@article { author = {}, title = {Comparing Investigation on Landsat-ETM+ and IRS-P6-LISS IV Data for Canopy Cover Mapping of Zagros Forests (Case Study, Javanroud Forests)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {1-20}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In order to evaluate capability of the Landsat-ETM and IRS-P6-LISS IV images for canopy cover mapping a case study was done on the forests of Javanroud in Kermanshah province. After evaluation of the geometric and radiometric quality of the data, the ETM+ images, the ETM+ images were geometrically corrected with GCPs and the images were registered with RMSE error 0.46 and 0.48 pixels, for X and Y, respectively. The COST method was used to atmospheric correction. To reduce the effect of soil reflectance, suitable vegetation indices were prepared using soil line parameters. A ground truth map was generated through random systematic sampling method with sample size of 60×60m2. In each plot, the canopy of trees was measured in two directions and percentage of canopy cover was computed in hectare. The plots were classified to four classes (very thin, thin, semi-dense and dense) based on canopy cover. 25% of sample plots from each class was selected as training area and the best spectral bands were selected using divergence separability index between classes. Regarding to area of canopy cover computing and in order to pixel size equalization of LISS-IV and ETM+ images, 6×6 pixel size of LISS-IV images were merged and their average value was used as a final value of merged pixel. Supervised classification was accomplished on the best and main bands. The accuracy assessment of generated map was evaluated using 75% of sample plots. The results showed that using the best selected LISS-IV bands could better classify 4 classes than other images by maximum likelihood algorithm with 64.54% overall accuracy and 0.43 kappa coefficient. In order to develop the results, the very thin class with thin class and semi-dense with dense classes were merged and a new classification was repeated. The minimum distance to mean classifier algorithm using the best selected LISS-IV bands showed the highest overall accuracy and kappa coefficient equal to 79% and 0.58, respectively. It is concluded that in such sparse forests, low canopy area of forest species as well as the soil reflectance as background leads to undesirable results.}, keywords = {}, title_fa = {مقایسه قابلیت داده‎های لندست 7 و IRS-P6 در تهیه نقشه تراکم تاج پوشش جنگل‌های زاگرس (مطالعه موردی جنگل‌های شهرستان جوانرود)}, abstract_fa = {پژوهش حاضر با هدف بررسی قابلیت داده‌های سنجنده ETM+ ماهواره لندست 7 و LISS-IV ماهوارهIRS-P6 در تهیه نقشه تراکم تاج پوشش جنگل در جنگل‌های شهرستان جوانرود استان کرمانشاه صورت گرفت. پس از بررسی کیفیت هندسی و رادیومتری داده‎ها، تصاویر سنجنده ETM+ مورد تصحیح هندسی قرار گرفت. تصحیح اتمسفری به روش مدل COST انجام شد. با به‌دست آوردن رابطه خط خاک و تعیین ضرایب آن، شاخص‌های گیاهی مناسب برای کاهش اثر بازتاب خاک ایجاد شدند. واقعیت زمینی نمونه‎ای از طریق روش تصادفی سیستماتیک و با شبکه‎ای به ابعاد 300×300 متر و با سطح قطعات نمونه 60×60 مترمربعی تهیه گردید. در هر قطعه نمونه میزان تاج پوشش درختان برداشت و درصد تاج پوشش کل درختان در هر قطعه نمونه و در هر هکتار محاسبه و تعیین شد. با انتخاب 25 درصد از قطعات نمونه از هر طبقه تراکم جنگل به‌عنوان نمونه تعلیمی، نشانه‎های طیفی طبقات استخراج و ترکیبات باندی مناسب با توجه به معیار واگرایی انتخاب شدند. به‌منظور برابرسازی ابعاد پیکسل‌های سنجنده LISS-IV با سطح محاسباتی تاج پوشش و سنجنده ETM+، ابعاد 6×6 پیکسل‌های سنجنده LISS-IV در هم ادغام و میانگین ارزش‎های آن‌ها به‌عنوان ارزش نهایی پیکسل ادغام شده در نظر گرفته شد. طبقه‎بندی داده‎ها به روش نظارت شده و با 4 طبقه تراکمی خیلی تنک، تنک، نیمه انبوه و انبوه صورت گرفت. نقشه واقعیت زمینی با 75 درصد قطعات نمونه باقی‌مانده از طبقاتی تراکم تاج پوشش تهیه و نتایج طبقه‎بندی با نقشه یادشده مورد ارزیابی قرار گرفتند. نتایج ارزیابی صحت نشان داد که بالاترین صحت کلی و ضریب کاپا در طبقه‌بندی 4 طبقه‌ای به‌ترتیب معادل 54/64 درصد و 43/0 با ترکیب 6 باندی منتخب و طبقه‌بندی‌کننده حداکثر احتمال با استفاده از داده‎های LISS-IV بوده است. با ادغام طبقات تراکمی خیلی تنک با تنک و نیمه انبوه با انبوه و انجام مجدد طبقه‌بندی، بالاترین صحت کلی و ضریب کاپا به‌ترتیب معادل 79 درصد و 58/0 با ترکیب 6 باندی منتخب و طبقه‌بندی‌کننده حداقل فاصله از میانگین با استفاده از داده‎های LISS-IV به‌دست آمد. براساس نتایج به‌دست آمده، در جنگل‌های مورد بررسی به‌عنوان بخشی از جنگل‌های زاگرس، به‌دلیل پایین بودن مقدار تاج پوشش جنگلی، بازتاب خاک و پوشش گیاهی کف جنگل، تفکیک طبقات تراکم تاج پوشش درختان به سختی صورت می‌گیرد و این امر مانع از دست‌یابی به نتایج بهتر می‎گردد.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_203.html}, eprint = {https://jwfst.gau.ac.ir/article_203_45885f52a8d35ccde8320f1075e33f44.pdf} } @article { author = {}, title = {Effect of Forest Road Construction on Forest Villages Development (Case Study; Series 2, Section 6, Neka-Zalem rood)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {19-39}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In the past, forest road network designing was mainly done for its main goals-management and exploitation. This study was performed to pay attention for multilateral goals of forest roads, especially its role in forest villages’ development, in Estakhr-Posht of Neka (6 villages) in series 2, section 6 of Neka-Zalem rood forest management plan. At first, constructed forest roads and suggested roads were calculated in 3 decades (1986, 1996, and 2006). Then, development situation and the benefits of studied villages services from implementation of the plan at each decades was determined by using statistical sources and related information to population and housing census, agriculture and complementally questionnaire for each one of villages (general, social, economic characteristics, services, facilities and available possibilities) on the basis of pre-eminent related to road construction. With doing attention to villages’ access to means of communication type of roads the advantage of profit rate of forest road was calculated. Data was processed with Excel software and then, the relation between accessing of forest roads donations and village development was analyzed by Pearson correlation test. The Result showed that Calculated correlation rate was equal to r=0.866 that alluding to direct and meaningful relation was between access to forest roads and village development. Finally this study indicated that the villages by accessing to forest roads for more years and means of communication in long time could be enjoyed possibilities, services and had best situation in respect of rural development.}, keywords = {}, title_fa = {اثر احداث جاده جنگلی بر توسعه روستاهای جنگلی (مطالعه موردی: سری 2 بخش 6 طرح جنگل‌داری نکا- ظالم‌رود)}, abstract_fa = {در گذشته طراحی شبکه جاده‌های جنگلی بیش‌تر در راستای تحقق اهداف اصلی آن یعنی مدیریت و بهره‌برداری از جنگل بوده است. این بررسی به‌منظور توجه به اهداف همه‌جانبه راه‌های جنگلی، به‌خصوص نقش آن در توسعه‌یافتگی روستاهای واقع در جنگل، استخر پشت نکا (دارای 6 روستا) انجام گرفت. ابتدا با استفاده از اطلاعات و برنامه طراحی و ساخت راه‌های جنگلی در منطقه وصف شده در سه دهه 1365، 1375 و 1385 مراحل ساخت راه‌های جنگلی و برنامه جاده‌های پیشنهادی، استخراج گردید. سپس با استفاده از منابع آماری و اطلاعات مربوط به سرشماری عمومی نفوس و مسکن، کشاورزی و پرسش‌نامه تکمیل شده برای هر یک از روستاها (مشخصات عمومی، اجتماعی، اقتصادی، تأسیسات، تسهیلات و امکانات موجود در آبادی‌ها) براساس شاخص‌های مرتبط با ساخت جاده، وضعیت توسعه‌یافتگی و بهره‌مندی از خدمات روستاهای مورد مطالعه به تفکیک هر دهه از اجرای طرح مشخص شد. با توجه به دسترسی روستاها به نوع راه‌های ارتباطی، امتیاز میزان بهره‌مندی از راه جنگلی محاسبه گردید. داده‌ها در نرم‌افزار Excel پردازش شد و سپس با استفاده از آزمون همبستگی پیرسون، رابطه بین برخورداری از فواید جاده‌های جنگلی و توسعه‌یافتگی روستاها محاسبه گردید، میزان همبستگی محاسبه شده برابر با 866/0=r به‌دست آمد که بیانگر ارتباط مستقیم و معنی‌دار میان دسترسی به راه‌های جنگلی و توسعه‌یافتگی روستا است. در نهایت نتایج این مطالعه نشان داد، روستاهایی که مدت زمان بیش‌تری به جاده‌های جنگلی و راه‌های ارتباطی دسترسی داشته‌اند از امکانات، خدمات و شرایط بهتری از لحاظ توسعه‌یافتگی بهره‌مند شدند.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_204.html}, eprint = {https://jwfst.gau.ac.ir/article_204_2f06d8332a8fb50bd1189436c1f2dd2c.pdf} } @article { author = {}, title = {The Effect of Growth Stresses on the Anatomical and Physical Properties of Fagus orientalis L.}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {37-55}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Growth stresses develop in trees' trunks during formation and maturation of their growth rings. The asymmetric of growth stress field causes formation of abnormal wood called "reaction wood". This study has been conducted to characterize the effect of growth stresses on anatomical and physical properties of Fagus orientalis. Longitudinal growth stress was measured at 8 equidistant points on circumference, at breast height of 19 standing Beech trees in parcels 117 and 223/220 at Kheyroudkenar Research Forest. Using displacement gauge, longitudinal Point with greatest stress history on each sample tree was marked, and then trees were cut down to collect test materials for anatomical and physical properties. On cross-section of each sample bolt segment of harvested trees, area with greatest stress and its opposite were identified to cut out specimens. Results of investigations have shown that in the area with greatest values of longitudinal stress, tension wood has formed. In this area comparing with opposite wood of cross-section, number of vessels, diameter of vessels' lumen and typical fiber diameter were lower, but length and wall thickness of fibers and average percent of fiber content, shrinkage and swelling rates were higher. There were no significance statistical difference between moisture content and basic specific gravity in wood of both areas.}, keywords = {}, title_fa = {اثر تنش‌های رشد بر ویژگی‌های آناتومی و فیزیکی راش ایران (Fagus orientalis L.)}, abstract_fa = {تنش‌های رشد طی تشکیل و بالغ شدن دوایر رویش، در درخت گسترش می‌یابند. نبود تقارن بین مقدار تنش‌های رشد در درختان ایستاده، سبب ایجاد چوبی غیرطبیعی به‌نام چوب واکنشی، می‌شود. مطالعه حاضر به‌منظور بررسی تأثیر تنش‌های رشد بر ویژگی‌های آناتومی و فیزیکی گونه راش (Fagus orientalis L.)، انجام شده است. تنش‌ طولی رشد در ارتفاع برابر سینه در 8 نقطه هم‌فاصله از پیرامون تنه 19 درخت سرپای راش از پارسل‌های 117 و 220/223، جنگل آموزشی خیرود‌کنار‌، به‌وسیله‌ تغییر مکان‌سنج اندازه‌گیری شده و نقاط دارای بیش‌ترین تنش مشخص گردید. سپس به‌منظور بررسی‌های فیزیکی و آناتومیکی، این درختان قطع شدند. در هر درخت قطع شده، از نقاط دارای بیش‌ترین تنش رشد و سمت مقابل آن‌، نمونه‌هایی برای مطالعات فیزیکی و آناتومی، تهیه گردید. نتایج بررسی وضعیت آوندها و الیاف نشان دادند که در نقاط دارای تنش طولی زیاد، چوب واکنشی ایجاد شده است و در آن‌ها نسبت به ناحیه مقابل در مقطع عرضی تنه، تراکم آوندها و قطر کلی فیبرها و قطر حفره آوندها کم‌تر، اما طول فیبرها و ضخامت دیواره آن‌ها بیش‌تر است. بازده الیاف، واکشیدگی و هم‌کشیدگی نقاط پرتنش در مقایسه با نقاط مقابل، بیش‌تر می‌باشد. در مقدار درصد رطوبت و جرم ویژه پایه نقاط پرتنش در مقایسه با نقاط مقابل، تفاوت آماری معنی‌دار مشاهده نشد.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_205.html}, eprint = {https://jwfst.gau.ac.ir/article_205_9eac25b7c5c3bbb70d26b70f8ff5e70c.pdf} } @article { author = {}, title = {Comparison of Peroxidase Seasonal Alteration Among Populus deltoides Clones}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {55-71}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Plantation of fast-growing species such as Poplar is one of the important methods for wood production in the countries with low natural forest areas. Physiological differences of Populus deltoides clones planted through three decades in Shast Kalate research forest are unknown. Peroxidase enzyme in this research was used for clone separation as a biochemical marker that is sensitive to environmental alteration especially temperature and its direct participation in lignification process. Sampling was done from one year old seedlings of five clones and quantitative and qualitative activities of peroxidase during five months (September through May) were measured using Worthington and PAGE methods, respectively. The results showed that peroxidase quantitative activity and isoenzyme pattern of clones were different among the months which indicated the role of this enzyme in cold hardiness and lignification of the clones.}, keywords = {}, title_fa = {مقایسه تغییرات فصلی آنزیم پراکسیداز کلون‌های مختلف صنوبر دلتوییدس}, abstract_fa = {زراعت گونه‌های تند رشد مانند صنوبر یکی از راه‌کارهای مهم کشورهای با مساحت کم جنگل‌های طبیعی جهت تولید چوب است. تفاوت‌های فیزیولوژیکی کلون‌های مختلف صنوبر دلتوییدس که در طول سه دهه در جنگل تحقیقاتی شصت‌کلاته گرگان کشت گردیده‌اند برای ما ناشناخته است. در این پژوهش آنزیم پراکسیداز به‌عنوان یک نشانگر بیوشیمیایی حساس به تغییرات محیطی به‌ویژه دما و دخالت مستقیم آن در فرآیند لیگنین‌سازی جهت تفکیک کلون‌ها استفاده گردید. به این منظور از نهال‌های یک‌ساله 5 کلون این گونه نمونه‏گیری و فعالیت کمی و کیفی پراکسیداز به‌ترتیب به روش ورتینگتون1 و PAGE2 در طول 5 ماه (شهریور تا اردیبهشت) مطالعه گردید. نتایج به‌خوبی نشان داد که میزان کمی و الگوهای ایزوآنزیمی پراکسیداز کلون‌ها در ماه‌های مختلف با هم فرق می‌کنند که نشان‌دهنده نقش این آنزیم در مقاومت به سرما و لیگنین‌سازی است.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_206.html}, eprint = {https://jwfst.gau.ac.ir/article_206_6292a051bf1469b53f014ea9d933d4f2.pdf} } @article { author = {}, title = {The Effect of Different Conditions of Enzymatic Deinking on Optical Properties of ONP Deinked Pulp with Cellulase}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {71-86}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Deinkability of old newspaper was investigated using cellulase at different concentrations and treatment times. The results of optical properties of the made papers indicated that by increasing the enzyme concentration to 0.05 percent the brightness was increased to 47.5% ISO and yellowness decreased to 11.03% ISO. While at higher charges than 0.05 percent, brightness value the was decreased and yellowness increased. Opacity of paper was improved to 99.3% ISO by increasing the enzyme charge to 0.1% but it was reduced at higher levels than 0.1%. It was observed that enhancing of treatment time to 15 minutes and also using one-stage washing resulted in the highest brightness of 47.5% ISO, the lowest yellowness of 11.03% ISO and the opacity of 97.4% ISO. Maximum opacity was observed at treatment time of 10 minutes. With regard to the results from paper provided with enzymatic deinking of old newspaper, we could produce the papers with desirable brightness and low yellowness using optimum charge of 0.05% cellulase and treatment time of 15 minutes along with one-stage washing. We could also obtain higher opacity values using 0.1 percent enzyme or 10 minutes treatment time.}, keywords = {}, title_fa = {تأثیر شرایط مختلف مرکب‌زدایی آنزیمی با سلولاز بر ویژگی‌های نوری خمیرکاغذ روزنامه باطله}, abstract_fa = {در این پژوهش قابلیت مرکب‌زدایی کاغذهای روزنامه باطله با استفاده از آنزیم سلولاز در غلظت‌ها و زمان‌های مختلف تیمار آنزیمی بررسی شد. نتایج به‌دست آمده از اندازه‌گیری خواص نوری کاغذهای ساخته شده نشان داد که با افزایش غلظت آنزیم تا 05/0 درصد، درجه روشنی کاغذها به 5/47 درصد ایزو رسیده و درجه زردی آن‌ها تا 03/11 درصد ایزو کاهش یافت. در حالی‌که درجه روشنی در غلظت‌های بیش‌تر کاهش و درجه زردی افزایش یافت. درجه ماتی کاغذها با افزایش غلظت آنزیم تا 1/0 درصد به 3/99 درصد ایزو بهبود یافت و در غلظت بیش‌تر روند کاهشی داشته است. با افزودن زمان تیمار آنزیمی تا 15 دقیقه و استفاده از یک مرحله شستشو، حداکثر درجه روشنی 5/47 درصد و حداقل درجه زردی 03/11 درصد و درجه ماتی 4/97 درصد ایزو مشاهده شده است. در زمان تیمار آنزیمی 10 دقیقه، درجه ماتی بیش‌تری مشاهده گردید. با توجه به نتایج به‌دست آمده از خواص نوری کاغذهای ساخته شده از مرکب‌زدایی کاغذهای روزنامه باطله می‌توان گفت که با استفاده از آنزیم سلولاز در غلظت بهینه 05/0 درصد و زمان بهینه 15 دقیقه همراه با یک مرحله شستشو می‌توان کاغذهای با درجه روشنی مطلوب و درجه زردی کم‌تر تولید کرد. این در حالی است که با استفاده از غلظت 1/0 درصد و یا زمان تیمار آنزیمی 10 دقیقه، می‌توان به درجات ماتی بیش‌تری رسید.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_207.html}, eprint = {https://jwfst.gau.ac.ir/article_207_2f282a19cba98ab8280f4189e2c76606.pdf} } @article { author = {}, title = {Effect of Beech Red Heartwood (Fagus orientalis L.) on the Physical Properties (Moisture Content and Specific Gravity) and the Drying Behavior of the Species}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {85-99}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this research, the influence of red heartwood formation in Iranian Beech (Fagus orientalis L.) on its drying behavior was studied. Radial variation (from pith to bark) in specific gravity, green moisture content, drying rate, transverse shrinkage and casehardening in a Beech log containing red heartwood was investigated. All samples were dried in an experimental kiln under a constant temperature of 60 oC and relative humidity of 40% to the final moisture content of about 8%. The results showed that the wood containing red heartwood had greater specific gravity and lower green moisture content than normal wood. In addition, it was revealed that the red heartwood formation in Beech decreased the drying rate and increased shrinkage and casehardening. The microscopic studies indicated that the tylose presents in the vessel cavities of red heartwood Beech. Thus, the different drying behavior of Beech red heartwood can be attributed to the tylose in the vessel cavities.}, keywords = {}, title_fa = {بررسی تأثیر دل قرمزی راش ایران (Fagus orientalis L.) بر خواص فیزیکی (رطوبت و جرم ویژه) و رفتار خشک شدن آن}, abstract_fa = {در این پژوهش، تأثیر تشکیل دل قرمزی در گونه راش ایران (.L orientalis Fagus) بر رفتار خشک شدن این گونه بررسی شد. تغییرات شعاعی (از مغز به پوست) در جرم ویژه بحرانی، رطوبت سبز، نرخ خشک شدن، هم‌کشیدگی عرضی و شدت تنش‌های باقی‌مانده (برون سختی) در گرده بینه راش دارای دل قرمزی مطالعه گردید. 5 نمونه در یک کوره آزمایشگاهی در دمای ثابت 60 درجه سانتی‌گراد و رطوبت نسبی 40 درصد تا رسیدن به رطوبت نهایی حدود 8 درصد خشک شدند. نتایج نشان داد که چوب حاوی دل قرمزی در مقایسه با چوب معمولی جرم ویژه بیشتر و رطوبت سبز کم‌تری دارد. همچنین مشخص شد که تشکیل دل قرمزی در راش منجر به کاهش نرخ خشک شدن چوب و هم‌کشیدگی عرضی و برون سختی بیشتر می‌گردد. مطالعات میکروسکوپی نشان داد که تیل به وفور در حفره‌های آوندی چوب دل قرمز راش تشکیل می‌شود. بنابراین، رفتار متفاوت چوب دل قرمز راش هنگام خشک شدن را می‌توان به حضور تیل در حفره‌های آوندی نسبت داد.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_208.html}, eprint = {https://jwfst.gau.ac.ir/article_208_852fcc2c3fe870427ad6911fdcb97eed.pdf} } @article { author = {}, title = {Comparison among Different Clones of Populus nigra in Aspect of Cold Resistance}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {99-112}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Increasing of wood demand is currently one of the most important problems in our society. Different clones of Populus nigra from salicacea as a native fast-growing species have a good potential for planting in wide scale. But because of the ecological differences in the field, especially. Temperature alterations, segregation of the cold resistant clones in relation to in seedling stage establishment is very important. Peroxidase enzyme as one of the most sensitive physiological factors to environmental stresses, especially low temperature was used to compare the ability of cold resistance of five clones of this species. Quantitative and qualitative activities of this biochemical marker (POD) were studied during five months from September till May. The result indicated that P. nigra 62.231 and 64.13 clones had the best ability of early autumn cold resistance and P. nigra 56.52 clone had the best ability of late spring cold resistance. Also, P. nigra 62.171 and 64.13 clones the best winter cold resistance.}, keywords = {}, title_fa = {مقایسه کلن‌های مختلف گونه شالک (Populus nigra) از نظر مقاومت به سرما}, abstract_fa = {یکی از مشکلات عمده جامعه امروزی ما نیاز روزافزون به چوب می‌باشد. گونه شالک (L. Populus nigra) از خانواده بید یکی از گونه‌های تند رشد بومی کشورمان است که کلن‌های مختلف آن، توانایی گسترش کشت در قالب زراعت چوب را به‌طور وسیع دارند. اما از آنجا که عرصه‌های موردنظر دارای تفاوت‌های اکولوژی متفاوتی به‌ویژه از نظر تغییرات دمایی هستند، تفکیک کلن‌های مقاوم به سرما به‌خصوص در مراحل استقرار نهالی بسیار مهم است. آنزیم پراکسیداز در این پژوهش به‌عنوان یکی از حساس‌ترین عوامل فیزیولوژی گیاهان تحت تنش‌های محیطی به‌ویژه سرما جهت مقایسه توانایی مقاومت به سرمای پنج کلن این گونه به‌کار گرفته شده است. فعالیت کمی و کیفی نشانگر بیوشیمیایی پراکسیداز در طول 5 ماه از شهریورماه تا اردیبهشت‌ماه مطالعه گردید. نتایج نشان داد که کلن‌های 231/62 و 13/64 بالاترین توانایی مقاومت به سرمای زودرس پاییزه و کلن 52/56 بالاترین توانایی مقاومت به سرمای دیررس بهاره را داشته‌اند. همچنین کلن‌های 171/62 و 13/64 بالاترین توانایی مقاومت به سرمای زمستانه را داشتند.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_209.html}, eprint = {https://jwfst.gau.ac.ir/article_209_06cc8dd3667d66690c1427fe78497aff.pdf} } @article { author = {}, title = {Investigation of Microscopic Structure and Chemical Changes in Beech Wood During Weathering Process}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {112-125}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this study Beech wood (Fagus orientalis Lipsky) samples with dimentions of 150755 mm were prepared and subjected to a variety of artificial weathering conditions in an Atlas Xenon Test Beta LM Weatherometer to UV radiation (300 nm) and visible light (750 nm) and water spray in different times (50, 150 and 300 h). Then wood surface was analyzed for chemical and structural changes using Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM), respectively. Results showed that weathering process affected the functional groups on the wood surface. Full weathering (light and water) damaged the surface polymer structure and caused chemical and physical changes in wood. The greatest changes occurred in the functional groups and aromatic structure of lignin. With increasing of weathering time, the absorption intensity of c=o loonds increased at 1730-1740 cm-1 and aromatic skeletal vibration in intensity 1514 cm-1 decreased. By the effect of UV radiation, choromophoric groups were produced in lignin. Photochemical cleavage of C-C bonds adjacent to carbonyl groups made the chemical compounds smaller and water-soluble. The SEM results showed that the surface of wood exposed to weathering undergoes distinct physical changes and the surface degradation appears to be directly proportional to the time of exposure to the weathering conditions. However, trace changes were observed in samples weathered for 50h.}, keywords = {}, title_fa = {بررسی تغییرات شیمیایی و‌ ساختار میکروسکوپی چوب راش طی فرآیند‌ هوازدگی}, abstract_fa = {در این مطالعه نمونه‌هایی از چوب راش (Lipsky Fagus orientals) به ابعاد 575150 میلی‌متر تهیه و در زمان‌های مختلف (50، 150 و 300 ساعت) در دستگاه هوازدگی مصنوعی Atlas Xenon Test Beta LM تحت تابش اشعه UV (300 نانومتر) و اشعه مرئی (750 نانومتر) و بارش (اسپری آب) قرار ‌داده شد. سپس تغییرات شیمیایی و میکروسکوپی ایجاد شده در سطح چوب، با استفاده از طیف‌سنجی FTIR و میکروسکوپ الکترونی (SEM) مورد مطالعه قرار ‌گرفت. نتایج نشان دادند که هوازدگی بر گروه‌های عاملی سطح چوب تأثیر ‌گذاشت و به ساختار پلیمری آن صدماتی وارد کرد و باعث ایجاد تغییرات شیمیایی و فیزیکی در چوب گردید. بیشترین تغییرات در گروه‌های عاملی و ساختار آروماتیک لیگنین روی داد. با افزایش مدت زمان قرار گرفتن در معرض هوازدگی، شدت جذب کششی C=O در حدود cm-1 1740-1730 افزایش و جذب در cm-1 ‌1514 که مربوط به گروه‌های آروماتیکی است، کاهش یافت. در اثر تابش اشعه UV، گروه‌های کروموفوری (رنگی) در لیگنین ایجاد ‌شد. گسست‌های فتو‌شیمیایی پیوندهای C-C مجاور با گروه‌های کربونیل در اثر هوازدگی باعث کوچک شدن و محلول شدن در آب‌ ترکیبات شیمیایی گردید و آن‌ها را قابل آب‌شویی نمود. تصاویر ‌SEM نشان دادند که ظهور تخریب‌های سطحی متناسب با زمان قرار‌ گرفتن در شرایط هوازدگی است و میزان تغییرات در نمونه‌هایی که 50 ساعت در معرض هوازدگی قرار گرفته‌اند بسیار ناچیز می‌باشد.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_210.html}, eprint = {https://jwfst.gau.ac.ir/article_210_3c71ca3252cc4505d731ceb9d964a646.pdf} } @article { author = {}, title = {Dimensional Stability and Mechanical Properties of Particleboard Made from Acetylated Bagasse}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {125-136}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {The purpose of this study was to evaluate the dimensional stability and mechanical properties of three-layer particleboard produced from linear chain carboxylic acid anhydride modified bagasse particles. Modification was performed via esterification of bagasse using acetic anhydride without using any catalyst and solvent at 120 oC for 240 min at lab scale. Bagasse with two particle sizes including fine (0.2-0.4 mm) and coarse (0.8-1.2 mm) were modified. Different weight percent gains (WPGs) were obtained with different sizes and reagents. Acetylated and unmodified bagasse particles were pressed into three-layer particleboards using phenol formaldehyde (resole type). The physical and mechanical properties of the boards were tested. The particleboards made from esterified bagasse particles were more dimensionally stable (about 87%) than control boards made from untreated bagasse. But the mechanical and physical properties of the modified boards were lower than control board.}, keywords = {}, title_fa = {بررسی ثبات ابعادی و خواص مکانیکی تخته حاصل از باگاس استیله شده}, abstract_fa = {هدف از این مطالعه بررسی پایداری ابعادی و خواص مکانیکی تخته‌خرده لایه‌ای ساخته شده از ذرات باگاس است. ذرات باگاس با 2 اندازه ریز (4/0-2/0 میلی‌متر) و درشت (2/1-8/0 میلی‌متر) تهیه گردید. و سپس به‌وسیله انیدریک اسید کربوکسیلیک خطی اصلاح شد. اصلاح ذرات از طریق استری کردن با انیدرید استیک بدون حضور هیچ‌گونه کاتالیزور و یا حلالی در دمای 120 درجه سانتی‌گراد و زمان 240 دقیقه انجام گرفت. مقدار (درصد) افزایش وزن به‌دست آمده برای ذرات با اندازه‌های مختلف متفاوت بود. ذرات باگاس اصلاح شده و اصلاح نشده (شاهد) به‌طور مجزا آغشته به رزین فنول فرمالدهید (رزول) تحت پرس قرار گرفته و تخته خرده‌های سه‌لایه تشکیل شد. ویژگی‌های فیزیکی و مکانیکی تخته‌های حاصل اندازه‌گیری شدند. نتایج به‌دست آمده نشان داد که تخته‌های تهیه شده از ذرات باگاس اصلاح شده پایداری ابعادی به مراتب بیش‌تری (در حدود 87 درصد) نسبت به نمونه‌های شاهد داشت در حالی‌که ویژگی‌های مکانیکی تخته‌های استیله شده از ویژگی‌های مکانیکی نمونه شاهد کم‌تر بود.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_211.html}, eprint = {https://jwfst.gau.ac.ir/article_211_14151f04389a03e12dd0a33b19a39255.pdf} } @article { author = {}, title = {Surveying the Relationship of Beech Stand Diameter and Its Spectral Signature on Satellite Data}, journal = {Journal of Wood and Forest Science and Technology}, volume = {17}, number = {3}, pages = {137-150}, year = {2012}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Acquiring up-to-date information about stands is necessary for scientific management and planning of forest. Remote sensing by its great capabilities in this way can be very useful. This study was done to investigate the capability of satellite data for gathering information about Beech diameter specification. 21 plots of one hectare dimension were selected at experimental forest of Kheyroud in Noshahr. In each plot, diameters of all trees above 12.5 cm were measured and recorded. Then geographic specifications of centennial portion and four corners of each plot were recorded and their digital map was prepared. Geometric correction was performed up to orthorectification level with affine transformation and resampling of nearest neighbour with less than 0.6 pixel error. For surveying of synthetic bands and various indices, Principle component analysis, Ratio and Fusion were used. Then digital numbers matching with plots from principle and synthetic bands were extracted and used in regression analysis test. Results showed that maximum correlation of diameter was with G/R, GRVI, [(G+NIR)-R]/(G+R+NIR), R+G+NIR with correlation coefficients of -69%, -67%, -54% and -53%, respectively. After extraction of correlation coefficients, equations of relationship between diameter and digital numbers of images were produced. Results of this study supported the hypothesis of possibility of predicting diameter of Beech stands using satellite images.}, keywords = {}, title_fa = {بررسی ارتباط مشخصه قطر در توده راش با برخی علایم طیفی آن در تصویر ماهواره‌ای}, abstract_fa = {کسب اطلاعات به‌هنگام از وضعیت توده‌های جنگلی لازمه برنامه‌ریزی و مدیریت جنگل است. در این راستا علم سنجش از دور با قابلیت‌های فراوان می‌تواند بسیار سودمند باشد. از این رو به‌منظور بررسی امکان کسب اطلاعات مشخصه قطر به‌وسیله تصاویر ماهواره‌ای، اقدام به انجام این پژوهش شد. به این منظور در توده‌های خالص راش جنگل آموزشی خیرودکنار نوشهر، 21 پلات یک هکتاری، به روش انتخابی برداشت گردید. در داخل پلات‌ها قطر کلیه درختان بالای 5/12 سانتی‌متر اندازه‌گیری و یادداشت شد. همچنین مختصات مراکز و چهار گوشه پلات‌ها ثبت، و نقشه رقومی پلات‌ها تهیه گردید و سپس تصحیح هندسی تصویر تا سطح تصحیح خطای جابجایی با استفاده از معادله درجه اول و روش درون‌یابی نزدیک‌ترین همسایه با خطای1 زیر 6/0 پیکسل انجام شد. به‌منظور بررسی باندهای مصنوعی و شاخص‌های مختلف، پردازش‌هایی مانند ادغام، نسبت‌گیری طیفی و تجزیه مؤلفه‌های اصلی بر تصویر اعمال گردید. سپس ارزش‌های طیفی متناظر پلات‌ها از باندهای اصلی و مصنوعی استخراج، و پس از اعمال آزمون نرمال بودن بر داده‌های طیفی و زمینی، در تحلیل همبستگی مورد استفاده قرار گرفت. نتایج نشان داد که بیش‌ترین میزان همبستگی قطر با شاخص‌های G/R، GRVI، [(G+NIR)-R]/(G+R+NIR) و G+R+NIR و به‌ترتیب 69- درصد، 67- درصد، 54- درصد و 53- درصد بود. پس از استخراج ضرایب همبستگی معادلات روابط قطر با ارزش‌های طیفی به‌دست آمد. نتایج این پژوهش فرضیه امکان برآورد مشخصه قطر در توده خالص راش مشابه توده مورد مطالعه را، به‌وسیله تصاویر ماهواره‌ای تقویت نمود.}, keywords_fa = {}, url = {https://jwfst.gau.ac.ir/article_212.html}, eprint = {https://jwfst.gau.ac.ir/article_212_17bce5a2dbad1e9baaca1ffa3ad0ca20.pdf} }