@article { author = {}, title = {Spatial variations of diameter of Pistacia atlantica (Desf.) trees in Zagros area (Case Study: Pirkashan, Kermanshah}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {1-20}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In order to better identify the structure of Pistacia atlantica stands in Zagros forests, diameter structure was analyzed using geostatistics technique in a pure stand of Pistacia atlantica. For this purpose all the trees in the stand were mapped and their stem diameters were measured at breast height. Diameter distribution showed that more than 90% of trees belong to diameter classes 25 to 80 cm. Furthermore, no tree was observed with the DBH<16 cm because of unsuccessful establishment of regeneration during the last decades. An omnidirectional variogram was used to variography because of the no sign of anisotropy. An exponential model was fitted to the experimental variogram and then estimations were mad using ordinary kriging. Ripley’s K function was used to survey trees spatial pattern. Results indicated an average spatial structure for DBH in this stand with lag distance 15 m and effective range 85.2 m. The spatial pattern of trees was aggregated confirming the positive correlation between trees. It implied that unsuccessful establishment of regeneration and the quality of seedbed resulted in the existing of this spatial structure. Because on one hand there was no tree with DBH<16 cm and on the other hand trees with DBH<40 cm were just observed in rocky places between stones.  }, keywords = {Geostatistics,Kriging,Pistacia atlantica,Spatial structure,Variogram}, title_fa = {تغییرات مکانی قطر درختان بنه (Pistacia atlantica Desf.) در ناحیه زاگرس (مطالعه موردی: پیرکاشان، کرمانشاه)}, abstract_fa = {به‌منظور شناسایی بهتر ساختار توده‌های بنه در جنگل‌های زاگرس، ساختار مکانی برای متغیر قطر با استفاده از روش آمار مکای در یک توده خالص بنه (Pistacia atlantica) بررسی شد. برای این منظور مختصات دقیق تمام درختان موجود در توده تعیین و قطر برابر سینه آن‌ها اندازه‌گیری شد. نتایج به‌دست آمده از بررسی فراوانی طبقات قطری نشان داد که بیش از 90 درصد درختان در طبقات قطری 80-25 سانتی‌متر قرار گرفته‌اند. همچنین به‌دلیل استقرار نداشتن زادآوری در دهه‌های پیشین درختان با قطر کم‌تر از 16 سانتی‌متر در توده دیده نشد. برای بررسی ساختار مکانیبا توجه به مشاهده نشدن علایم ناهم‌سان‌گردی از واریوگرام چندجهته استفاده شد. سپس واریوگرام تجربی به‌دست آمده با استفاده از مدل نمایی برازش داده و برآوردها با روش کریجینگ معمولی انجام شد. الگوی پراکنش درختان نیز با استفاده از روش K رایپلی محاسبه شد. نتایج استفاده از آمار مکانی نشان داد که متغیر قطر برابر سینه درختان در این توده با طول گام 15 متر و دامنه مؤثر 2/85 متر دارای ساختار مکانی متوسطی (62 درصد) است. الگوی پراکنش کپه‌ای درختان نیز تأییدکننده وجود همبستگی مکانی مثبت بین درختان بود. وجود ساختار مکانی به‌دلیل دو عامل نوع بستر بذر و استقرار نداشتن زادآوری است. به‌طوری از یک طرف درختان با قطر کم‌تر از طبقه قطری 15 سانتی‌متری دیده نمی‌شد و از طرف دیگر درختان با قطر کم‌تر از 40 سانتی‌متر فقط در مناطق سنگی دیده می‌شدند.}, keywords_fa = {: آمار مکانی,بنه,ساختار مکانی,کریجینگ,واریوگرام}, url = {https://jwfst.gau.ac.ir/article_1005.html}, eprint = {https://jwfst.gau.ac.ir/article_1005_a968797808be3a4fbd96ccfda880f0a1.pdf} } @article { author = {}, title = {Investigation on some quantitative and qualitative characteristics of Juniper stands in Aminabad of Firouzkoh}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {21-40}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In order to investigate on qualitative and quantities characteristics of Juniper stands, a 613 ha case study area was chosen in the Aminabad of Firouzkoh. In this study, the stratified sampling method was used and the study area was stratified to homogenous regions based on slope, aspect and geological unites in GIS environment. By combining the slope and aspect maps, we made the landform unit map. Landform unit map and geology map were then overlaid to produce the homogenous unit map. Then 42 units randomly selected for forest inventory and in each unit randomly one point specified as centre of cluster. After visiting the study area, the Juniper coverage were observed only in 20 clusters and others clusters were bare and without Juniper coverage. In conclusion, in the 20 clusters containing the Juniper trees, center and other 4 points around them in main geographical aspect in distance about 50 meters from centre of cluster have considered as plot with 1000 m2 area. In each plot, tree height, diameter at breast height, coppice or seeding crop, sexuality, crown canopy area, slope percentage and geographical aspect were measured and computed for each cluster in terms of hectare. Relation analysis by ANOVA test was used for differentiation test between clusters based on qualitative and quantities characteristics of Juniper stands. The results shown that in the study area the juniper stands are as irregular even aged stands with the left skew ness in point of distribution of trees in diameter class. Results showed an intense decreasing in 30 cm diameter class regenerations due to human activities and close to road and village of Aminabad. In addition, result of canopy cover density in the study area showed that the Juniper stand of Aminabad is thinner in comparison with other studied Juniper stands. The mean, maximum and minimum of tree density in each plot was 31.5, 170 and 0 in hectare respectively. The mean, maximum and minimum tree height in the study area was computed 4.9, 10 and 2 meter, respectively. The maximum measured DBH of juniper trees was 62 centimeters. Also the mean, maximum and minimum canopy cover of study were 750, 2470 and 0 m2, respectively. According to qualification, the percent of seeding crop trees in the whole stand is more than coppice trees and between male, female and ambisexual, we can see females are more than the other kinds.}, keywords = {: Juniper,Qualitative and quantitative status,Homogenous units,Aminabad of Firouzkoh}, title_fa = {بررسی برخی ویژگی‌های کمی و کیفی توده ارس (Juniprus excelsa) امین‌آباد فیروزکوه}, abstract_fa = {به‌منظور بررسی وضعیت کمی و کیفی جنگل‌های ارس، توده جنگلی ارس امین‌آباد فیروزکوه به وسعت 613 هکتار انتخاب شد. در این پژوهش قبل از نمونه‌برداری از روش مونه‌بندی استفاده گردید، به این ترتیب نقشه‌های طبقات شیب، جهت‌های اصلی جغرافیایی و واحدهای زمین‌شناسی برای منطقه بالا در محیط GIS تهیه گردید. با تلفیق نقشه طبقات شیب و جهت‌ها، نقشه واحدهای شکل زمین تهیه و با روی‌هم‌گذاری نقشه واحدهای زمین‌شناسی برروی نقشه واحدهای شکل زمین، نقشه واحدهای همگن منطقه به‌دست آمد. سپس به‌طور تصادفی در این منطقه 42 واحد برای آماربرداری انتخاب و در هر واحد به‌طور تصادفی یک مرکز خوشه تعیین گردید. پس از بازدید میدانی مشخص گردید که تنها 20 نقطه از این نقاط دارای پوشش درختی بوده و بقیه بدون پوشش می‌باشند، در نتیجه نقاط تصادفی دارای پوشش به‌عنوان مرکز خوشه انتخاب و 4 نقطه دیگر در اطراف، در جهت‌های اصلی و به فاصله 50 متری از مرکز خوشه به‌عنوان مرکز پلات در نظر گرفته شد و در هر یک از این خوشه‌ها 5 قطعه نمونه 10 آری پیاده گردید. در هر قطعه نمونه، مشخصه‌های ارتفاع درخت، قطر برابر سینه، دانه‌زاد یا شاخه‌زاد بودن، جنسیت، سطح تاج پوشش، درصد شیب و جهت شیب اندازه‌گیری و برداشت گردید. مقادیر این مشخصه‌ها در هر خوشه محاسبه گردید. آنالیز تفاوت آماری بین خوشه‌ها از نظر هر یک از مشخصه‌های کمی و کیفی با ANOVA بررسی گردید. نتایج بررسی‌های به‌عمل آمده نشان می‌دهد، رویشگاه مورد بررسی از نظر پراکنش درختان در طبقات قطری دارای ساختار هم‌سال نامنظم با چولگی به چپ می‌باشد، ضمن این‌که در طبقه قطری 30 سانتی‌متر با کاهش محسوسی در تعداد درختان مواجه می‌گردد که با توجه به نزدیکی رویشگاه به روستا و مناسب بودن این طبقه قطری جهت برداشت، می‌توان علت را در دخالت‌های انسانی جستجو کرد. میانگین، بیشینه و کمینه تعداد درخت مشاهد شده در هر قطعه نمونه بر حسب هکتار به‌ترتیب برابر با 5/31، 170 و صفر بوده است. این آماره‌ها برای متغیر سطح تاج پوشش در هکتار به‌ترتیب 750، 2470 و صفر مترمربع بوده است. میانگین، حداکثر و حداقل ارتفاع درختان به‌ترتیب برابر با 9/4، 10 و 2 متر بوده است. بالاترین قطر برابر سینه مشاهد شده 62 سانتی‌متر بوده است. از نظر کیفی، درصد درختان دانه‌زاد در کل توده بیش از درختان شاخه‌زاد بوده و در بین پایه‌های نر، ماده و نرماده، پایه ماده بیش از سایر پایه‌ها مشاهده گردید.}, keywords_fa = {ارس,مشخصات کمی و کیفی,واحدهای همگن,امین‌آباد فیروزکوه}, url = {https://jwfst.gau.ac.ir/article_1006.html}, eprint = {https://jwfst.gau.ac.ir/article_1006_d4c788e2276f6a36818fab59cd77af73.pdf} } @article { author = {}, title = {Comparative Investigation on Different Methods for Improving Strength Properties of OCC Pulp}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {41-59}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {The pulp strength properties of old corrugated containers (OCC) are reduced as a result of recycling process. So at present paper, improvement of OCC pulp properties was investigated through refining and also using cationic starch and imported unbleached softwood kraft pulp (USKP). In addition to studying the effects of each of above mentioned parameters, the effects of combined treatment of refining + cationic starch, refining + USKP, and cationic starch + USKP were also investigated. Cationic starch at 3 dosing levels (0.5, 1.0 and 1.5%) and USKP at 3 dosing levels (5, 10 and 15%) were used in admixture with refined and unrefined OCC pulps. The results have shown that treatments such as refining, cationic starch, USKP, and cationic starch + USKP significantly improved the OCC strength properties. The highest strengths were obtained from treatment of 1% cationic starch + 15% USKP, which in comparison with reference sample; about 40% increase in burst and tensile strength, and 30% increase in tear strength were occurred. Air resistant, in treatment where 1.5% cationic starch was used in refined pulp, was increased 45% as compared with the reference sample. The results showed that the optimum treatment, in terms of obtaining highest improvement in OCC pulp properties, was a combined treatment of refining + cationic starch + USKP. However, depending on the required end use quality, OCC pulp can be improved by using refining treatment with or without using different dosages of cationic starch and USKP.}, keywords = {Refining,Cationic Starch,Softwood kraft pulp,OCC}, title_fa = {بررسی مقایسه‌ای روش‌های مختلف بهبود ویژگی‌های مقاومتی خمیرکاغذ OCC}, abstract_fa = {ویژگی‌های مقاومتی خمیرکاغذ به‌دست آمده از کارتن‌های کنگره‌ای کهنه (OCC) در اثر عمل بازیافت کاهش می‌یابد. بنابراین در این مقاله، بهبود ویژگی‌های خمیرکاغذ OCC از طریق تیمار پالایش و نیز استفاده از نشاسته کاتیونی و خمیر الیاف بلند وارداتی بررسی گردید. علاوه‌بر تأثیر مستقل هر یک از این متغیرها، اثر ترکیب پالایش و نشاسته، پالایش و خمیر الیاف بلند و نشاسته و خمیر الیاف بلند نیز ارزیابی گردید. از نشاسته کاتیونی در 3 سطح (5/0، 1 و 5/1) درصد و خمیر الیاف بلند در 3 سطح (5، 10 و 15) درصد به‌صورت اختلاط با خمیر پالایش نشده و پالایش شده استفاده شد. نتایج نشان داد که تیمارهای پالایش، نشاسته کاتیونی، خمیر الیاف بلند و ترکیب نشاسته و خمیر الیاف بلند به‌طور معنی‌داری باعث بهبود ویژگی‌های مقاومتی خمیر OCC شدند. بالاترین مقاومت‌ها از ترکیب 1 درصد نشاسته کاتیونی و 15 درصد خمیر الیاف بلند به‌دست آمد که در مقایسه با نمونه شاهد، حدود 40 درصد افزایش در شاخص مقاومت به ترکیدن، 40 درصد افزایش در مقاومت به کشش، 30 درصد افزایش در مقاومت به پاره شدن را به همراه داشت. مقاومت به عبور هوا، در تیماری که از 5/1 درصد نشاسته در خمیر پالایش شده استفاده گردید، 45 درصد در مقایسه با شاهد افزایش در برداشت. ‌نتایج به‌دست آمده نشان می‌دهد که تیمار ترکیبی پالایش، نشاسته و خمیر الیاف بلند، از نظر بهبود ویژگی‌های خمیرکاغذ OCC، تیمار بهینه‌ای است، اما بسته به کیفیت و نیازمندی مورد نیاز، می‌توان از تیمار پالایش با و یا بدون استفاده از درجه‌های مختلف نشاسته کاتیونی و خمیر الیاف بلند، برای بهبود ویژگی‌های خمیر OCC استفاده کرد.}, keywords_fa = {پالایش,نشاسته کاتیونی,خمیر کرافت سوزنی‌برگان,خمیرکاغذ OCC}, url = {https://jwfst.gau.ac.ir/article_1007.html}, eprint = {https://jwfst.gau.ac.ir/article_1007_315e3e9dd6e6e2d2d3324b1e6441837a.pdf} } @article { author = {}, title = {Effects of Physiographic factors and Some Physical and Chemical Soil Properties on Distribution Amygdalus scoparia Spach. in 4 Areas of Markazi Province}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {59-76}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Investigation on site demands of forest species such as physiographical factors and soil characteristic are necessary for improvement, reclamation and conservation of plant cover. Amygdalus scoparia Spach. is one of the most important forest species in Markazi Province with edible use, industrial, environmental and protective values. In this research, firstly, all of the regions were surveyed and with regard to variables such as aspect, altitude and slope, sampling performed by 61 plots and GPS device in four areas of Jalayer Saveh, Nimvar Mahalat, Jaftan Tafresh and Sarabadn Tafresh. In each sample plot, some physical and chemical soil properties (K, Caco3, C, N, clay, silt, sand, EC, pH and P) and as well as quantitative measurement of species growth such as (tree density in hectare, crown diameter, height, basal area each tree, basal area in hectare and regeneration) were conducted and then the data were analyzed using SPSS and PC-ORD. The results of One Way ANOVA showed that of altitude, slope, Caco3, EC, P in Nimvar Mahalat, sand and basal area in hectare in Jalayer Saveh and Sarabadan Tafresh, tree density in hectare in Sarabadan Tafresh had the highest amount. The lowest altitude and silt is in Jalayer Saveh. The results Principal Component Analysis (PCA) showed that all of the quantitative measurements of species growth were distributed in the positive direction of the 1st axis. The highest positive correlation with the 1st axis is in Jalayer Saveh and 2nd axis in Nimvar Mahalat. Sand and N in the first quarter (Sarabadan Tafresh and Jalayer Saveh), altitude, slope and P in the second quarter (Nimvar Mahalat) and C in the fourth quarter (Jaftan Tafresh) are the most important affecting factors on distribution of Almond.}, keywords = {Markazi Province,Amygdalus scoparia Spach,distribution,Principal component analysis,soil characteristics}, title_fa = {تأثیر فیزیوگرافی و برخی خصوصیات فیزیکی و شیمیایی خاک بر پراکنش گونه بادامک در 4 منطقه از استان مرکزی}, abstract_fa = {بررسی نیاز رویشگاهی از جمله فیزیوگرافی و خصوصیات خاک گونه‌های مهم جنگلی برای اصلاح، احیاء و حفاظت پوشش گیاهی ضروری می‌باشد. یکی از گونه‌های مهم جنگلی استان مرکزی بادامکSpach.  Amygdalus scoparia می‌باشد که دارای استفاده خوراکی و صنعتی و ارزش زیست‌محیطی و حفاظتی است. در این پژوهش پس از جنگل گردشی و بررسی مقدماتی منطقه و با توجه به متغیرهایی مانند جهت جغرافیایی، ارتفاع از سطح دریا و شیب اقدام به پیاده نمودن 61 قطعه با اسنفاده از دستگاه GPS در 4 منطقه جلایر ساوه، نیمور محلات، جفتان تفرش و سرآبادان تفرش گردید. در هر یک از قطعات نمونه برخی خصوصیات فیزیکی و شیمیایی خاک (پتاسیم قابل جذب، آهک، کربن آلی، ازت آلی، رس، سیلت، شن، هدایت الکتریکی، اسیدیته و فسفر قابل جذب) و اندازه‌گیری‌های کمی رویشی گونه (تعداد درخت در هکتار، قطر تاج، ارتفاع درخت، سطح مقطع تاج هر درخت، سطح مقطع تاج در هکتار و تجدید حیات) انجام و با نرم‌افزارهای SPSS و PC-ORD مورد تجزیه تحلیل آماری قرار گرفتند. نتایج به‌دست آمده از آزمون تجزیه واریانس یک‌طرفه نشان داد که بیش‌ترین ارتفاع از سطح دریا، شیب، آهک، هدایت الکتریکی و فسفر در منطقه نیمور محلات، بیش‌ترین مقدار درصد شن و سطح مقطع تاج در هکتار در مناطق جلایر ساوه و سرآبادان تفرش، بیش‌ترین تعداد درخت در هکتار در منطقه سرآبادان تفرش و کم‌ترین ارتفاع از سطح دریا و سیلت در منطقه جلایر ساوه وجود دارد. همچنین تحلیل مؤلفه‌های اصلی بیانگر آن است که همه مشخصه‌های رویشی در جهت مثبت محور اول پراکنده شده‌اند. منطقه جلایر ساوه بیش‌ترین همبستگی مثبت را با محور اول و نیمور محلات با محور دوم نشان می‌دهد. در ربع اول و در مناطق سرآبادان و جلایر ساوه درصد شن و ازت کل و در ربع دوم و در منطقه نیمور محلات ارتفاع از سطح دریا، شیب و فسفر و در ربع چهارم و در منطقه جفتان تفرش کربن آلی از مهم‌ترین عوامل تأثیرگذار بر پراکنش بادامک می‌باشند.}, keywords_fa = {استان مرکزی,بادامک,پراکنش,تحلیل مؤلفه‌های اصلی,ویژگی‌های خاک}, url = {https://jwfst.gau.ac.ir/article_1008.html}, eprint = {https://jwfst.gau.ac.ir/article_1008_e435fa40dd38d0900dcadee880784f63.pdf} } @article { author = {}, title = {The influence of cationic polymer type, cationic poly acryl amid and cationic starch, on performance of nano silica for newspaper pulp and paper improvement}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {77-94}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {This study was performed to investigate the effects of the type of cationic polymer, cationic poly acryl amid and cationic starch, on performance of nano silica for newspaper pulp and paper improvement. After preparation of chemi-mechanical pulp (CMP) and long fiber bleached Kraft pulp, they mixed together and precipitated calcium carbonate (PCC) was added as filler to the stock. As a retention aid system, the composition of cationic starch + nano silica, and also the composition of cationic poly acryl amid + nano silica were added to the stock. The pulp drainability, first pass retention and also newspaper structural, mechanical strength and optical properties were measured and the obtained data were compared with the witness data. The witness samples were the treatments that used only cationic poly acryl amid as retention aid. The analysis of results showed that the cationic polymer factor had considerable effects on performance of nanosilica for newspaper pulp and paper improvement. The stock that had been treated with the composition of cationic starch + nano silica had better and more drainability and higher first pass retention compare to the stock that treated with the composition of poly acryl amid + nano silica. And also the hand sheets that made with the composition of cationic starch + nano silica, had better formation quality, less porosity and higher mechanical strength properties in higher filler content in paper compare to the hand sheets that made with composition of poly acryl amid + nano silica.}, keywords = {Cationic polymer,Nano silica,Newspaper,formation,strength properties}, title_fa = {تأثیر نوع عامل کاتیونی (پلی‌اکریل آمید و نشاسته کاتیونی) بر عملکرد نانوذرات سیلیکای کلوییدی در بهبود خواص خمیر و کاغذ روزنامه}, abstract_fa = {این پژوهش با هدف بررسی تأثیر نوع عامل کاتیونی یعنی پلی‌اکریل آمید کاتیونی و یا نشاسته کاتیونی بر عملکرد نانوذرات سیلیکای کلوییدی در بهبود خواص خمیر و کاغذ روزنامه انجام پذیرفت. بعد از آماده‌سازی اولیه خمیرهای شیمیایی- مکانیکی (CMP)و خمیر الیاف بلند کرافت رنگ‌بری شده و اختلاط این خمیرها با یکدیگر و اضافه نمودن ماده پرکننده معدنی کربنات کلسیم رسوبی، به‌عنوان مواد کمک نگه‌دارنده، ترکیب نشاسته کاتیونی + نانوسیلیکای کلوییدی و همچنین ترکیب پلی‌اکریل آمید کاتیونی + نانوسیلیکای کلوییدی به مجموعه خمیر و مواد پرکننده اضافه گردید و ویژگی‌های مربوط به قابلیت آب‌گیری، مقدار ماندگاری نرمه‌های الیاف و مواد پرکننده در گذر نخست و ویژگی‌های ساختاری، مقاومتی و نوری کاغذ روزنامه اندازه‌گیری و مقادیر به‌دست آمده با مقادیر شاهد یعنی استفاده از ماده پلی‌اکریل آمید کاتیونی به‌عنوان ماده کمک نگه‌دارنده، مقایسه گردید. نتایج تجزیه و تحلیل نشان داد که نوع عامل کاتیونی تأثیر قابل‌ملاحظه‌ای در عملکرد نانوسیلیکا در بهبود خواص خمیر و کاغذ روزنامه داشته است. خمیر تیمار شده با ترکیب نشاسته کاتیونی و نانوسیلیکا در مقایسه با ترکیب پلی‌اکریل آمید کاتیونی و نانوسیلیکا دارای قابلیت آب‌گیری و مقدار ماندگاری نرمه‌های الیاف و مواد پرکننده بهتر و بیش‌تری بوده و همچنین کاغذ ساخته شده با ترکیب نشاسته کاتیونی و نانوسیلیکا در مقایسه با ترکیب پلی‌اکریل آمید کاتیونی و نانوسیلیکا دارای کیفیت شکل‌گیری بهتر، تخلخل کم‌تر و بیش‌تر بودن مقاومت‌های مکانیکی کاغذ در مقادیر بالای مواد پرکننده بوده است}, keywords_fa = {پلیمرهای کاتیونی,نانوسیلیکا,کاغذ روزنامه,شکل‌گیری,ویژگی‌های مقاومتی}, url = {https://jwfst.gau.ac.ir/article_1009.html}, eprint = {https://jwfst.gau.ac.ir/article_1009_4931739aeb43bf3259bfd406c0552d45.pdf} } @article { author = {}, title = {Studying the possibility of using Landsat ETM+ imagery for separating different mixtures of Beech and Hornbeam in northern forest of Iran (Case Study: Choe Jie forest)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {95-110}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {This research focused on determining the possibility of separating different percents of Beech and Hornbeam species based on two methods of spectral reflectance assessment and classification using landsat imagery in a northern forest of Iran. To do this, Landsat7 ETM+ imagery of the study area for 24 June, 2000 (middle of germination season) were provided. The 100×100 m (1 ha) sample plots with 90m distances from each other over 3 areas containing Beach and Hornbeam mixtures were transmitted from forest type map on a 1:25000 scale. Four groups were determined after field inventory, I) pure Beech, II) 80% Beech and 20% Hornbeam, III) 70% Beech and 30% Hornbeam and IV) 60% Beech and 40% Hornbeam. To avoid road reflectance interference with tree reflectance, sample plots were selected with 60 m distance from roads. Followed by digitizing the roads and plots, the images were geometrically corrected at the ortho level using 13 ground control points. Then, the digitized roads and sample plots were overlaid on 6 bands (1, 2, 3, 4, 5 and 7) of the ETM+ imagery and their pixel data were extracted. In the next step, the obtained data was statistically analyzed. The differences among the selected groups were compared via t-test method. The results showed the capability of ETM+ imagery in separating the pure Beech from the mixture of 70% Beech and 30% Hornbeam and 60% Beech and 40% Hornbeam. Then, the images were classified using a Maximum Likelihood Algorithm. Based on the classification results, the maximum likelihood were measured with 63% total accuracy and 44% kappa coefficient. The results of comparing four above mentioned groups using maximum likelihood classification method were in accordance with the results of applying their pixel values.}, keywords = {Beech,hornbeam,Landsat ETM+,Classification,Mixtures of forest species}, title_fa = {مطالعه امکان تفکیک اختلاط گونه‌های راش و ممرز با استفاده از تصاویر سنجنده ETM+ماهواره لندست 7 (مطالعه موردی: در جنگل چوئه‌ژیه)}, abstract_fa = {در این پژوهش در جنگل‌های خزری به مطالعه امکان تفکیک درصدهای مختلف دو گونه درختان راش (Fagus orientalis) و ممرز (Carpinus betulus) بر مبنای دو روش تفکیک انعکاس طیفی و روش طبقه‌بندی زمینی با استفاده از اطلاعات ماهواره‌ای اقدام گردیده ‌است. برای انجام این کار داده‌های سنجنده ETM+ لندست- 7 مربوط به تاریخ 24/6/2000 میلادی (اواسط فصل رویش) تهیه شد، سپس با توجه به نقشه تیپ‌بندی شده جنگل پلات‌های آماری به ابعاد 100×100 متر (یک هکتار) و به فاصله 90 متر از یکدیگر در سه منطقه که اختلاط درختان راش و ممرز وجود داشت، بر روی نقشه 1:25000 پیاده شدند. بعد از آماربرداری زمینی چهار گروه اختلاط به‌دست آمد که عبارتند از گروه ‌اول) ترکیب خالص راش، گروه دوم) اختلاط 80 درصد راش و 20 درصد ممرز، گروه‌ سوم) اختلاط 70 درصد راش و 30 درصد ممرز و گروه چهارم) اختلاط 60 درصد راش و 40 درصد ممرز. برای جلوگیری از تأثیرات انعکاس جاده‌ روی انعکاس درختان، جاده‌های رقومی شده و پلات‌های نمونه با فاصله‌ 60 متر از جاده انتخاب گردیدند و تصحیحات هندسی تا سطح ارتو با استفاده از 13 نقطه کنترل زمینی بر روی تصاویر انجام شد. جاده‌ها و پلات‌های رقومی شده بر روی باندهای 1، 2، 3، 4، 5 و 7 تصویر سنجنده ETM+ قرار داده ‌شد و اطلاعات پیکسلی آن‌ها استخراج گردید. سپس این اطلاعات مورد تجزیه و تحلیل آماری قرار گرفته و تفاوت میانگین بین گروه‌ها با آزمون t-test مورد مقایسه قرار گرفت. نتایج به‌دست آمده بیانگر آن است که تصاویر سنجنده ETM+ که مربوط به اواسط فصل رویش می‌باشد قادر به تفکیک ترکیب خالص راش از اختلاط 70 درصد راش و 30 درصد ممرز و پایین‌تر می‌باشد. طبقه‌بندی تصویر با الگوریتم حداکثر احتمال انجام گردید. در طبقه‌بندی با چهار گروه، بیش‌ترین میزان احتمال با صحت کلی 63 درصد و ضریب کاپا 44 درصد بوده است. در پایان این نکته قابل ذکر می‌باشد که نتیجه طبقه‌بندی چهار گروه بالا با نتیجه استخراج شده از روش استفاده از ارزش‌های پیکسلی آن‌ها هم‌خوانی دارد. به این معنی که این طبقه‌بندی توانست جامعه با ترکیب خالص راش را با جامعه مرکب از اختلاط 70 درصد راش و 30 درصد ممرز و پایین‌تر را در طبقات جداگانه‌ای تفکیک نموده است.}, keywords_fa = {: راش,ممرز,لندست ETM+,طبقه‌بندی,اختلاط گونه‌ای}, url = {https://jwfst.gau.ac.ir/article_1010.html}, eprint = {https://jwfst.gau.ac.ir/article_1010_e337bbc25992c16003d9fae31fd8c47a.pdf} } @article { author = {}, title = {The Effect of Oleothermal Treatment on Physical and Mechanical Properties of Beech Wood}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {111-126}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Influence of the oleothermal treatment as one of the thermal wood modification techniques on physical and mechanical properties of beech wood was studied in the current research work. For this purpose, beech wood samples were cut with sizes of 20×20×20 mm (r×t×l) to determine the physical properties and samples with sizes of 20×20×140 mm (r×t×l) to determine the mechanical properties. The samples were treated in sunflower oil at temperatures of 200, 230 and 260 °C for 30 minutes. The wood samples were soaked in water to determine the water absorption as well as the swelling properties. Bending strength as well as the impact load resistance was determined in the treated and untreated samples. Results revealed that the Oleothermal treatment of the wood reduced the water absorption as well as the swelling in beech wood, significantly. Treatment of the beech wood in sunflower oil enhanced the water repellence effect (WRE) and the anti-swelling effects (ASE). It was also revealed that mechanical properties (bending strength as well as the impact load resistance) were reduced by increase of the treatment temperature.}, keywords = {Oleothermal modification,Sunflower oil,Physical and mechanical properties,Beech wood (Fagus orientalis Lipsky)}, title_fa = {اثر تیمار روغن گرمایی بر ویژگی‌های فیزیکی و مکانیکی چوب راش}, abstract_fa = {در این پژوهش، اثر تیمار روغن گرمایی بر خواص فیزیکی و مکانیکی چوب راش به‌عنوان یکی از روش‌های اصلاح گرمایی چوب مورد بررسی قرار گرفت. برای این منظور نمونه‌های آزمونی از چوب راش با ابعاد 20×20×20 میلی‌متر (طولی × شعاعی × مماسی) برای بررسی برخی از ویژگی‌های فیزیکی و 140×20×20 میلی‌متر (طولی × شعاعی × مماسی) برای مطالعه برخی از خواص مکانیکی برش داده شدند و در روغن آفتاب‌گردان در دماهای 200، 230 و 260 درجه سانتی‌گراد به‌مدت 30 دقیقه تیمار گردیدند. برای تعیین ویژگی‌های جذب آب و واکشیدگی، نمونه‌های چوب در آب غوطه‌ور شدند. مقاومت‌های خمشی و مقاومت به ضربه در نمونه‌های تیمار شده و تیمار نشده تعیین گردیدند. نتایج بررسی نشان دادند که تیمار روغن گرمایی سبب کاهش معنی‌دار جذب آب و واکشیدگی چوب راش گردید. تیمار این چوب در روغن آفتاب‌گردان با دماهای گوناگون سبب افزایش بازدارندگی جذب آب و اثر ضدواکشیدگی شد. هم‌چنین مشخص شد که با افزایش دمای تیمار، ویژگی‌های مکانیکی (مقاومت‌های خمشی و ضربه) کاهش یافتند.}, keywords_fa = {: اصلاح روغن گرمایی,روغن آفتاب‌گردان,ویژگی‌های فیزیکی و مکانیکی,راش شرقی (Fagus orientalis Lipsky)}, url = {https://jwfst.gau.ac.ir/article_1011.html}, eprint = {https://jwfst.gau.ac.ir/article_1011_5d31695c76b19ebe4e96cff41780cede.pdf} } @article { author = {}, title = {The effect of seed morphology and different altitude origins of Persian oak (Quercus brantii Lindl.) on germination and growth of one year old seedlings}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {124-141}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Seeds of Persian oak from three altitude regions of  low, middle and high (1300, 1700 and 2000 meter of sea level) in Noorabad forests of Lorestan province were collected to investigate the effects of some morphological traits and altitude origins of seed on growth traits of seedlings. After measuring of seed morphological traits such as length, width, volume and number of seed per kilogram for each maternal tree, seeds were sown in common garden of Yasuj University. Then, germination rate, growth parameters like height, collar diameter, leaf number, volume and survival rate of seedlings were measured. The results showed that except of seed length, all morphological traits of seeds were different among three altitude origins. Although no differences was observed among germination rate of different altitude origins, but seedlings from low and high altitude origin showed significantly highest and lowest values of seedling vigor index, growth parameters and number of green leaves to total leaves. Also survival rate of seedlings from low and middle altitudes origin had highest and lowest values, respectively. Results of correlation analysis revealed that morphological traits of seeds were positively correlated with germination rate and growth parameters of seedlings, but there was not any significant correlation between seed morphological traits and survival of seedlings rate. In addition, the results of this research illustrated that the usage of larger and heavier seeds from low altitude origins can be conducted to more successful in plantations of Yasuj during first year of growth.}, keywords = {Persian oak,plantation,Seedling growth,Seed morphology}, title_fa = {بررسی اثر صفات مرفولوژی بذر و مبدأهای ارتفاعی مختلف بذر بلوط ایرانی (Quercus brantii Lindl.) بر سبز شدن و رویش نهال‌های یک‌ساله}, abstract_fa = {به‌منظور بررسی میزان تأثیر صفات مورفولوژی و مبدأ بذر بلوط ایرانی بر صفات رویشی نهال‌های به‌دست آمده، بذور سه ناحیه ارتفاعی پایین‌بند، میان‌بند و بالابند (1300، 1700 و 2000 متر از سطح دریا) جنگل نورآباد استان لرستان جمع‌آوری شده و پس از اندازه‌گیری صفات مورفولوژیک بذر هر درخت مادری از جمله طول، پهنا، حجم، وزن و تعداد بذر در کیلوگرم در زمین زراعی دانشگاه یاسوج کاشته شدند. سپس درصد سبز شدن، صفات رویشی مانند ارتفاع، قطر یقه، تعداد برگ، حجم و درصد زنده‌مانی نهال‌ها اندازه‌گیری شدند. نتایج نشان داد که به‌جز طول بذر، دیگر صفات مورفولوژیک بذر سه مبدأ ارتفاعی با هم تفاوت معنی‌دار داشتند. هر چند که در میزان سبز شدن مبدأهای مختلف تفاوتی مشاهده نشد، اما نهال‌های به‌دست آمده از مبداء ارتفاعی پایین و بالا به‌ترتیب به‌طور معنی‌داری بالاترین و کم‌ترین مقادیر شاخص بنیه گیاهچه، پارامترهای رویشی و نسبت تعداد برگ سبز به کل نشان دادند. از نظر زنده‌مانی نیز نهال‌های با مبدأ ارتفاعی پایین و میانی به‌ترتیب از بالاترین و کم‌ترین مقدار برخوردار بودند. نتایج همبستگی نیز نشان داد که رابطه مثبت معنی‌داری بین صفات مورفولوژیک بذر با درصد سبز شدن و پارامترهای رویشی نهال‌ها وجود دارد اما با زنده‌مانی رابطه معنی‌داری نداشتند. به‌طورکلی نتایج این پژوهش نشان داد که استفاده از بذور درشت‌تر و سنگین‌تر به‌دست آمده از مبدأ ارتفاعی پایین می‌تواند موفقیت بالاتری در جنگل‌کاری‌های یاسوج در سال اول رویش داشته باشد.  }, keywords_fa = {بلوط ایرانی,جنگل‌کاری,رویش نهال,مورفولوژی بذر}, url = {https://jwfst.gau.ac.ir/article_1012.html}, eprint = {https://jwfst.gau.ac.ir/article_1012_133bfed12a18c0ca5739a25ed76123a4.pdf} } @article { author = {}, title = {Comparison between the Crystallinity, Thermal degradation, and Morphology of Kenaf Bast and Stalk NaOH-AQ pulp Fibers}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {143-158}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this study, kenaf bast and stalk fibers properties studied to determined their potential in reinforcing of polymeric composite as well as their ability in cellulose extracting process to achieve interested applications such as  producing micro and nano cellulose. Chemical pulps from kenaf bast and stem fibers were prepared using Soda-AQ process by using the 15% NaOH and 0.1% AQ. A three-stage bleaching procedure was carried out, including a DEpD stage for increasing the cellulose content in the produced pulp. The morphology of the obtained fibers were characterized by environmental scanning electron microscopy (ESEM). Microscopy studies revealed that the pulping and bleaching processes separated the fiber bundles to individual fibers, and caused a significant decrease in their diameter. The analysis of the chemical composition indicated an increase in the cellulose content after the chemical treatments. FTIR results also displayed that the chemical treatments could successfully be used to remove lignin and hemicellulose. Thermogravimetric analysis (TGA) revealed that the thermal stability increased in the materials having undergone pulping and bleaching. The TGA results also demonstrated the higher resistance towards heat for both treated and untreated kenaf bast fibers compared to stem fibers. X-ray analyses pointed at a higher crystallinity for the chemically treated fibers, and the highest crystallinity was found for the treated kenaf bast fibers. Finally, it is found that one could be able to produce reinforcing fiber of this plant, considering in all cases kenaf stalk shoed better results comparing to the bast fiber.}, keywords = {: Kenaf bast,Soda-AQ,bleaching,Crystallinity,Morphology}, title_fa = {ارزیابی مقایسه‌ای میان خواص بلورشدگی، حرارتی و مورفولوژیکی الیاف خمیر سودا آنتراکینون پوست و ساقه کنف}, abstract_fa = {در این پژوهش خواص الیاف پوست و ساقه کنف با هدف ارزیابی پتانسیل آن‌ها در تقویت خواص مکانیکی چندسازه‌های پلیمری و امکان استخراج سلولز از این الیاف در دست‌یابی به کاربردهای موردنظر مانند تولید ریزساختارهای سلولزی مورد بررسی قرار گرفت. ابتدا خمیر سودا- آنتراکینون پوست و ساقه کنف تهیه شد. برای دست‌یابی به الیافی با نسبت سلولز بیش‌تر و درصد لیگنین کم‌تر از یک روش رنگ‌بری سه‌مرحله‌ای (DEPD) استفاده شد. ساختار مورفولوژیکی با استفاده از میکروسکوپ الکترونی (ESEM) مشاهده گردید که قطر الیاف، تحت‌تأثیر تیمار شیمیایی به‌شدت کاهش یافت. مطالعه ترکیب شیمیایی الیاف نشان‌دهنده افزایش قابل‌ملاحظه میزان سلولز در الیاف تیمار (شیمیایی) شده در مقایسه با میزان سلولز در الیاف تیمار نشده بود. نتایج آنالیز الیاف با استفاده از اشعه مادون قرمز (FTIR) بیانگر کاهش شدید مقدار لیگنین و همی‌سلولز موجود در الیاف پوست و ساقه کنف درطی فرآیند خمیرسازی و رنگ‌بری بوده، به‌طوری‌که در پایان مرحله رنگ‌بری، تقریباً کل لیگنین موجود از الیاف خارج شد. نتایج به‌دست آمده از آنالیز حرارتی الیاف نشان داد که الیاف تیمار شده نسبت به الیاف تیمار نشده از مقاومت بیش‌تری در مقابل افزایش دما برخوردارند. از مقایسه نتایج استنباط می‌گردد که الیاف به‌دست آمده از پوست کنف در هر دو حالت تیمار شده و تیمار نشده، در مقایسه با الیاف به‌دست آمده از ساقه کنف از پایداری بهتری برخوردارند. در نهایت آنالیز الیاف با استفاده از اشعه ایکس نشان داد که تیمار شیمیایی منجر به افزایش درصد بلورشدگی الیاف گردید. لازم به ذکر است که الیاف رنگ‌بری شده پوست کنف دارای بیش‌ترین درصد بلورشدگی در مقایسه با الیاف ساقه و دیگر مواد بررسی شده بودند. نتایج این پژوهش بیانگر قابلیت این گیاه در تولید الیافی مناسب در تقویت چندسازه پلیمری و با قابلیت اعمال فرایندهای مناسب در تولید ریزساختارهای سلولزی می‌باشد. همچنین، در تمام آزمون‌ها پوست کنف نتایج بهتری را در مقایسه با ساقه آن از خود نشان داده است.}, keywords_fa = {کنف,سودا- آنتراکنیون,رنگ‌بری,بلورشدگی,ریخت‌شناسی}, url = {https://jwfst.gau.ac.ir/article_1013.html}, eprint = {https://jwfst.gau.ac.ir/article_1013_b099a59d67915debb9001e34c2f35798.pdf} } @article { author = {}, title = {Spatial distribution of tree crown dieback and its relation with some environmental factors and road network}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {159-174}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Lately, the tree crown dieback is encountered as an important problem in the northern forests. The main goal of this study is investigation on spatial distribution of the tree crown dieback in relation to primary and secondary topography characteristics and distance from river and roads using terrain analysis and GIS. A 100×500 meters random systematic sampling network with 0.1 ha sample area was designed in GIS and applied on the district 1, Dr. Bahramnia educational forest. The location of trees contain the tree crown dieback were registered using GPS in each sample and was imported to GIS. The digital elevation model (DEM) of the study area was generated using the interpolating of contour lines from 1:25000 topography map and the primary and secondary topography characteristics and distance from river and roads were produced using terrain analysis and GIS. The digital values of location of trees contain the tree crown dieback were extracted on produced maps. The impact of selected factors on the tree crown dieback was assessed using relative effect (RE) method and principal component analysis (PCA). The results showed that the north aspect, 300-400 meter mean sea level altitude, the 30-40 percent slop, the 150-200 meters distance from rivers, the 1-100 meters distance from roads, the shaded relief of 0.4-0.5, solar radiation of 1500-1750, wetness of 15-17.5, profile curvature of 0.1-0.25 and plan curvature of 0.3-0.6 were more effective on the tree crown dieback. The results of PCA analysis also showed that four factors of solar radiation distance from road and river and slop with attending on four axes and 75 percent variances have been effective on tree dieback.}, keywords = {}, title_fa = {بررسی پراکنش سرخشکیدگی درختان جنگلی و ارتباط آن با برخی عوامل محیطی و جاده‌ها (مطالعه موردی: سری یک طرح جنگلداری دکتر بهرام‌نیا)}, abstract_fa = {اخیراً پدیده سرخشکیدگی به‌عنوان یک مسأله مهم در جنگل‌های شمال ایران مطرح شده است. مدیران جنگل درصدد شناسایی عوامل سرخشکیدگی تاج پوشش و تعیین پراکنش مکانی آن می‌باشند. هدف از این پژوهش بررسی پراکنش مکانی سرخشکیدگی تاج پوشش درختان و ارتباط آن‌ها با صفات اولیه و ثانویه توپوگرافی و نیز فاصله از رودخانه‌ها و جاده‌ها با استفاده از آنالیز زمین و GIS است. در این پژوهش شبکه قطعات نمونه 10 آری با استفاده از شبکه آماربرداری به ابعاد 500×100 متر در محیط ArcGIS طراحی و در سری یک جنگل آموزشی و پژوهشی طرح دکتر بهرام‌نیا در گرگان پیاده شد. مختصات جغرافیایی درختان سرخشکیده توسط دستگاهGPS  ثبت و در محیط GIS وارد شدند. مدل رقومی زمین منطقه از نقشه‌‌های رقومی 1:25000 تهیه و عوامل اولیه و ثانویه توپوگرافی با استفاده از آنالیز زمین تولید گردیدند. نقشه جاده‌ها و آبراهه‌ها از پایگاه رقومی طرح مزبور تهیه و نقشه فواصل در محیط GIS در طبقات 100 متری ایجاد گردیدند. به‌منظور بررسی ارتباط بین سرخشیدگی و عوامل موردنظر و با استفاده از نقشه موقعیت درختان سرخشکیده، اطلاعات مربوط به عوامل اولیه و ثانویه و فواصل از جاده و آبراهه استخراج گردیدند. عوامل مؤثر بر سرخشکیدگی با استفاده از دو روش اثر نسبی و آنالیز مؤلفه‌های اصلی (PCA) مورد ارزیابی قرار گرفتند. نتایج نشان می‌دهد که جهت جنوب و جنوب‌شرقی، ارتفاع 400-300 متر، شیب 40-30 و 70-60 درصد، فاصله از رودخانه 200-150 متری، فاصله از جاده 100-1 متری، سایه ناشی از پستی و بلندی 5/0-4/0، میزان تابش 1750-1500، میزان نمناکی 5/17-15، انحنای عمودی 25/0-1/0 و انحنای مسطحاتی 6/0-3/0 بیش‌ترین رابطه را با وقوع سرخشکیدگی درختان در منطقه مورد مطالعه داشته است. نتایج آنالیز مؤلفه‌های اصلی (PCA) نشان داد که چهار متغیر میزان تابش، فاصله از جاده، فاصله از رودخانه و شیب با حضور در چهار محور و 75 درصد واریانس، بیش‌ترین سهم را در وقوع سرخشکیدگی داشته‌اند.}, keywords_fa = {سرخشکیدگی درختان جنگلی,پراکنش مکانی,عوامل اولیه و ثانویه,آنالیز زمین,GIS}, url = {https://jwfst.gau.ac.ir/article_1014.html}, eprint = {https://jwfst.gau.ac.ir/article_1014_108e5b0dc25078ff33b5227feabef9b5.pdf} } @article { author = {}, title = {Investigation on the beech and oak spatial structure in a mixed forest (Case study: Gorazbon district, Kheirud forest)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {175-188}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {For achieving appropriate knowledge on biodiversity with a minimum cost and time to obtain a sustainable forest management, some applicable indices are needed. This study was attempted to describe some spatial structure indices as well as to quantify beech and oak spatial structures in Gorazbon district of Kheirud forest. The indices of uniform angle (UAI), mingling (DMi), DBH dominance (TDi) and DBH differentiation (Tij) were applied to investigate of positioning, mixture and DBH status of neighborhood trees. For this aim, a total of 2149 beech structural groups and 357 oak structural groups were analyzed using Crancod (Ver.1.3) software. The average values of UAI, DMi, TDi and Tij were calculated 0.58, 0.27, 0.53 and 0.45 for beech and 0.57, 0.74, 0.56 and 0.37 for oak respectively. The DMi clearly showed the difference between beech and oak, whereas the values of UAI, TDi and Tij were approximately the same for the studied species. The values of absolute discrepancy algorithm, which employed to quantify difference between beech and oak spatial structures, were 8.8%, 59.3%, 6.2% and 19.2% for UAI, DMi, TDi and Tij respectively. Because of the ability of these indices to precisely demonstrate the differentiation of stands in succession stages and their applicability for comparing the studied stand with others, they can be considered as useful tools for sustainable management.}, keywords = {: Biodiversity,Spatial structure,positioning,Mixture,DBH dominance}, title_fa = {بررسی ساختار مکانی راش و بلوط در یک جنگل آمیخته (مطالعه موردی: بخش گرازبن جنگل خیرود)}, abstract_fa = {برای کسب اطلاعات مربوط به تنوع زیستی و به‌منظور مدیریت صحیح جنگل به شاخص‌هایی نیاز است که بتوانند با صرف کم‌ترین هزینه و زمان اطلاعات کافی را در رابطه با وضعیت فعلی ساختار جنگل و تغییرات آن ارایه دهند. در این پژوهش، ضمن معرفی برخی از شاخص‌های ساختار مکانی، ساختار گونه‌های راش و بلوط در بخش گرازبن جنگل خیرود مورد بررسی قرار گرفت. شاخص‌های به‌کار رفته در این پژوهش عبارتند از شاخص زاویه یکنواخت، شاخص اختلاط گونه‌ای، شاخص ابعاد قطر برابر سینه و شاخص اختلاف قطر برابر سینه که به بررسی موقعیت مکانی، چیدمان گونه‌های مختلف و وضعیت قطری بین درختان همسایه می‌پردازند. به این منظور با استفاده از نرم‌افزار (ver.1.3) Crancod تعداد 2149 گروه ساختاری راش و 357 گروه ساختاری بلوط بررسی شد. میانگین شاخص‌های ذکر شده برای گونه راش به‌ترتیب برابر با 58/0، 27/0، 53/0 و 45/0 و برای گونه بلوط به‌ترتیب برابر با 57/0، 74/0، 56/0 و 37/0 محاسبه گردید. شاخص اختلاط گونه‌ای، به‌خوبی نشان‌دهنده اختلاف دو گونه راش و بلوط می‌باشد، در حالی‌که شاخص‌های دیگر دارای ارزش‌هایی تقریباً یکسان می‌باشند. همچنین به‌منظور کمی‌سازی اختلاف ساختار بین دو گونه راش و بلوط از الگوریتم اختلاف مطلق استفاده گردید؛ که مقدار آن برای شاخص‌های یاد شده به‌ترتیب برابر با 8/8، 3/59، 2/6 و 2/19 درصد محاسبه شد. به‌علت توانایی این شاخص‌ها در نشان دادن تغییرات ساختار یک توده در طی زمان‌های مختلف و همچنین امکان مقایسه آن با توده‌های دیگر می‌توان از این شاخص‌ها به‌عنوان یک ابزار مناسب برای مدیریت پایدار استفاده کرد.}, keywords_fa = {: تنوع زیستی,ساختار مکانی,موقعیت مکانی,اختلاط گونه‌ای,ابعاد قطری}, url = {https://jwfst.gau.ac.ir/article_1015.html}, eprint = {https://jwfst.gau.ac.ir/article_1015_1ec1413b2b7c57e527dffdf0a6ce3538.pdf} } @article { author = {}, title = {Identification and pathogenicity of Fusarium oxysporum causal agent of wilt seedling Chestnut-leaved oak (Quercus castaneifolia) in Golestan province}, journal = {Journal of Wood and Forest Science and Technology}, volume = {19}, number = {3}, pages = {189-200}, year = {2013}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Chestnut-leaved oak (Quercus castaneifolia) is the most important species that its regeneration is limited by several problems such us pests and the fungal diseases. In order to isolate and identify the fungi associated with oak seed and pathogenicity of certain fungi on seedling, sampling carried out during 2007 in Loveh forest and Golestan park of Golestan province. Collected seeds then surface sterilized with 0.5% hypochlorite, each section of seed tissue cultured on potato dextrose agar media. After sub-culture and providing of the fungi pure cultures, Fusarium oxysporum isolated and identified by spores characteristics, their size and color with 28, 16, 56, 40 frequency percentages in Loveh forest and 20, 12, 12, 32 frequency percentages in Golestan park. The frequency percent of the fungi in Loveh forest (35) is the higher than Golestan park (19). pathogenicity test, was performed by inoculation of spore suspension (2×106) on collar. The re-isolation of test fungi was attempted after 6 weeks, using PDA. The sections were taken from roots near the stem base. Symptom of disease was including spot wilting on leave and rot root seedling. After the re-isolation, F. oxysporum was identification that is indication this fungi is pathogen on seedling oak.}, keywords = {}, title_fa = {شناسایی و بیماری‌زایی گونه Fusarium oxysporum عامل پژمردگی نهال‌های بلندمازو در منطقه استان گلستان}, abstract_fa = {بلندمازو از گونه‌هایی است که زادآوری طبیعی آن به‌دلیل وجود آفات و بیماری‌های مختلفی از جمله قارچ‌ها، با مشکلات فراوانی مواجه است. به‌منظور جداسازی و شناسایی یکی از قارچ‌های همراه بذر عامل پژمردگی‌ و اثبات بیماری‌زایی آن بر روی نهال‌های بلندمازو، در سال 1386 از دو منطقه جنگلی در استان گلستان (جنگل تحقیقاتی لوه و پارک جنگلی گلستان) نمونه‌برداری صورت گرفت. بذرهای جمع‌آوری شده پس از ضدعفونی سطحی با هیپوکلریت سدیم 5/0 درصد، در 4 تکرار روی محیط کشت غذایی سیب‌زمینی- دکستروز- آگار (PDA) کشت گردید (در هر تکرار 25 بذر). با استفاده از خالص‌سازی و خصوصیات اسپور، اندازه و رنگ آن‌ها، قارچ Fusarium oxysporum از روی بذرهای بلندمازو جداسازی و شناسایی شد. فراوانی این قارچ در جنگل تحقیقاتی لوه درصد فراوانی 35 درصد و در پارک جنگلی گلستان درصد فراوانی 19 درصد به‌طور متوسط در هر نمونه به‌دست آمد که این فراوانی در منطقه اول بیش‌تر از منطقه دوم بود. برای انجام آزمون بیماری‌زایی از پرگنه‌ قارچ سوسپانسیون اسپوری با غلظت 106×2 اسپور در هر میلی‌لیتر تهیه شد و اطراف طوقه هر نهال تازه جوانه زده اضافه گردید. سپس اندام‌های نهال بیمار شده مانند ریشه و طوقه بعد از 6 هفته بر روی محیط کشت غذایی PDA قرار داده شد. علایم بیماری بر روی نهال شامل لکه‌های کوچک پژمردگی بر روی برگ‌ها و پوسیدگی ریشه نهال بود. پس از قرار دادن قطعات کوچکی از بافت ریشه بر روی محیط کشت‌های عمومی و اختصاصی، همان گونه فوزاریوم جداسازی شده از روی بذر (Fusarium oxysporum) جدا گردید که نشان‌دهنده بیمارگر بودن این قارچ بر روی نهال‌های بلوط می‌باشد.}, keywords_fa = {Fusarium oxysporum,بذر,نهال بلندمازو,استان گلستان}, url = {https://jwfst.gau.ac.ir/article_1016.html}, eprint = {https://jwfst.gau.ac.ir/article_1016_319dee23f77323515eed95785a46e0de.pdf} }