 7 criteria from aspect ecologic, economic and social for national park that after customization 89 ecologic indexes, 7 economic indexes and 15 social indexes was determinate. The result of Entropy technique showed that protective and environmental functions criteria whit 0/228161 weight, concervation of biological diversity whit 0/168609 weight, maintenance and development of social functions whit 0/148688 weight and productive capacity and functions whit 0/109170 weight recpectivly had the highest weight . Also the result of TOPSIS and SAW techniques showed that that protective and environmental functions criteria and concervation of biological diversity aspect of ecology have more proity in comparison whit other criterias. The comparison between two methods showed that result of TOPSIS technique is better than result of SAW and it more near than to reality.}, keywords = {Multi-criteria Decision Making Techniques,Entropy,SAW,TOPSIS,National Park}, title_fa = {اولویت‌بندی شاخص‌های اکولوژیکی، اقتصادی و اجتماعی پارک‌های ملی با استفاده از تکنیک‌های تصمیم‌گیری چند معیاره (Entropy ، SAW و TOPSIS)}, abstract_fa = {پارک‌های ملی نقشی اساسی در حفاظت اکوسیستم‌های طبیعی در سطح ملی و جهانی‌ دارد از اینرو تعیین و اولویت‌بندی معیارها و شاخص‌های اکولوژیکی، اقتصادی و اجتماعی جهت ارزیابی پارک‌های ملی حائز اهمیت فراوان می‌باشد. لذا در این مقاله، از پرسشنامه‌های دلفی به منظور شناسایی معیارها و شاخص‌های اکولوژیکی، اقتصادی و اجتماعی حایز اهمیت در ارزیابی پارک‌های ملی و از تکنیک آنتروپی به منظور محاسبه وزن آنها استفاده شده است. در ادامه‌ از تکنیک‌های مناسب تصمیم‌گیری چند شاخصه مانند SAW‌وTOPSIS برای اولویت‌بندی معیارها و شاخص‌های اکولوژیکی، اقتصادی و اجتماعی پارک‌های ملی استفاده گردیده است. تجزیه و تحلیل یافته‌های پژوهش با استفاده از روش دلفی، 129 شاخص و 7 معیار را از جنبه‌‌های اکولوژیکی، اقتصادی و اجتماعی برای پارک‌های ملی شناسایی نموده است که بعد از بومی‌سازی 89 شاخص که شامل 67 شاخص اکولوژی، 7 شاخص اقتصادی و 15 شاخص اجتماعی ارائه شد. نتایج وزن‌دهی معیارها از طریق تکنیک Entropy نشان داد که معیار عملکردهای زیست محیطی و حمایتی با وزن (228161/0)، حفاظت از تنوع زیستی با وزن (168609/0)، حفظ، توسعه عملکرد شرایط اجتماعی با وزن (148688/0) و ظرفیت و عملکرد تولید با وزن (109170/0)‌ به ترتیب بیشترین وزن را به خود اختصاص داده‌اند و نتایج اولویت‌بندی معیارها با تکنیک‌های‌ TOPSIS و SAW‌‌نشان داد معیار عملکردهای زیست محیطی و حمایتی و حفاظت از تنوع زیستی از جنبه اکولوژیکی اولویت بالاتری را در قیاس با سایر معیارها دارند. مقایسه نتایج حاصل از دو روش در این تحقیق مبین این است که تکنیک TOPSIS نسبت به SAW نتایج منطقی‌تر و نزدیکتر به واقعیت را ارائه می‌کند. پارک‌های ملی نقشی اساسی در حفاظت اکوسیستم‌های طبیعی در سطح ملی و جهانی‌ دارد از اینرو تعیین و اولویت‌بندی معیارها و شاخص‌های اکولوژیکی، اقتصادی و اجتماعی جهت ارزیابی پارک‌های ملی حائز اهمیت فراوان می‌باشد. لذا در این مقاله، از پرسشنامه‌های دلفی به منظور شناسایی معیارها و شاخص‌های اکولوژیکی، اقتصادی و اجتماعی حایز اهمیت در ارزیابی پارک‌های ملی و از تکنیک آنتروپی به منظور محاسبه وزن آنها استفاده شده است. در ادامه‌ از تکنیک‌های مناسب تصمیم‌گیری چند شاخصه مانند SAW‌وTOPSIS برای اولویت‌بندی معیارها و شاخص‌های اکولوژیکی، اقتصادی و اجتماعی پارک‌های ملی استفاده گردیده است. تجزیه و تحلیل یافته‌های پژوهش با استفاده از روش دلفی، 129 شاخص و 7 معیار را از جنبه‌‌های اکولوژیکی، اقتصادی و اجتماعی برای پارک‌های ملی شناسایی نموده است که بعد از بومی‌سازی 89 شاخص که شامل 67 شاخص اکولوژی، 7 شاخص اقتصادی و 15 شاخص اجتماعی ارائه شد. نتایج وزن‌دهی معیارها از طریق تکنیک Entropy نشان داد که معیار عملکردهای زیست محیطی و حمایتی با وزن (228161/0)، حفاظت از تنوع زیستی با وزن (168609/0)، حفظ، توسعه عملکرد شرایط اجتماعی با وزن (148688/0) و ظرفیت و عملکرد تولید با وزن (109170/0)‌ به ترتیب بیشترین وزن را به خود اختصاص داده‌اند و نتایج اولویت‌بندی معیارها با تکنیک‌های‌ TOPSIS و SAW‌‌نشان داد معیار عملکردهای زیست محیطی و حمایتی و حفاظت از تنوع زیستی از جنبه اکولوژیکی اولویت بالاتری را در قیاس با سایر معیارها دارند. مقایسه نتایج حاصل از دو روش در این تحقیق مبین این است که تکنیک TOPSIS نسبت به SAW نتایج منطقی‌تر و نزدیکتر به واقعیت را ارائه می‌کند.}, keywords_fa = {تصمیم‌گیری چند معیاره,Entropy,SAW,TOPSIS‌,پارک ملی}, url = {https://jwfst.gau.ac.ir/article_2821.html}, eprint = {https://jwfst.gau.ac.ir/article_2821_faf778e19928056958f9db4cce69b64a.pdf} } @article { author = {Mehri Charvdeh, Meisam Mehri Charvdeh and Tajdini, Ajang and Pourmousa, Shadman}, title = {Identifying and ranking of the effective factors on customer loyalty in the wooden furniture industry by ANP and fuzzy DEMATEL approaches in Guilan and Alborz Provinces}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {29-54}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In the today's competitive world, one of the most important marketing strategies for manufacturing companies is customer-oriented approach, in a way that creates value for them, leading to the formation of loyal customers. Customer loyalty is a multi-criteria decision problem that influences different factors. In this paper, the basic and effectiveness factors of customer loyalty were identified using relevant literature, the specialist's opinions and by a multi-criteria decision approach combining ANP and fuzzy DEMATEL an integrated process were presented for ranking the factors affecting customer loyalty in the industry of wooden furniture. The results indicate that among the main factors, customer satisfaction (0.025), perceived quality of interactive elements service (0.020) and the perceived image of the company (0.016) respectively are more important. In the following factors of customer satisfaction, the most important from the perspective of individual product is the mentioned product price (0.025).The second and third are the products diversity index (0.006) and quality of the product (0.003) respectively. The company's reputation (0.038), credibility and reputation of the brand (0.027), and advertising and promoting(0.019) measures are the most important sub-index of the perceived image of the company respectively. The most important factors of perceived quality of interactive elements service in terms of respondents were product availability (0.027) and replacement inferior product (0.018).Track customer complaints (0.010), the mentioned sellers desired behavior (0.005) are in the following importance categories.}, keywords = {ranking,Customer loyalty,ANP,Fuzzy DEMATEL,Wooden furniture}, title_fa = {شناسایی و رتبه بندی عوامل مؤثر بر وفاداری مشتریان در صنعت مبلمان چوبی با استفاده از فرایند تحلیل شبکه ای ودیمتیل فازی در استان های البرزو گیلان}, abstract_fa = {در دنیای پررقابت کنونی ، یکی از مهمترین استراتژی های بازاریابی برای شرکت های تولیدی ،رویکرد مشتری مداری می باشد، به نحوی که سبب ایجاد ارزش برای آنها شده و منجر به شکل گیری مشتریان وفادار گردد.مساله وفاداری مشتریان یک مساله تصمیم گیری چند معیاره است که تحت تاثیر عوامل گوناگونی می‌باشد. در این پژوهش ، شاخص‌های اساسی و اثربخش وفاداری مشتریان،در صنعت مبلمان چوبی با بررسی ادبیات مربوطه شناسایی و با استفاده از یک روش ترکیبی فرایند تحلیل شبکه ای و دیمتیل فازی ، الگویی نظام‌مند برای رتبه‌بندی دراستان های البرز و گیلان ،ارائه شد.نتایج نشان می دهد که در بین شاخص های اصلی مساله رضایت مشتری(025/0)، کیفیت درک شده از عناصر تعاملی خدمت(020/0)، و تصویردرک شده از شرکت مورد نظر(016/0) از دیدگاه مصاحبه شوندگان به ترتیب دارای اهمیت بیشتری می‌باشند. در مورد زیر شاخص‌های رضایت مشتری، مهمترین زیر شاخص از دیدگاه افراد ،قیمت محصول(025/0) ذکر شده است. پس از این زیر شاخص تنوع محصولات در رده دوم قرار دارد(006/0). رده سوم برای زیر شاخص رضایت مشتری که متعلق به کیفیت محصولات است(003/0).خوشنامی شرکت مورد نظر(038/0)، اعتبار و خوشنامی نام تجاری(027/0)، و تبلیغات و اقدامات ترویجی و تشویقی (019/0)به ترتیب مهم‌ترین زیر شاخص‌های تصویر درک شده از شرکت مورد نظر هستند. مهم‌ترین زیر شاخص در بین زیر شاخص‌های کیفیت درک شده از عناصر تعاملی خدمت از نظر افراد پاسخ دهنده در دسترس بودن محصول(027/0) و تعویض محصول نامرغوب(018/0) بوده است. پیگیری شکایات مشتریان (010/0)و برخورد مناسب فروشندگان مورد نظر(005/0) در رده‌های بعدی اهمیت قرار دارند.}, keywords_fa = {رتبه بندی,وفاداری مشتریان,فرایند تحلیل شبکه ای,دیمتیل فازی,مبلمان چوبی}, url = {https://jwfst.gau.ac.ir/article_2812.html}, eprint = {https://jwfst.gau.ac.ir/article_2812_4435ea560776153e6f6c0335fa3f995f.pdf} } @article { author = {Shabanian, Naghi and رحمانی, محمدشفیع and علیخانی, لیلا and بدخشان, هدیه}, title = {Genotypic and phenotypic diversity of Lebanon oak (Quercus libani) populations in north Zagros forests revealed by molecular SCoT marker, and morphological and biochemical properties}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {55-78}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this work, the genotypic and phenotypic diversity of 109 individuals from nine populations of Lebanon oak (Quercus libani) of north-Zagros forests was investigated using start codon targeted (SCoT) molecular marker, and leaf morphological and biochemical characteristics. Cluster analysis of all phenotypic data grouped the studied populations into five main clusters. Totally, ten SCoT primers produced 101 amplification products, of which 92 fragments (90%) were polymorphic. Nei’s gene diversity (h) and Shannon’s diversity index (I) were relatively high at the both species (h =0.284, I = 0.431) and population (h = 0.258, I = 0.279) levels. High phenotypic and genetic diversity demonstrated that Lebanon oak populations in north Zagros forests maintained a high level of variation. The estimated GST (0.29) showed that the most revealed genetic diversity resided within populations (87%), which was identified with the moderate gene flow level (Nm = 1.175). The relatively high intra-population genetic diversity and low inter-population genetic differentiation was largely attributed to long distance dispersal of pollen, and continuous distribution of populations. Mantel test indicated no significant correlation between genetic and geographic distances among populations. Breeding systems characteristics, genetic drift and extensive gene flow are probably important factors for explaining this differentiation.}, keywords = {Morphological marker,Cluster analysis,Molecular diversity,Start codon targeted (SCoT),Oak}, title_fa = {آشکارسازی تنوع ژنوتیپی و فنوتیپی جمعیت‌های وی‌ول (Quercus libani) در جنگل‌های زاگرس شمالی با استفاده از نشانگر مولکولی SCoT و مشخصه‌های ریخت‌شناختی‏‏ و بیوشیمیایی}, abstract_fa = {در این گزارش تنوع ژنوتیپی و فنوتیپی 109 پایة نمونه‌برداری شده از نه جمعیت وی‌ول (Quercus libani) در جنگل‌های زاگرس شمالی با استفاده از نشانگر مولکولی چندشکلی نواحی هدف کدون شروع (SCoT)، و مشخصه‌های ریخت‌شناختی و بیوشیمیایی برگ مطالعه شده است. تجزیة خوشه‌ای مجموع داده‌های فنوتیپی، جمعیت‌های مورد مطالعه را در پنج خوشة اصلی گروه‌بندی کرد. در مجموع، 10 آغازگر SCoT 101 نوار را در ژنوتیپ‌های مورد مطالعه تکثیر کردند که از این تعداد 92 نوار (90 درصد) چندشکل بودند. تنوع ژنی نی (h) و شاخص تنوع شانون (I) در هر دو سطح گونه و جمعیت بالا بودند (به‌ترتیب 284/0 و 258/0 در سطح گونه و 431/0 و 279/0 در سطح جمعیت). تنوع بالای فنوتیپی و ژنتیکی نشان داد که جمعیت‌های وی‌ول زاگرس شمالی تنوع بالایی را در خود حفظ کرده‌اند. مقدار GST برآورد شده (29/0) نشان داد که بخش عمدة تنوع ژنتیکی آشکار شده مربوط به تنوع درون جمعیت‌هاست (87 درصد)، که جریان ملایم ژنی بین جمعیت‌‌ها Nm) = 175/1) نیز آن را تأیید کرد. تنوع ژنتیکی نسبتاً بالای درون‌گونه‌ای و تمایز ژنتیکی نسبتاً پایین بین‌جمعیتی به میزان زیادی ناشی از پخش‌شدگی دانة گرده و پیوستگی پراکنش این گونه در مناطق مورد مطالعه است. بر اساس آزمون مانتل همبستگی ماتریس‌های فاصلة حاصل از مختصات جغرافیایی و ماتریس تشابه حاصل از نشانگرهای SCoT معنی‌دار نبود، که ویژگی‌های سیستم تلاقی، رانش ژنتیکی و جریان گستردة ژنی معمول در جوامع بلوط‌ را می‌توان عوامل مهم دخیل در این وضعیت دانست.}, keywords_fa = {نشانگر ریخت‌شناختی,تجزیۀ خوشه‌ای,تنوع مولکولی,چندشکلی نواحی هدف کدون شروع (SCoT),بلوط}, url = {https://jwfst.gau.ac.ir/article_2813.html}, eprint = {https://jwfst.gau.ac.ir/article_2813_d0e08944ab041ff6fc9e110f8913d30e.pdf} } @article { author = {صارمی, کوروش}, title = {investigation on introducing epoxy in soy oil for producing wheat straw board}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {79-102}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this study using formic acid and hydrogen peroxide was bearing epoxy crude soybean oil, Acrylated Epoxidized Soybean Oil resin (AESO) production and its properties were investigated. Wheat straw particle boards were produced by the synthesized resin with 8% and 13 % contents based on straws weight at three pressing times:8,10 and 12 min. Boards’ modulus of rapture, modulus of elasticity, internal bonding, minimum degree of thickness change and water absorption were investigated. The swelling and water absorption results showed that the highest amounts of boards’ modulus of rapture, modulus of elasticity, internal bonding with board samples of lowest thickness belong to boards made from 13% resin content with 12 minute pressing time; and these amounts were highest to compared Wheat Straw particle boards were produced by the Urea formaldehyde resin. In addition to modifying the resin, the AESO – wheat straw particleboard due to its non – formaldehyde emission and bio – based structure can substitute wood particleboard effectively.}, keywords = {Acrylic Epoxidized Soy Oil resin,Wheat Straw particle boards,Urea formaldehyde,formic acid,Hydrogen Peroxide}, title_fa = {بررسی امکان اپوکسی دار کردن روغن سویا برای تولید تخته کاه گندم}, abstract_fa = {در این پژوهش بتدا با استفاده از اسید فرمیک و آب اکسیژنه روغن سویای خام اپوکسی دار شد،سپس رزین سویا اپوکسی دار شده آکریلیکی تولید و خواص آن بررسی شد.با استفاده از رزین در دو سطح ۸و ۱۳ درصد وزنی و در سه زمان پرس ۸،۱۰ و۱۲دقیقه ،تخته خرده کاه ساخته شد.مقاومت خمشی،مدول کشسانی خمشی،چسبندگی داخلی،واکشیدگی ضخامت و جذب آب تخته های حاصل بررسی شد.نتایج نشان می دهد،بیشترین مقدار مقاومت خمشی،مدول الاستیسیته،چسبندگی داخلی و هم چنین کمترین مقدار واکشیدگی ضخامت و جذب آب مربوط به تخته خرده کاه ساخته شده با مقدار رزین مصرفی ۱۳ درصد وزنی و زمان پرس ۱۲دقیقه است که مقادیر مزبور در مقایسه با تخته خرده کاه ساخته شده با چسب اوره فرمالدهید بیشتر بود. در ضمن با اصلاح این رزین،تخته های حاصله به لحاظ عدم تولید فرمالدهید و ساختار طبیعی آن نیز جایگزین مناسبی برای تخته خرده چوب است.}, keywords_fa = {رزین اپوکسی سویای آکریلیکی,تخته‌خرده از کاه گندم,اوره فرمالدهید,اسید فرمیک,آب اکسیژنه}, url = {https://jwfst.gau.ac.ir/article_2814.html}, eprint = {https://jwfst.gau.ac.ir/article_2814_4ca348da0f15c25ce5b2102220098efb.pdf} } @article { author = {mustafa, mohsen and Parsakhoo, Aidin and Shataee Joybari, Shaban and Lotfalian, Majid and Hatami, Nishtman}, title = {Comparison of economic performance of two the traditional transportation systems on ‎poplar and willow timbers (case study: Kurdistan province)‎}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {103-122}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Comparison of economic performance of two traditional transportation systems on poplar and ‌willow timbers (case study: Kurdistan province)‌AbstractBackground and objectives:‌‌ Animal logging and river transportation are traditional systems for transporting the poplar and willow ‌timbers from the margins of rivers in Kurdistan province.‌Materials and methods:‌‌ This research initially introduces the river transportation system for wood extraction and then ‌compares this system with mule logging from economic point of view. At first, the river transportation ‌routes in study area were taken by GPS. River properties including, velocity, gradient, width, depth, ‌flow discharge and transportation velocity of 1 and 3.5 meters of poplar and willow were measured. ‌The economic performance of mule logging was calculated from cost, logging time and number of ‌labor information. ‌Results:‌‌ Results showed that the Hourly cost of timber transportation by mule and river were 225000 and ‌‌100000 Rials, respectively. The mean of transportation velocity of timber by mule was lower than that ‌of water flow.‌ConclusionIt was concluded that in the study area the transportation cost and time by river was more suitable than ‌animal logging.‌Keywords: Wood plantation, River transportation, Draft animal, Cost transportation, Boridar village.‌Comparison of economic performance of two traditional transportation systems on poplar and ‌willow timbers (case study: Kurdistan province)‌AbstractBackground and objectives:‌‌ Animal logging and river transportation are traditional systems for transporting the poplar and willow ‌timbers from the margins of rivers in Kurdistan province.‌Materials and methods:‌‌ This research initially introduces the river transportation system for wood extraction and then ‌compares this system with mule logging from economic point of view. At first, the river transportation ‌routes in study area were taken by GPS. River properties including, velocity, gradient, width, depth, ‌flow discharge and transportation velocity of 1 and 3.5 meters of poplar and willow were measured. ‌The economic performance of mule logging was calculated from cost, logging time and number of ‌labor information. ‌Results:‌‌ Results showed that the Hourly cost of timber transportation by mule and river were 225000 and ‌‌100000 Rials, respectively. The mean of transportation velocity of timber by mule was lower than that ‌of water flow.‌ConclusionIt was concluded that in the study area the transportation cost and time by river was more suitable than ‌animal logging.‌Keywords: Wood plantation, River transportation, Draft animal, Cost transportation, Boridar village.‌Comparison of economic performance of two traditional transportation systems on poplar and ‌willow timbers (case study: Kurdistan province)‌AbstractBackground and objectives:‌‌ Animal logging and river transportation are traditional systems for transporting the poplar and willow ‌timbers from the margins of rivers in Kurdistan province.‌Materials and methods:‌‌ This research initially introduces the river transportation system for wood extraction and then ‌compares this system with mule logging from economic point of view. At first, the river transportation ‌routes in study area were taken by GPS. River properties including, velocity, gradient, width, depth, ‌flow discharge and transportation velocity of 1 and 3.5 meters of poplar and willow were measured. ‌The economic performance of mule logging was calculated from cost, logging time and number of ‌labor information. ‌Results:‌‌ Results showed that the Hourly cost of timber transportation by mule and river were 225000 and ‌‌100000 Rials, respectively. The mean of transportation velocity of timber by mule was lower than that ‌of water flow.‌ConclusionIt was concluded that in the study area the transportation cost and time by river was more suitable than ‌animal logging.‌Keywords: Wood plantation, River transportation, Draft animal, Cost transportation, Boridar village.‌}, keywords = {Keywords: Wood plantation,River transportation,Draft animal,Cost transportation,Boridar village‎}, title_fa = {بررسی عملکرد اقتصادی روش‌های سنتی حمل و نقل چوب در مزارع بید و صنوبر (مطالعه‌موردی: استان ‏کردستان)‏}, abstract_fa = {سابقه و هدف: استفاده از جریان رودخانه و حیوانات بارکش از روش‌های سنتی حمل مقطوعات صنوبر و بید کشت شده ‌در ‌حاشیه ‌رودخانه‌های استان کردستان می‌باشد. مواد و روش‌ها: در این تحقیق ضمن معرفی روش حمل چوب با استفاده از ‌رودخانه ‌مقایسه راندمان ‌اقتصادی آن با روش حمل و نقل چوب با قاطر انجام شد. ابتدا مسیرهای حمل چوب در رودخانه‌های مورد ‌مطالعه ‌با استفاده از دستگاه ‌موقعیت یاب جهانی‌(GPS)‌‌ برداشت شد. سپس مشخصات رودخانه شامل سرعت، شیب، عرض، عمق، ‌دبی ‌جریان و همچنین سرعت حمل ‌قطعات 1 و 5/3 متری چوب صنوبر و بید مورد اندازه‌گیری قرار گرفت. عملکرد اقتصادی ‌حمل ‌چوب با استفاده از قاطر نیز با بهره‌گیری از ‌اطلاعات هزینه، مدت زمان حمل و تعداد کارگر ثبت گردید. یافته‌ها و نتیجه ‌گیری ‌کلی: هزینه ساعتی حمل چوب با قاطر و رودخانه به ‌ترتیب 225000 و 100000 ریال به دست آمد. میانگین سرعت حمل ‌چوب ‌با استفاده از قاطر کمتر از روش حمل چوب با استفاده از رودخانه ‌بود. نتایج به دست آمده نشان داد که حمل چوب با استفاده ‌از ‌نیروی آب نسبت به حمل آن با استفاده از حیوانات بارکش سریع‌تر و با هزینه ‌کمتر صورت گرفت. چکیدهسابقه و هدف: استفاده از جریان رودخانه و حیوانات بارکش از روش‌های سنتی حمل مقطوعات صنوبر و بید کشت شده ‌در ‌حاشیه ‌رودخانه‌های استان کردستان می‌باشد. مواد و روش‌ها: در این تحقیق ضمن معرفی روش حمل چوب با استفاده از ‌رودخانه ‌مقایسه راندمان ‌اقتصادی آن با روش حمل و نقل چوب با قاطر انجام شد. برداشت ‌چکیدهسابقه و هدف: استفاده از جریان رودخانه و حیوانات بارکش از روش‌های سنتی حمل مقطوعات صنوبر و بید کشت شده ‌در ‌حاشیه ‌رودخانه‌های استان کردستان می‌باشد. مواد و روش‌ها: در این تحقیق ضمن معرفی روش حمل چوب با استفاده از ‌رودخانه ‌مقایسه راندمان ‌اقتصادی آن با روش حمل و نقل چوب با قاطر انجام شد. ابتدا مسیرهای حمل چوب در رودخانه‌های مورد ‌مطالعه ‌با استفاده از دستگاه ‌موقعیت یاب جهانی‌(GPS)‌‌ برداشت شد. سپس مشخصات رودخانه شامل سرعت، شیب، عرض، عمق، ‌دبی ‌جریان و همچنین سرعت حمل ‌قطعات 1 و 5/3 متری چوب صنوبر و بید مورد اندازه‌گیری قرار گرفت. عملکرد اقتصادی ‌حمل ‌چوب با استفاده از قاطر نیز با بهره‌گیری از ‌اطلاعات هزینه، مدت زمان حمل و تعداد کارگر ثبت گردید. یافته‌ها و نتیجه ‌گیری ‌کلی: هزینه ساعتی حمل چوب با قاطر و رودخانه به ‌ترتیب 225000 و 100000 ریال به دست آمد. میانگین سرعت حمل ‌چوب ‌با استفاده از قاطر کمتر از روش حمل چوب با استفاده از رودخانه ‌بود. نتایج به دست آمده نشان داد که حمل چوب با استفاده ‌از ‌نیروی آب نسبت به حمل آن با استفاده از حیوانات بارکش سریع‌تر و با هزینه ‌کمتر صورت گرفت. چکیدهسابقه و هدف: استفاده از جریان رودخانه و حیوانات بارکش از روش‌های سنتی حمل مقطوعات صنوبر و بید کشت شده ‌در ‌حاشیه ‌رودخانه‌های استان کردستان می‌باشد. مواد و روش‌ها: در این تحقیق ضمن معرفی روش حمل چوب با استفاده از ‌رودخانه ‌مقایسه راندمان ‌اقتصادی آن با روش حمل و نقل چوب با قاطر انجام شد. برداشت ‌چکیدهسابقه و هدف: استفاده از جریان رودخانه و حیوانات بارکش از روش‌های سنتی حمل مقطوعات صنوبر و بید کشت شده ‌در ‌حاشیه ‌رودخانه‌های استان کردستان می‌باشد. مواد و روش‌ها: در این تحقیق ضمن معرفی روش حمل چوب با استفاده از ‌رودخانه ‌مقایسه راندمان ‌اقتصادی آن با روش حمل و نقل چوب با قاطر انجام شد. ابتدا مسیرهای حمل چوب در رودخانه‌های مورد ‌مطالع ‌‌.‌‌ سابقه و هدف: استفاده از جریان رودخانه و حیوانات بارکش از روش‌های سنتی حمل مقطوعات صنوبر و بید کشت شده ‌در ‌حاشیه ‌رودخانه‌های استان کردستان می‌باشد. مواد و روش‌ها: در این تحقیق ضمن معرفی}, keywords_fa = {واژه‌های کلیدی: زراعت چوب,حمل و نقل رودخانه‌ای,حیوانات بارکش,روستای بوریدر,هزینه انتقال.‏}, url = {https://jwfst.gau.ac.ir/article_2815.html}, eprint = {https://jwfst.gau.ac.ir/article_2815_8700831d85ba7c1024376510464d9a55.pdf} } @article { author = {Waez-Mousavi, S.M. and Habashi, Hashem and Sagheb-Talebi, Khosro}, title = {Effect of Single-Tree Selection System on Regeneration in a Mixed Beech Forest (Case Study: Dr. Bahramnia Forestry Management Plan)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {125-146}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Planning for regeneration establishment in forest is possible through silvicultural systems. One of these systems which is in most accordance with close-to-nature silviculture is selection system. This investigation was done to assess the effects of single-tree selection system on regeneration in mixed beech stands. Therefore 102 canopy gaps, including 15 in virgin stands, 43 natural and 44 artificial gaps within managed stands, were selected within a forest with species mixture of beech (Fagus orientalis Lipsky), Persian ironwood (Parrotia persica C.A.Mey.) and hornbeam (Carpinnus betulus L.). The status of regeneration was studied in 5 microplots with the area of 1 m2 within each gap. For each microplot some properties such as frequency, collar diameter and health condition of saplings were recorded. Results showed that beech regeneration is the most frequent species in the gaps. Diameter class distribution for most species was negative exponential distribution. Frequency of different species in diameter classes was not significantly different among three gap types. Increasing in gap size caused reduction in density of regeneration. Best health condition of regeneration found in natural gaps within the managed stands and worst status was in gaps within the virgin stands. Totally it can be concluded that single-tree selection is a suitable system for this forest which its implementation caused no significant change in the regeneration status of managed stands in comparison to unmanaged stands.}, keywords = {Silviculture,Single-tree selection,regeneration,Canopy gap,Managed stand}, title_fa = {تاثیر اجرای شیوه جنگل‌شناسی تک گزینی بر زادآوری در راشستان آمیخته (مطالعه موردی: طرح جنگل‌داری دکتر بهرام نیا)}, abstract_fa = {برنامه ریزی به منظور استقرار زادآوری در جنگل در قالب شیوه‌های جنگل‌شناسی انجام می گیرد. یکی از شیوه‌های جنگل‌شناسی که بیشترین کاربرد و تطابق را با دیدگاه‌های جنگل‌شناسی نزدیک به طبیعت دارد، شیوه گزینشی است. این پژوهش با هدف بررسی اثر اجرای شیوه تک گزینی بر وضعیت زادآوری در یک جنگل راش آمیخته شرق هیرکانی انجام شد. به این منظور در توده‌هایی با ترکیب گونه‌ای راش، انجیلی و ممرز، 102 روشنه شامل 15 روشنه در توده بکر و 43 روشنه طبیعی و 44 روشنه مصنوعی نیز در توده مدیریت شده انتخاب شدند. سپس وضعیت زادآوری در هر روشنه در 5 میکروپلات یک مترمربعی مورد بررسی قرار گرفت. در هر میکروپلات ویژگی‌هایی از قبیل فراوانی، قطر یقه و وضعیت سلامت نهال‌ها ثبت گردید. نتایج نشان داد که نهال‌های گونه‌ی راش بیشترین فراوانی را در روشنه‌ها به خود اختصاص می دهند. پراکنش تعداد در طبقات قطری زادآوری بیشتر گونه‌ها حالت نمایی کاهنده داشت. بین سه نوع روشنه از نظر فراوانی تعداد در طبقات قطری گونه‌های مختلف هیچ گونه اختلاف معنی داری مشاهده نشد. همچنین نتایج نشان داد که با افزایش وسعت روشنه‌ها از تراکم زادآوری کاسته می‌شود. به لحاظ وضعیت سلامت زادآوری‌ها نیز بهترین وضعیت در روشنه‌های طبیعی واقع در توده‌های مدیریت شده و نامناسب‌ترین حالت نیز در روشنه‌های بکر مشاهده گردید. در مجموع با توجه به نتایج حاصل، می توان شیوه تک گزینی را شیوه‌ای مناسب برای این جنگل ارزیابی نمود که اجرای آن تغییرات معنی داری در وضعیت زادآوری توده‌های مدیریت شده نسبت به توده‌های بکر ایجاد نکرده است.}, keywords_fa = {زادآوری,روشنه,جنگل‌شناسی نزدیک به طبیعت,تک گزینی,جنگل شصت‌کلاته}, url = {https://jwfst.gau.ac.ir/article_2816.html}, eprint = {https://jwfst.gau.ac.ir/article_2816_5366cd0e17f17095f5b0a139ac20a856.pdf} } @article { author = {بیات کشکولی, علی and کیخا, علیرضا and Rafighi, Ali}, title = {The effect trade indexes on each others in world forest products}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {147-166}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Trader countries of forest products have well profit. Commonly, these are developed countries that use the natural forest and tree plantation. One of the principles of trade effective is following; identification the effect of trade index such as price of export and import and also quantity of product, import and export on each others. Therefore, the basic of questions as fallow: how is the effect of some trades variables on each others? Since, econometric methods such as Vector Autoregressive (VAR) and Impulse Response Functions (IRF) were used. VAR results were showed that mostly, the effect of price of export and import on the prices, quantity of import, export and product are significant in world forest products particularly; fiberboard and sawn-wood. IRF results were showed that the shocks effect of quantity of import on the quantity of export and product are divergent in wood based panel and fiberboard and also, the effects were confirmed by VAR. The increased production of fiberboard is showed in production of medium density fiberboard (MDF) Iran. Convergence of variables effects and the lack of significant variables effects on the each others could be because of production and import of forest products is required for resolve local needs.}, keywords = {forest products,trade variables,Vector Autoregressive,Impulse Response Functions}, title_fa = {بررسی اثرات متقابل شاخص‌های تجاری چوب و محصولات چوبی}, abstract_fa = {کشورهای تجارت کننده محصولات چوبی سودآوری خوبی دارند و غالبا کشورهای توسعه یافته‌ای هستند که از منابع جنگلی طبیعی و مصنوعی جهان بهره برداری می‌کنند. یکی از مبانی کارآمدی این تجارت، شناخت تأثیرات شاخص‌های تجارت مانند قیمت صادرات و واردات و مقدار تولید، صادرات و واردات بر همدیگر است. حال برای یافتن چگونگی این تأثیر از روش‌های اقتصاد سنجی الگوی خودرگرسیون برداری و توابع عکس العمل آنی استفاده شد. نتایج الگوی خودرگرسیون برداری نشان می‌دهد که غالبا تأثیر قیمت صادرات و واردات این محصولات به ویژه انواع تخته فیبر و چوب آلات بریده بر قیمت‌ها و مقدار صادرات، واردات و تولید معنی دار می‌باشد. توابع عکس العمل آنی نشان می‌دهد که اثر شوک مقدار واردات اوراق فشرده چوبی و انواع تخته فیبر بر مقدار صادرات و تولید این محصولات واگرا می‌باشد و روش الگوی خودرگرسیون برداری نیز آن را تائید می‌کند. این اثر در افزایش تولید تخته فیبر با دانسیته متوسط ایران نیز مشاهده شده است. تولید و واردات محصولات چوبی برای رفع نیازهای داخلی کشورها می‌تواند به علت بی‌کشش بودن مقدار واردات به تغییرات قیمت آنها، باعث همگرایی اثرات متغیرها و معنی دار نبودن این اثرات برهمدیگر شود.}, keywords_fa = {محصولات چوبی,متغیرهای تجارت,الگوی خودرگرسیون برداری,توابع عکس العمل آنی}, url = {https://jwfst.gau.ac.ir/article_2811.html}, eprint = {https://jwfst.gau.ac.ir/article_2811_04e0180f33f9f87d93c26f04b43c3624.pdf} } @article { author = {رسولی, اسماعیل and رشیداوی, جلیل and رمضانی, امید and سرائیان, احمدرضا}, title = {Effect of Depithing on Bagasse pulp and paper properties}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {167-186}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {The effect of depithing levels on bagasse soda pulping and its pulp and paper properties were studied in Pars paper factory. Bagasse with different levels of depithing (i.e. bagasse with 30, 20, 10, 5 and 0 % of pith) were cooked under the same pulping condition as used in pars factory: chemical charge 15% of sodium hydroxide (NaOH applied based on dry fibre), temperature: 170 °C, cooking time: 15 minutes and L:W= 10:1. Effects of different level of pith on residual active alkali and pulp and paper properties were investigated. Results have shown that by pith level decreasing in raw material, the residual active alkali in black liquor increased and pulp properties such as kappa number, screen yield, shive content, initial freeness and drainage time improved. Also, strength properties of paper such as tear, burst and tensile increased. In addition, comparing these results to pulping conditions of above factory indicated that the efficiency of factory depithing process is very low. Therefore, its effect appears in high level of pith and consequently high chemical consumption in digester and hence contributes to the inferior quality of pulp and paper properties.}, keywords = {Bagasse,Pith,Depithing,Active Alkali,strength properties}, title_fa = {اثر حذف مغز بر ویژگیهای خمیرسازی و کاغذ حاصل از باگاس}, abstract_fa = {این تحقیق به منظور بررسی اثر میزان مغز‌زدائی بر شرایط خمیرسازی و ویژگیهای خمیر و کاغذ سودای باگاس در کارخانه کاغذ پارس صورت پذیرفت. از اینرو‌ باگاس با سطوح مختلف مغز‌زدایی(30، 20، 10، 5 و صفر درصد مغز) با شرایط پخت ثابت: دما 170 درجه سلسیوس، زمان پخت 15 دقیقه، قلیایی مصرفی 15درصد و 10:1 L:W= پخت گردید. تأثیر سطوح مختلف مغز بر قلیای فعال باقیمانده در لیکور سیاه، و ویژگی‌های خمیر و کاغذ حاصله مورد بررسی قرار گرفت. نتایج نشان داد که با کاهش مغز در باگاس، قلیای فعال باقیمانده در لیکور سیاه افزایش یافته و ویژگی‌های خمیر کاغذ حاصل مانند عدد کاپا، بازده بعد از الک، میزان ریزه چوب، درجه روانی اولیه و زمان آبگیری بهبود می‌یابد. همچنین خواص مقاومتی کاغذ مانند مقاومت در برابر پارگی و مقاومت در برابر ترکیدن افزایش چشم گیری یافته است. بعلاوه، مقایسه این نتایج با شرایط خمیر و کاغذسازی کارخانه نشان داد که کارائی واحد مغز زدائی کارخانه بسیار پائین بوده بطوریکه اثر آن بصورت حضور بیشتر مغز و متعاقب آن مصرف مواد بیشتر در واحد خمیر سازی خود را نشان داده و خمیر و کاغذ حاصله از کیفیت مطلوبی برخوردار نمی باشد.}, keywords_fa = {باگاس,پیت,پیت زدائی,قلیای فعال,خواص مقاومتی}, url = {https://jwfst.gau.ac.ir/article_2817.html}, eprint = {https://jwfst.gau.ac.ir/article_2817_897a2c5338912b005d894f93027c30ac.pdf} } @article { author = {Kord, Behzad}, title = {Effect of Filler Content and Compatibilizer on Thermal Properties of Wood Flour - HDPE Composites}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {187-204}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this study, the effect of filler content and compatibilizer on thermal properties of wood flour - high density polyethylene (HDPE) composites was investigated. To meet this objective, HDPE and wood flour (50, 60 and 70 wt %) with coupling agent (0, 2 and 4 wt %) were compounded in an internal mixer, and samples were fabricated by injection molding. Thermal properties and fractional crystallinity of samples were studied by thermogravimetric analysis (TGA) and differential scanning calorimetriy (DSC). The lower weight loss at higher temperature was found for composites containing higher amount of wood flour; Also, the thermal properties of composite samples increased with the increasing of wood flour up to loading fraction of 60%, but decreased using higher (70) wood flour loading fraction. The positive effect of filler on thermal properties is related to wood flour acted as nucleating agent, and decrease the thermal properties at higher filler content levels is probably due to the stop the growth of crystals and the formation of amorphous. Besides, the adding of compatibilizer to the composites boosted the thermal stability and fractional crystallinity of samples. The scanning electron microscopy (SEM) micrographs demonstrate a better adhesion between the HDPE and wood flour due to the presence of the coupling agent.}, keywords = {Composite,Thermal properties,Fractional crystallinity,TGA,DSC}, title_fa = {تأثیر مقدار ماده پرکننده و سازگارکننده بر خواص گرمایی چندسازه حاصل از آرد چوب- پلی اتیلن سنگین}, abstract_fa = {این تحقیق با هدف بررسی تأثیر مقدار ماده پرکننده و سازگارکننده بر خواص گرمایی چندسازه ساخته شده از آرد چوب- پلی اتیلن سنگین انجام شد. برای این منظور، پلی اتیلن و آرد چوب (در سه سطح 50، 60 و 70 درصد وزنی) به همراه ماده سازگارکننده (در سه سطح 0، 2 و 4 درصد وزنی) در دستگاه مخلوط کن داخلی ترکیب شده و نمونه های آزمونی با استفاده از روش قالب گیری تزریقی ساخته شد. خواص گرمایی نمونه ها شامل پایداری گرمایی و مقدار بلورینگی با استفاده از تجزیه وزن سنجی گرمایی (TGA) و روش گرماسنجی روبشی تفاضلی (DSC) مورد مطالعه قرار گرفت. مقایسه نتایج کاهش وزن نشان داد که نمونه های دارای مقادیر بیشتر آرد چوب، در دماهای بالاتر کاهش وزن کمتری دارند. همچنین با افزایش مقدار آرد چوب تا سطح 60%، خواص گرمایی چندسازه افزایش یافت، با این وجود افزایش بیشتر آرد چوب (تا سطح 70%) موجب افت خواص گرمایی نمونه ها شد. روند افزایشی خواص گرمایی در اثر حضور پرکننده به نقش هسته زایی ذرات آرد چوب و کاهش خواص گرمایی در سطوح بالای اختلاط پرکننده به متوقف شدن رشد بلورها و تشکیل نقاط بی شکل نسبت داده شد. از طرف دیگر افزودن سازگارکننده موجب افزایش پایداری حرارتی و میزان بلورینگی چندسازه شد. نتایج میکروسکوپ الکترونی پویشی نشان داد که افزودن ماده سازگارکننده سبب بهبود چسبندگی بین پلیمر و آرد چوب می شود.}, keywords_fa = {چندسازه,خواص گرمایی,میزان بلورینگی,وزن سنجی گرمایی,گرماسنجی روبشی تفاضلی}, url = {https://jwfst.gau.ac.ir/article_2818.html}, eprint = {https://jwfst.gau.ac.ir/article_2818_3b9d56529e9248003e76d0e6110425d6.pdf} } @article { author = {Ezzati, Sattar and نجفی, اکبر and عباسی, محمود and Ghajar, Ismael}, title = {Assessment efficiency of HSM904 grapple skidder on Longitudal different levels of skid trail slope}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {205-222}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In ground-base skidding operations several factors are influences on skidding time such as slope of skid trail, volume, number and length of logs per turn and direction of skidding by skidder machinery. To achieve this purpose, efficiency of skidder HSM904 in cut-to-length method was studied on district #2 (Arzanfun), Mazandaran wood and paper forests. We delineated six slope classes on a skid trail by 700 meters in length, before skidding operation which was running contrary to the slope (uphill skidding). During skidding operation 2 volume classes includes (3.5 m3 ) and number of logs per turn includes (up to 2 and more than 2 logs per turn) were selected. The results from 156 time cycles based on time study showed that in travels without load slope class (13-16%) has been significantly effect on skidder efficiency. The least speed’s skidder was recorded in slope class (22-25%). Speed of skidder decrease with increase slope skid trail, so that in travel with load, slope class (10-13%) has been more effect on skidder speed. So the least speed’s skidder was recorded in slope classes (19-28%) in combine. The results also firmed that the effects of load volume was significant on skidder efficiency, while number of logs was not significantly effect. The greatest efficiency skidder HSM904 was recorded in slopes (13-16%) in travel without load and (22-13%) as safe slope in uphill skidding by skidder HSM904 in the study area.}, keywords = {Arzafun district,Continues time study,Cut-to-length system,Ground-base skidding,Skidding direction}, title_fa = {ارزیابی کارایی سرعت اسکیدر چنگک دار HSM 904 در شیب های طولی مختلف مسیر چوبکشی}, abstract_fa = {در طی عملیات چوبکشی در جنگل به وسیله ماشین های چوبکشی زمینی عواملی چون شیب، حجم بار و تعداد بینه در هر نوبت و جهت چوبکشی روی زمان چوبکشی تاثیر گذار هستند. در این پژوهش عملکرد اسکیدر HSM904 در سیستم چوبکشی گردبینه کوتاه در سری 2 (ارزفون)، جنگل های چوب و کاغذ مازندران در شیب های مختلف مورد مطالعه قرار گرفت. بدین منظور قبل از انجام عملیات چوبکشی, 6 کلاسه شیب (10-28 درصد و فواصل 3 درصد) بر روی یک مسیر چوبکشی با جهت چوبکشی رو بالا به طول 700 متر انتخاب شد. حین انجام عملیات چوبکشی علاوه بر متغیر شیب طولی مسیر, تأثیر دو متغیر حجم بار در هر نوبت در دو طبقه (کمتر از 5/3 و بیشتر از 5/3 مترمکعب) و تعداد بینه در هر نوبت (کمتر از 2 و بیشتر از 2 اصله) نیز مورد مطالعه قرار گرفت. نتایج حاصل از زمان سنجی، بر اساس 156 نوبت کاری (26 نوبت در هر کلاسه شیب) نشان دادکه در حرکت بدون بار کلاسه شیب (13– 16درصد) تاثیر معنی داری را بر روی سرعت ماشین داشته است و بیشترین سرعت در این کلاسه شیب مشاهده گردید. همچنین حداقل سرعت ماشین در کلاسه شیب (22-25 درصد) و بعد از آن ثبت گردید. در حرکت با بار، با افزایش شیب طولی مسیر، سرعت اسکیدر کاهش یافته و حداقل سرعت در شیب (19-28 درصد) ثبت گردید. نتایج مطالعه حاضر همچنین نشان داد که عامل حجم بار بر روی عملکرد ماشین تاثیر معنی داری دارد (05/0P}, keywords_fa = {جهت چوبکشی,روش بهره برداری گردبینه کوتاه,زمان سنجی پیوسته,سری ارزفون,عملیات چوبکشی زمینی}, url = {https://jwfst.gau.ac.ir/article_2822.html}, eprint = {https://jwfst.gau.ac.ir/article_2822_23d119dc420c9576ec9b5879868b8ca6.pdf} } @article { author = {jafari, javad and Tabary kuchaksaraei, Masoud and hoseini, seyed mohsen and kooch, yahya}, title = {Effect of Physiographical Factors on Plant Species Diversity in Forests of Western Bodjnourd (North of Iran)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {224-238}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {This investigation has been conducted to determining plant species diversity in relationship to the physiographical factors in western Bodjnourd forests (North of Iran). To cope with the aim of study, 220 ha of these forests (called Joezak-Darkesh forest) at 1400-2000 m a.s.l. with different geographical aspects and slope steeps of 0-80 percent were identified. Number of 55 sample plots of 20 × 20 m as random-systematic distribution was selected to determination of the trees and shrubs. In addition, within each plot 9 micro-plots 2 × 2 m were confined to recognition of ground non-woody flora. The highest value of species similarity was obtained between two low height classes (< 1800 m). Indices of diversity, richness and evenness did not differ with changing slope. Maximum and minimum value of Simpson’s diversity index and Margalef’s species richness were found in the 1400-1600 and 1800-2000, respectively. The highest Simpson’s diversity was observed for the warmer aspects (eastern) and the lowest for the cooler aspects (northern). It may be deduced that the present temperature of the landform could be affecting factor on plant diversity and richness of forest stands of this region. In the site study, presence of some vegetation elements associated with Hyrcanian vegetation appears a vegetation figure that it can be investigated more completely by botanists and phytogeography researchers.}, keywords = {Keywords: Hyrcanian vegetation,Plant diversity index,Topography factors,Species similarity}, title_fa = {اثر عوامل فیزیوگرافی روی تنوع گونه‌های گیاهی جنگل‌های غرب بجنورد}, abstract_fa = {این تحقیق به منظور تعیین اثر فاکتورهای فیزیوگرافی روی تنوع ‌گونه‌های گیاهی جنگل‌های غرب بجنورد انجام شد. در این ارتباط، مساحت 220 هکتار از این جنگل‌ها (موسوم به جنگل جوزک- درکش) واقع در ارتفاعات 1400 تا 2000 متر از سطح دریا با جهات مختلف جغرافیایی و شیب‌های بین 0 تا 80 درصد انتخاب شد. به شکل تصادفی- سیستماتیک تعداد 55 قطعه نمونه 400 متر‌مربعی برای بررسی گونه‌های درختی و درختچه‌ای، و در داخل هر قطعه نمونه، 9 قطعه نمونه کوچک 2 × 2 متری برای بررسی گونه‌های علفی مد‌نظر قرار گرفت. بیشترین تشابه گونه‌ای بین دو طبقه ارتفاعی 1600-1400 و 1800-1600 متر مشاهده شد. هیچ یک از شاخص‌های تنوع سیمپسون، غنای مارگالف و یکنواختی هیل با افزایش شیب تغییری نکردند. بیشترین و کمترین مقدار شاخص‌های تنوع سیمپسون و غنای مارگالف به ترتیب، به طبقه ارتفاعی 1600-1400 متر و 2000-1800 متر تعلق داشت. بیشترین تنوع گونه‌ای سیمپسون در دامنه شرقی و کمترین آن در دامنه‌ شمالی مشاهده شد که ممکن است به علت اختلاف دمای جهت‌های دامنه نام‌برده باشد که عامل تاثیرگذار بر تنوع و غنای گونه‌ای توده‌های جنگلی این منطقه است. حضور برخی عناصر رویشی در کنار عناصر هیرکانی، سیمایی از پوشش گیاهی را در منطقه ظاهر می‌سازد که می‌تواند قابل مطالعه عمیق‌تر توسط گیاه‌شناسان و متخصصان جغرافیای گیاهی باشد.}, keywords_fa = {کلمات کلیدی: رویش‌های هیرکانی,شاخص تنوع گونه گیاهی,تشابه گونه‌ای,عوامل توپوگرافی}, url = {https://jwfst.gau.ac.ir/article_2819.html}, eprint = {https://jwfst.gau.ac.ir/article_2819_035d5658c9217d0a7e134ba1d9bdf22a.pdf} } @article { author = {mir, samane and farrokhpayam, saeedreza and ناظریان, مرتضی}, title = {Lightweight Particleboard Using Expanded Polystyrene}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {4}, pages = {239-254}, year = {2016}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this study the possibility of using expanded polystyrene (EPS) was studied to reduce the density of the final board. This research was concentrated on weight loss particleboard in significant quantities, while maintaining the internal bond strength. For this purpose, with using different values of the expanded polystyrene, along with the change of press temperature, the composites were made with a nominal thickness of 25 mm and 30% less weight, characterized by industrial production. The results that some of them are as follows were raised from analysis of the information gathered by the physical and mechanical tests (internal adhesion, modulus of rapture, modulus of elasticity, thickness swelling, water absorption and Screw-holding capacity) which were conducted in accordance with EN. Generally, removing a partial of wood particles from core layer and replacement of EPS to make available reducing weight with keeping physical characteristics was successful. The expanded polystyrene with the considering applications for this product in the first stage showed the acceptable resistance. The result of internal bonding test showed that increasing the content of foam polystyrene granules and press temperature has a negative impact on the property. The results clearly showed increasing of press temperature and EPS content caused modulus of rapture and modulus of elasticity was improved. No significant difference was found on the effect of press temperature on screw withdrawal strength while the highest of this strength was found on the panels made with 1 percent EPS contain. Particleboard made with 5 % Expanded polystyrene showed most favorable percent thickness swelling and water absorption.}, keywords = {Lightweight Particleboard,Expanded Polystyrene,Pressing Temperature,Physical and mechanical properties}, title_fa = {سبک سازی تخته خرده چوب با استفاده از پلی استایرن منبسط شده}, abstract_fa = {در این مطالعه امکان به‌کارگیری پلیمر پلی استایرن منبسط شده (EPS) به منظور کاهش دانسیته نهایی تخته بررسی شد. این کار پژوهشی بر روی کاهش وزن تخته خرده چوب به مقدار قابل توجه، با حفظ مقاومت چسبندگی داخلی متمرکز شده است. بدین منظور با استفاده از مقادیر متفاوت پلی استایرن انبساطی در بافت تخته، همزمان با تغییر سطوح دمای پرس، فرآورده‌ای با ضخامت اسمی 25 میلی‌متر با 30 درصد وزن کمتر و با مشخصه‌های صنعتی تولید گردید. تجزیه و تحلیل اطلاعات گردآوری شده از آزمون‌های مکانیکی و فیزیکی نمونه‌ها (چسبندگی داخلی، مقاومت خمشی، مدول الاستیسیته، واکشیدگی ضخامت، جذب آب و تحمل نگهداری پیچ) که مطابق با استاندارد EN انجام شد، منتج به نتایجی که برخی از آن‌ها در ادامه می‌آید شد. بطور کلی ثابت شد حذف خرده چوب از لایه میانی و جایگزینی پلی استایرن در این لایه که باعث دستیابی به هدف اولیه یعنی کاهش وزن توام با حفظ ظاهر فیزیکی تخته گردید، موفقیت آمیز بود. همچنین پلی استایرن منبسط شده با توجه به کاربردی که برای این فرآورده در مرحله اول تعریف شده است مقاومت‌هایی در حد قابل قبول ارائه می‌دهد. نتایج حاصل از آزمون چسبندگی داخلی نشان داد که افزایش میزان گرانول‌های پلی استایرن فوم شده و دمای پرس تأثیر منفی بر این ویژگی داشته است. اندازه گیری مقاومت خمشی و مدول الاستیسیته و نتایج حاصل از تحلیل داده‌ها نشان داد که با افزایش دما و درصد پلی استایرن مقاومت خمشی و مدول الاستیسیته بهبود می‌یابند. بیشترین مقاومت نگهداری پیچ به تخته‌های ساخته شده با 1 درصد پلی استایرن اختصاص داشت و تغییرات دما اثر معنی‌داری بر این مقاومت نداشت. تخته‌های ساخته شده با 5 درصد پلی استایرن منبسط شده مطلوب‌ترین میزان واکشیدگی ضخامت و جذب آب را از خود نشان دادند.}, keywords_fa = {تخته خرده چوب سبک,پلی استایرن منبسط شده,دمای پرس,خواص فیزیکی و مکانیکی}, url = {https://jwfst.gau.ac.ir/article_2820.html}, eprint = {https://jwfst.gau.ac.ir/article_2820_281900f5a5941f4dacacd5464ad0496c.pdf} }