@article { author = {m, e and r, h and m, k}, title = {Effect of Precipitated Calcium carbonate (PCC) on paper properties with CMP-Long Fiber furnish}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {1-18}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {AbstractThis study was carried out with this target to investigate the effect of using precipitated calcium carbonate (PCC) mineral filler on properties of printing and writing paper. PCC mineral filler in 20%, 30%, and 40% levels was added to the fiber suspension prepared by mixing Wood-Free pulp with CMP pulp (30:70 ratio), in order to improve the optical properties and also diminish the used fiber amount which is more expensive and costly constituent part of paper. In order to improvement in filler retention in paper, high molecular weight and high charge density cationic polyacrylamide (C-PAM) polymer also was used as retention-aids. Results indicated that optical properties of prepared handsheet papers were improved by increment in filler amount in paper, but on the other hand the other strength indices reduced, except tear index which approximately remained without change.}, keywords = {Mineral filler,Precipitated Calcium Carbonate,paper properties,polyacrylamide}, title_fa = {بررسی تاثیر استفاده از کربنات کلسیم رسوبی (PCC) بر ویژگی‌های کاغذ با فرنیش CMP و الیاف‌بلند}, abstract_fa = {چکیدهاین پژوهش با هدف بررسی تاثیر استفاده از پرکننده معدنی کربنات کلسیم رسوبی (PCC) بر ویژگی‌های کاغذ چاپ و تحریر انجام شد. پرکننده‌ معدنی PCC در سطوح 20، 30 و 40 درصد به منظور بهبود ویژگی‌های نوری کاغذ و نیز کاهش مقدار الیاف مورد استفاده در ساخت کاغذ که بخش گران‌قیمت و پرهزینه تشکیل‌دهنده‌ کاغذ هستند، به سوسپانسیون الیاف حاصل از 30 درصد خمیرکاغذ الیاف‌بلند وارداتی و 70 درصد خمیرکاغذ شیمیایی-مکانیکی (CMP) افزوده شد. همچنین به منظور بهبود ماندگاری میزان پرکننده موجود در کاغذ، از پلیمر پلی‌آکریل‌آمیدکاتیونی (C-PAM) با وزن مولکولی زیاد و چگالی بار زیاد به عنوان عامل کمک‌نگهدارنده استفاده شد. نتایج نشان داد با افزایش پرکننده موجود در کاغذ، ویژگی‌های نوری کاغذهای دست‌ساز تهیه‌شده بهبود یافتند، اما از سوی دیگر به استثنای مقاومت به پارگی که تقریبا بدون تغییر باقی ماند، مقادیر شاخص ‌های سایر‌ مقاومت‌های مکانیکی کاهش نشان داد.}, keywords_fa = {پرکننده معدنی,کربنات کلسیم رسوبی,ویژگی‌های کاغذ,پلی‌ا‌‌کریل‌آمید کاتیونی}, url = {https://jwfst.gau.ac.ir/article_2430.html}, eprint = {https://jwfst.gau.ac.ir/article_2430_7e752109f02f93f9f2f9fe028ec30893.pdf} } @article { author = {Talebi, Manije and مجنونیان, باریس and Abdie, Ehsan and Elahian, Mohamad Razi}, title = {Quantitative and qualitative assessment of road construction standards in Arasbaran region}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {19-34}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {AbstractForest roads are as essential infrastructure and prerequisite in management of forested areas. Sustainable management of roads depends on regular and timely forest road maintenance. Road inventory is the first step in forest road management, control of construction standards and maintenance operation. The purpose of this study was to assess existing roads standards by road inventory and using the results to schedule maintenance operation. To do this a part of the road network from Kaleibarchay watershed in Arasbaran region was inventoried, and cross sectional components were measured and compared to standard ones. Culverts and bridges along the road were also investigated. Road components, problems of surfacing and slope stability were analyzed quantitative and qualitatively. The results showed that there were significant differences between existing parameters and standard ones and the exceptions were side ditch depth and roadbed. The results of culverts and bridges assessment showed that the road segment only had one culvert. According to the results cross-slope has the highest consistency with standard values. 25.19% of the road length was without any sign of surfacing problems. Among surfacing problems rutting has the highest abundance and cut slope had more stability problems than fill slope. The results of this research can be used in maintenance operation for studied road and also as a model to study and collect required inventory data.}, keywords = {construction standards,Arasbaran region,Forest roads,road inventory,ArcGIS}, title_fa = {بررسی کمی و کیفی استاندارد‏های ساخت جاده‏های جنگلی منطقه ارسباران}, abstract_fa = {چکیدهجاده‌های جنگلی از ضروری‌ترین زیرساخت‌ها در مدیریت واحد‌های جنگلی محسوب می‌شوند که تضمین عملکرد پایدار آن‌ها نیازمند پایش و نگهداری منظم شبکه جاده‌های جنگلی می‌باشد. آماربرداری جاده اولین گام در مدیریت جاده‌های جنگلی، بررسی و کنترل رعایت استانداردهای ساخت و نگهداری اصولی آن می‌باشد. هدف از انجام این پژوهش بررسی استاندارد جاده‌های موجود از طریق آماربرداری به منظور برنامه‌ریزی بهینه مدیریت نگهداری و بازسازی جاده‌های موجود می‌باشد. به این منظور بخشی از شبکه جاده حوزه کلیبر‌چای منطقه ارسباران آماربرداری و متغیرهای نیمرخ عرضی و آبروها و پل‌های موجود برداشت و با مقادیر استاندارد مقایسه شدند. اجزای جاده و اشکالات روسازی و ترانشه‌ها به صورت کمی و کیفی تجزیه و تحلیل شدند. نتایج مقایسه با مقادیر استاندارد نشان داد، به جز در مورد عمق جوی و عرض بستر که اختلافی بین جاده‌های موجود و میزان استاندارد وجود ندارد، در دیگر موارد همه اختلاف‌ها معنی‌دار می‌باشد. نتایج بررسی آبروها و پل‌های مسیر جاده تنها وجود یک آبرو را نشان داد. شیب عرضی نسبت به بقیه اجزا بیشترین درصد تطابق با استاندارد را دارا می‌باشد. 19/25 درصد مسیر جاده بدون اشکالات روسازی می‌باشد و در این میان شیار بیشترین فراوانی ایراد را شامل می‌شود. ترانشه خاکبرداری نسبت به ترانشه خاکریزی بیشترین میزان اشکال را دارا می‌باشد. نتایج این پژوهش می‌تواند در مدیریت بهینه نگهداری و بازسازی جاده‌های منطقه مورد مطالعه مؤثر و در نهایت به عنوان الگوی پایش جاده‌های منطقه مورد استفاده قرار گیرد.}, keywords_fa = {استانداردهای ساخت,منطقه ارسباران,جاده‌های جنگلی,آماربرداری جاده,ArcGIS}, url = {https://jwfst.gau.ac.ir/article_2438.html}, eprint = {https://jwfst.gau.ac.ir/article_2438_e5be3ce9dbab9bd9de91409d5ee40186.pdf} } @article { author = {Moradian, Mohammad Hadi and Resalati, Hossein and Ebrahimi, Ghanbar}, title = {Prediction of newsprint properties from stock preparation variables case study in Mazandaran Wood and Paper Industries}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {35-54}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Pulp and paper industries have provided great research opportunities to control systems, using different kinds of models. The objective of this study was to investigate the relationships between 56 process variables of stock preparation, and 17 newsprint quality properties in Mazandaran Wood and Paper Industries (MWPI) and to develop predictive models. After preparation of suitable data series considering the time needed for pulp to paper, the relations between process dependent and newsprint independent variables were determined using partial least square regression (PLS). In result, 8 calculated latent vectors could categorize and relate variables and determine more than 60 percent of newsprint properties changes. The first vector as the most important factor, determined changes of 7 newsprint properties including; Caliper, Bulk, Breaking Length MD, Elongation MD, Burst, Opacity and Air Resistance from some of stock preparation variables including; stock pressure in the third group cleaners, rush to drug speed, stock save-all flow, output of second fan pump, head-box slice opening degree, white water chamber valve. The majority of these process variables influence on fibers bonding quality in newsprint paper.}, keywords = {Newsprint,Statistical model,PLS regression,Stock preparation variables}, title_fa = {پیش‌بینی ویژیگی‌های کاغذ روزنامه از روی متغیرهای آماده‌سازی خمیرکاغذ (مطالعه موردی) کارخانه چوب و کاغذ مازندران}, abstract_fa = {ویژگی‌های صنعت خمیر و کاغذ فرصتهای تحقیقاتی مهمی‌ را برای کنترل سیستم‌ها با به‌کارگیری انواع مدل‌ها فراهم کرده است. این تحقیق با هدف بررسی روابط میان 56 متغیر فرایندی تهیه خمیرکاغذ آماده و 17 ویژگی کیفی کاغذ روزنامه ساخته شده در کارخانه چوب و کاغذ مازندران و تهیه مدل‌های پیش‌بینی انجام گرفت. پس از تهیه سری داده مناسب با در نظر گرفتن زمان لازم برای تبدیل این خمیر به کاغذ روزنامه، روابط این متغیرهای مستقل با متغیرهای ویژگی‌های کاغذ روزنامه با روش رگرسیون حداقل مربعات جزیی (PLS) تعیین گردید که در نتیجة آن 8 بردار مخفی محاسبه شده توانستند متغیرهای مرتبط را مشخص و گروه‌بندی کرده و بیش از 60 درصد از تغییرات ویژگی‌های کاغذ روزنامه را تبیین کنند. بردار اول به عنوان مهم‌ترین فاکتور توانست تغییرات 7 ویژگی کاغذ روزنامه شامل ضخامت، حجیمی، طول پارگی MD، افزایش طول MD، مقاومت به ترکیدن، ماتی، و مقاومت به عبور هوا را توسط متغیرهای فرایندی فشار تمیزکننده‌های گروه سوم، نسبت سرعت جت به توری، دبی خمیر سیوآل، خروجی فن پمپ دو، میزان باز بودن دهانة جعبه‌تغذیه و شیر مخزن آب سفید توضیح دهد که تأثیر اکثر این متغیرها بر کیفیت اتصالات الیاف در کاغذ روزنامه می‌باشد.}, keywords_fa = {کاغذ روزنامه,مدل آماری,رگرسیون حد اقل مربعات جزیی,متغیرهای تهیه خمیرکاغذ آماده}, url = {https://jwfst.gau.ac.ir/article_2431.html}, eprint = {https://jwfst.gau.ac.ir/article_2431_11bdd48f37d2a66588cb14aea5dcfceb.pdf} } @article { author = {kordalivand, amir and پیام نور, وحیده and Sattarian, Ali and محمدی, جهانگیر}, title = {Different types of leaf stomata Birch (Betula spp.) In the northern forests of Iran}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {55-74}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Different stomata types and their position with epidermal cells in genus Betula spp were studied at the three sites (Siahmarzkoo, Sangdeh and Shahrestanak), by scanning light and electronic microscopy. Ten trees were selected with minimum 100 meters distance from each other. Significant differences in nested layout analysis were calculated between large and small stomata length, large stomata width, its area and no significant differences between small stomata width and densities in different populations. The highest and lowest stomata area related to Siahmarzkoo and Sangde. Correlation between stomata traits and geographical habitat characteristics showed that length, width and area of the stomata decrease by increasing height above sea level and will increase by increasing latitude and longitude. Detection analysis showed a 70 percent match between stomata characteristics and ecological conditions of the habitats. Two types of stomata including paracytic and anomocytic were identified in this genus with paracytic dominant. One similar type of stomata was recognized for three sites in terms of position of stomata in comparison with epidermal cells and in this type, stomata located over than epidermal cells.}, keywords = {Discriminate analysis,Birch,stomata type,Area of stomata}, title_fa = {تیپ‌های مختلف روزنه برگ توس (Betula spp.) در جنگل‌های شمال کشور}, abstract_fa = {پژوهش پیش رو به منظور شناسایی تیپ‌های مختلف روزنه و تعیین موقعیت قرارگیری آن نسبت به سلول‌های اپیدرم در جنس توس (Betula spp.) در سه رویشگاه کوهستانی شامل سیاه مرزکوه، سنگده و شهرستانک با استفاده از میکروسکوپ الکترونی و نوری انجام شد. از هر رویشگاه 10 پایه درختی با رعایت فاصله حداقل 100 متری از یکدیگر برای انجام این پژوهش در نظر گرفته شد. نتایج آنالیز طرح آشیانه‌ای، حاکی از تفاوت های معنی دار بین جمعیت‌های مختلف از نظر صفات طول بزرگ و کوچک روزنه، عرض بزرگ روزنه و مساحت روزنه و عدم معنی‌داری در صفات عرض کوچک روزنه و تراکم روزنه است. بیشترین و کمترین میزان مساحت روزنه به ترتیب مربوط به جمعیت سیاه مرزکوه و سنگده بود. بررسی همبستگی بین صفات روزنه با مشخصات جغرافیایی رویشگاه نشان داد، که با افزایش ارتفاع از سطح دریا، طول، عرض و مساحت روزنه کاهش و با افزایش طول و عرض جغرافیایی، طول، عرض و مساحت روزنه افزایش می‌یابد. نتایج آنالیز تشخیص حاکی از مطابقت 70 درصدی بین خصوصیات روزنه با شرایط اکولوژیکی رویشگاه بود. دو تیپ روزنه شامل آنموستیک و پاراستیک برای جنس توس شناسایی شدند، که تیپ پاراستیک تیپ غالب در این جنس بود. از نظر موقعیت قرارگیری روزنه نسبت به سلول همراه، یک تیپ مشابه برای سه رویشگاه شناسایی گردید که در این تیپ روزنه بالاتر از سلول‌های اپیدرم قرار گرفته است.}, keywords_fa = {آنالیز تشخیص,توس,تیپ روزنه,مساحت روزنه}, url = {https://jwfst.gau.ac.ir/article_2432.html}, eprint = {https://jwfst.gau.ac.ir/article_2432_61ad89daf55f663b4cb2a86983322411.pdf} } @article { author = {اسدپور اتوئی, قاسم and رسالتی, حسین and دهقانی, محمدرضا and قاسمیان, علی and محمدنژاد, موسی}, title = {comparison of polymeric retiontion aid systems}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {75-94}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this research , the effect of dual retention system , poly ethylene imin plus anionic poly acryl amid and in three level of these chemical consumption(low, medium and high) on pulp drainage , filler retention and also newsprint hand sheet structural, strength and optical properties was investigated and was compared with control samples(the samples that used single retention aid system, cationic poly acryl amid). The results showed that in comparison with control samples, the applying of dual retention system, have significant effects on newsprint pulp and paper properties and the positive or negative effects of dual retention system depends on level of chemical consumption.}, keywords = {newsprint papers,Dual retention system,strength properties,formation}, title_fa = {مقایسه بکارگیری سیستم دوترکیبی موادکمک نگهدارنده پلی اکریل آمید آنیونی و پلی اتیلن ایمین با سیستم یک ترکیبی پلی اکریل آمید کاتیونی در بهبود خواص خمیر وکاغذ روزنامه}, abstract_fa = {در این پژوهش تاثیر استفاده از سیستم ماندگاری دو ترکیبی پلی اتیلن ایمین و پلی اکریل آمید آنیونی و در سه سطح مصرف کم،متوسط و زیاد بر روی ویژگی آبگیری خمیر ، مقادیر ماندگاری مواد پرکننده و نیز ویژگیهای ساختاری، مقاومتی و نوری کاغذ روزنامه دست ساخت بررسی و با نمونه های شاهد یعنی سیستم یک ترکیبی ماندگاری (پلی اکریل آمید کاتیونی) موردمقایسه قرار گرفت. با توجه به نتایج و در مقایسه با سیستم یک ترکیبی پلی اکریل آمیدکاتیونی ، بکارگیری سیستم کمک نگهدارنده دو ترکیبی پلی اتیلن ایمین به اضافه پلی اکریل آمید آنیونی، تاثیر کاملا معنی داری برخواص خمیر وکاغذ روزنامه داشته و تاثیرات مثبت یا منفی بکارگیری این مواد کمک نگهدارنده دوترکیبی، بستگی به سطوح مصرف آن دارد.}, keywords_fa = {کاغذروزنامه,سیستم ماندگاری دو ترکیبی,ویژگیهای مقاومتی,شکل گیری}, url = {https://jwfst.gau.ac.ir/article_2436.html}, eprint = {https://jwfst.gau.ac.ir/article_2436_6c906eb45f80ecf462f4377d08059d3d.pdf} } @article { author = {Tavankar, Farzam and Bonyad, Amir Eslam}, title = {Snow damages in related to physiographic factors in Asalem-Nav forests, Guilan province}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {95-118}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Snow damage is a significant and serious problem in management of mountain forests. In this research snow damage on trees in related to physiographic factors were studied in Asalem-Nav mountain forests in the Guilan province. The ground slope of study area was divided in tow slope classes: lower and upper than 50 percent. The frequency of damaged trees in lower and upper than 50 percent of ground slopes was 10.5 and 18.2 percent. The results showed that the frequencies of damaged trees have significantly differences in two ground slope classes (P < 0.001). The frequencies of tree damage types of crown damage, stem breakage and uprooting in the slopes of upper than 50 percent was higher than slopes of lower than 50 percent. The trees on the northern aspect slopes were more damaged than southern aspect slopes, so frequency of damaged trees on northern aspect slopes was 17.6 percent but on the southern aspect slopes was 10.3 percent. The trees of Beach, Hornbeam, Great maple and Cappadocian maple in northern aspect slopes, while the trees of Alder and Oak in the southern aspect slopes have more susceptible to snow damage. In order to strengthening of trees against to the snow damage needs to adequate silvicultural operation in mountain forests.}, keywords = {Snow damage,ground slope,Silviculture,Asalem Nav forest}, title_fa = {بررسی میزان خسارت برف ناشی از خصوصیات فیزیوگرافی در جنگل‌های ناو اسالم، استان گیلان}, abstract_fa = {خسارت برف یکی از مشکلات مهم و متوالی در مدیریت جنگل‌های کوهستانی است. در این تحقیق خسارت برف بر درختان در ارتباط با عوامل فیزیوگرافی در جنگل‌های کوهستانی ناو اسالم در استان گیلان مورد بررسی قرار گرفت. شیب منطقۀ مورد مطالعه به دو کلاس کم‌تر از 50 درصد و بالاتر از 50 درصد تقسیم شدند. فراوانی درختان خسارت دیده در شب‌های کم‌تر از 50 درصد 5/10 درصد و در شیب‌های بالاتر از 50 درصد 2/18 درصد بود. نتایج نشان داد، فراوانی خسارت برف بر درختان در دو کلاسه شیب زمین اختلاف معنی‌داری دارند (001/0 > P). خسارت برف به انواع صدمه تاجی، شکستگی تنه و ریشه‌کن شدن درختان در شیب‌های بالای 50 درصد بیش‌تر از شیب‌های کلاسه کم‌تر از 50 درصد بودند. درختان واقع در جهت‌ شمالی خسارت بیش‌تری نسبت به درختان واقع در جهت‌ جنوبی دیده بودند، به طوری که فراوانی درختان خسارت دیده در جهت‌ شمالی 6/17 درصد، اما در جهت‌ جنوبی 3/10 درصد بودند. درختان راش، ممرز، پلت و شیردار در جهت‌ شمالی و درختان بلوط و توسکا در جهت‌ جنوبی در مقابل خسارت برف حساسیت بیش‌تری داشتند. به منظور مقاوم سازی توده‌ها در برابر خسارات برف نیاز به اجرای عملیات جنگل‌شناسی مناسب در جنگل‌های کوهستانی است.}, keywords_fa = {خسارت برف,شیب زمین,جگل‌شناسی,ناو اسالم}, url = {https://jwfst.gau.ac.ir/article_2434.html}, eprint = {https://jwfst.gau.ac.ir/article_2434_1e1afd58247d6c1f61883de3b007e4e4.pdf} } @article { author = {افرا, الیاس and Mohammadi, Maryam and Imani, Reza and narchin, parvaneh}, title = {Improvement of the antibacterial properties of sanitary papers using by silver nano particles}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {119-136}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this study silver nano particles was used to improve the antibacterial properties of paper. This material was used at two levels of concentration (25 ppm and 100 ppm in pulp suspension). All hand-sheet’s antibacterial properties were evaluated using the OD method. In this method Escherichia coli bacteria and Bacillus subtilis bacteria were used that theses tow bacteria are representative of Gram-positive and Gram-negative bacteria respectively. Results have shown that nano silver particles at the same consumption levels had a larger reduction in growth of E. coli in comparison to Bacillus. Also, all concentration levels of nano silver reduced the growth of both bacteria, but low consumption value of nano silver (ppm 25) reduced the growth of both bacteria significantly that is very important in terms of its safety and health. Finally, according to the results, the use of nano silver didn’t show conventional negative effects of additives and fillers on reducing of some physical, mechanical and optical properties.}, keywords = {nano silver,Anti-bacterial properties,escherichia coli,Bacillus subtilis}, title_fa = {بهبود خواص آنتی باکتریال کاغذهای بهداشتی با استفاده از ذرات نانو نقره}, abstract_fa = {در این تحقیق به‌منظور بهبود خواص ضد‌باکتریایی از نانوذرات نقره شفاف استفاده شد. این ماده در دو سطح غلظتppm 25 و ppm100 در خمیر کاغذ استفاده گردید. پس از تولید کاغذ دست‌ساز، از نمونه شاهد و نمونه تیمار شده خواص ضدباکتریایی کاغذها با استفاده از روش OD (بررسی عدد جذب محیط کشت باکتری به‌وسیله دستگاه کدورت‌سنج) ارزیابی گردید. بدین منظور خاصیت ضد‌باکتریایی کاغذها به‌وسیله دو نوع باکتری اشرشیاکلی و باسیلوس سوبتیلیس که به ترتیب نماینده باکتری‌های گرم منفی و گرم مثبت هستند مورد بررسی قرار گرفت. نتایج نشان داده است که ذرات نانونقره در سطوح مصرف برابر، رشد باکتری اشرشیا‌کلی را در مقایسه با باکتری باسیلوس به مقدار بیشتری کاهش داده است. از طرفی در مقادیر مصرف بسیار کمتر نانونقره (ppm 25) میزان رشد هردو باکتری به میزان قابل توجهی در مقایسه با مقدار مصرف ppm 100 کاهش یافته است که از لحاظ جنبه‌های ایمنی و سلامتی بسیار حائز اهمیت می‌باشد. در نهایت بر اساس نتایج به دست آمده به کارگیری نانو نقره، اثرات منفی متداول برخی افزودنی‌ها و پرکننده‌ها در افت ویژگی‌های فیزیکی، مکانیکی و نوری را از خود نشان نداده است.}, keywords_fa = {نانو نقره,خواص ضدباکتریایی,اشرشیا کلی,باسیلوس}, url = {https://jwfst.gau.ac.ir/article_2440.html}, eprint = {https://jwfst.gau.ac.ir/article_2440_9236f34cf930b1a1311bff19208ffd1c.pdf} } @article { author = {Sohrabi, Hormoz and دریایی, اردلان}, title = {Aboveground biomass estimation of small diameter trees of Carpinus betulus, Fagus orientalis and Parrotio persica using power regression model}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {137-150}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Today, measurement of the forest biomass is important from different aspects. The biomass estimation of small diameter trees as missing part of measurements is significant. The main objective of this study is to develop allometric equations for estimating the stem, branches, leaf, bark and total biomass of small diameter trees including Carpinus betulus, Fagus orientalis and Parrotio persica. To achieve this purpose, 10 intact trees from each species that have 2-8 cm diameter were randomly selected and collar diameter, diameter at breast height, diameter where crown started, crown diameter and height were measeured. Then trees were felled down and different parts were weighted. One sample from each part was transferred to lab and percent of dry weight was calculated. The most appropriate equations for estimating different parts of the trees biomass were selected by using power regression model. The results show that among the variables, diameter at breast height is the most appropriate estimator for estimating woody parts biomass of small diameter trees in all three species and equations can be produced by heigh R2. But, regression models for non-woody parts of small diameter trees can not be produced by sufficient accuracy.}, keywords = {Biomass,Small diameter trees,Carpinus betulus,Fagus orientalis,Parrotio persica}, title_fa = {برآورد زیتوده روی زمین درختان کم قطر ممرز، راش و انجیلی با استفاده از مدل رگرسیون توانی}, abstract_fa = {امروزه اندازه‌گیری زیتوده درختان جنگلی از جنبه‌های گوناگون مورد توجه است و در این میان برآورد زیتوده درختان کم‌قطر به عنوان بخش فراموش شده در اندازه‌گیری‌ها دارای اهمیت است. هدف این تحقیق توسعه مدل‌های رگرسیون توانی برای برآورد زیتوده ساقه، شاخه، برگ، پوست و کل در درختان کم قطر گونه‌های ممرز، راش و انجیلی است. به این منظور 9 پایه سالم از هر گونه با قطر برابر سینه 2 تا 8 سانتی‌متر به طور تصادفی انتخاب و قطر یقه، قطر در ارتفاع برابر سینه، قطر در ارتفاع شروع تاج، قطر تاج و ارتفاع اندازه‌گیری شد. سپس درختان قطع شده و وزن تر بخش‌های مختلف اندازه گیری شد. از هر بخش نمونه‌ای به آزمایشگاه منتقل و درصد وزن خشک به دست آمد. با استفاده از تحلیل رگرسیون توانی مناسب-ترین معادلات برای برآورد زیتوده بخش‌های مختلف درختان انتخاب شدند. نتایج نشان داد که از بین متغیرهای مستقل، قطر برابر سینه مناسب‌ترین برآوردکننده زیتوده برای بخش‌های چوبی درختان کم‌قطر است و با استفاده از آن می‌توان معادلاتی با ضریب تبیین بالا تولید نمود. اما ارائه مدل‌های رگرسیونی برای اندام‌های غیر چوبی درختان کم‌قطر با دقت مناسب ممکن نیست.}, keywords_fa = {زیتوده,درختان کم قطر,ممرز,راش,انجیلی}, url = {https://jwfst.gau.ac.ir/article_2439.html}, eprint = {https://jwfst.gau.ac.ir/article_2439_70459efc43d98de2058a0ba76eac3182.pdf} } @article { author = {محسنی توکلی, صبرینه and رسالتی, حسین and افرا, الیاس and ایمانی, رضا and Liimatainen, Henrikki}, title = {Evaluating the Effects of Chitosan-Nanocellulose Layer-by-Layer Nanocoating on the Cotton Linter Fibers and the Paper Properties}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {151-170}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Layer-by-Layer self-assembly technique is a novel method in nanothechnology for the modification of the surface properties of solid materials.This paper compares the influence of modification of cotton linter fibers external surfaces via alternate adsorption of positive and negative(chitosan/Cellulose nanofibers) polyelectrolytes. The adsorption of materials on cellulose fibers was analyzed via polyelectrolyte titration. The bonding ability of fibers was improved by polyelectrolyte multilayering(PEM) on the fiber surface visualized using Field-Emission Scanning Electron Microscopy(FESEM).The results showed that apparent density and also bonding ability were significantly improved at second layer, whereas the apparent density and tensile index of the sheet increased by 10% and 76% respectively compared to those of untreated fibers at second layer.}, keywords = {Layer-by-layer technique,Cotton linter,Chitosan,Nanocellulose,Tensile index}, title_fa = {ارزیابی تاثیرنانوکوتینگ لایه ای کایتوزان- نانوالیاف سلولزی بر ویژگی های الیاف و کاغذ لینتر پنبه}, abstract_fa = {روش خودتجمعی لایه به لایه، در حوزه فناوری نانو، از روش‌های جدیدی است که برای اصلاح خواص سطح مواد جامد استفاده می‌شود. در این مقاله تاثیر اصلاح سطح خارجی الیاف لینتر پنبه با جذب متناوب لایه هایپلی الکترولیت کاتیونی و آنیونی (کایتوزان/ نانوالیاف سلولزی) بررسی گردید.جذب مواد بر سطح الیاف سلولزی از طریق تیتراسیون الکترولیت تحلیل شد.قابلیت پیوند پذیری الیاف با تشکیل لایه‌های پلیمری در سطح الیاف، بهبود یافته که تغییرات حاصله در سطوح الیاف با استفاده ازتصویربرداری الیاف با میکروسکوپ الکترونی روبشی گسیل میدانی(FESEM) ارزیابی شد. نتایج نشان داد که قابلیت پیوندپذیری الیاف در لایه دوم لایه‌نشانی بهبود چشمگیری یافت. به علاوه، چگالی ظاهری و شاخص کشش در کاغذ حاصله به ترتیب 10% و 76% نسبت به خمیر شاهد افزایش نشان داد.}, keywords_fa = {روش لایه به لایه,لینتر پنبه,نانوسلولز,کایتوزان,شاخص کشش}, url = {https://jwfst.gau.ac.ir/article_2433.html}, eprint = {https://jwfst.gau.ac.ir/article_2433_bc14b85989982eba03c1b03b9675d048.pdf} } @article { author = {یلمه, غفار and معیری, محمد هادی and کیان, سعید and محمدی, جهانگیر and محمد علی پور ملکشاه, علی اکبر}, title = {Evaluation of renewal volume methods of 3p and one hundred percent for hornbeam species. (Case study: District one of Shast-kolate Forestry Plan)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {171-188}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Accuracy in volume estimation of industrial as well as firewood of cut trees, which are the base of stumpage and toll collection calculation, is very important in forestry plans. This investigation aims to evaluate the 3P and traditional renewal methods of hornbeam trees in comparison to the actual volume of cut hornbeam trees in Bahram- Nia Forestry Plan. Therefore, 282 trees of hornbeam species were selected from official cut permission of the year 2011 of the mentioned forestry plan. At first the volume of selected trees were calculated using the traditional hundred percent volume renewal methods. Then the actual industrial wood, firewood and total volume of all hornbeam trees was calculated according to the 3P prescription. Volume estimation of hornbeam trees was done through 3P volume renewal method (in 5 replications). The results of these two methods were compared to the actual volume of cut trees. The results showed that there was a significant difference between the industrial wood, firewood and total volume in traditional method with the actual tree volume. Under estimation of industrial wood volume was due to Indiscrimination of decayed parts of trees, and over estimation firewood volume was due to calculating it according to difference of total tree volume (volume table) and industrial volume. Consequently, over estimation of total tree volume in traditional method was happen relatively. The difference of estimated volume between 3P method with the actual cut trees volume was 0.4 to 6.3 percent that is not statistically significant. Generally the total volume calculated by 3P method was less than (23.1 to 30 percent) the total volume calculated by traditional method. Regarding to the result of this study, the 3P method is suggested for volume renewal of cut trees in reclamation areas due to higher accuracy,to the traditional hundred percent method.}, keywords = {Volume renewal,Traditional method,3P method,Forestry plan}, title_fa = {ارزیابی روش های تجدید حجم 3P وسنتی صددرصد گونه ممرز (مطالعه موردی: سری یک طرح جنگلداری شصت کلاته)}, abstract_fa = {دقت در محاسبه و برآورد حجم صنعتی و هیزمی درختان قطع شده در طرحهای جنگلداری که مبنای اخذ عوارض و بهره مالکانه میباشد دارای اهمیت بسزایی میباشد. این تحقیق درصدد است روشهای متداول تجدیدحجم درختان شامل روش سنتی صددرصد و روش 3P را در مقایسه با حجم واقعی درختان ممرز قطع شده در طرح جنگلداری دکتربهرام نیا ارزیابی نماید. بدین منظور 282 اصله درخت ممرز انتخاب گردید. درختان ابتدا به روش تجدیدحجم سنتی صددرصد اندازه گیری شدند، سپس حجم واقعی تمام درختان ممرز به تفکیک صنعتی، هیزمی و کل بر اساس دستورالعمل ابلاغی شیوه تجدیدحجم به روش 3P آماده سازی و اندازه گیری و بطور دقیق محاسبه و مبنای مقایسه روشهای مورد مطالعه قرار گرفت. برآورد حجم درختان ممرز از طریق تجدیدحجم به روش 3P (در5 تکرار) نیز انجام شد. نتایج دو روش تجدید حجم سنتی و3P با حجم واقعی درختان قطع شده مقایسه گردید. نتایج نشان داد حجم های صنعتی، هیزمی و کل درخت ممرز در روش سنتی صددرصد با حجم واقعی درختان(در سطح احتمال 95 درصد) اختلاف معنی داری دارد. محاسبه حجم صنعتی کمتر به دلیل عدم تشخیص و تعیین دقیق بخش های پوسیده و لاپی تنه درختان، و برآورد حجم هیزمی بیشتر به دلیل عدم اندازه گیری آن و درنتیجه حجم کل بیشتر دلیل این اختلاف حجم می باشد. اختلاف حجم برآورد شده به روش 3P در 5 تکرار با حجم واقعی درختان قطع شده 3/6 و4/0 درصد تعیین گردید که این اختلاف از نظر آماری معنی دار نمی باشد. حجم کل تجدیدحجم حاصل از روش3P همواره کمتر از حجم کل حاصل از روش سنتی صددرصد بوده و حداقل و حداکثر میزان کاهش 30 و1/23 درصد می باشد. با توجه به نتایج این تحقیق، روش نمونه گیری 3P به خاطر دقت بیشتر نسبت به روش صددرصد سنتی، برای تجدیدحجم درختان قطع شده مناطق احیایی پیشنهاد می گردد.}, keywords_fa = {تجدیدحجم,روش سنتی صددرصد,روش 3P,طرح جنگلداری}, url = {https://jwfst.gau.ac.ir/article_2435.html}, eprint = {https://jwfst.gau.ac.ir/article_2435_5d9c2d7dfd836ba507f4d995f8074c53.pdf} } @article { author = {روستایی, مریم and بهروز, ربیع and مهدوی, سعید}, title = {The Effect of Using Anthraquinone on Hornbeam Neutral Sulfite Pulp Properties}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {189-206}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {This research was performed with the aim of using anthraquinone (AQ) as catalyst in order to improve the properties of the pulp from Hornbeam, neutral sulfite semi chemical (NSSC) pulping. The pulping was carried out at three screen yield levels of 55, 60 and 65%. The cooking conditions were chosen as: temperature (175˚C), time (Variable), total chemicals 14% and anthraquinone 0.1% to achieve the screen yields. In all cooking trials, sodium sulfite to sodium bicarbonate weight ratio was constant equal to 4.5:1. The cooking liquor to wood ratio was 4 to1 respectively. The results indicated that anthraquinone decreased the cooking time (5 to 10 min.), pulp reject (1.8 to 0.3%), and kappa number (3 to 4 units) due to its selectivity. Also, all strength indices (including burst, tear, and tensile), RCT and CMT of the hand sheets were increased significantly (p≤ 0.05) by using anthraquinone. Regarding optical properties, the brightness of hand sheets with screen yield of 65, 60, and 55% were increased significantly 76.5, 47.5, and 16.4%, respectively by adding AQ in the cooking stage. Paper opacity dropped slightly, but the change was not significant.}, keywords = {hornbeam,NSSC,Anthraquinone}, title_fa = {اثر استفاده از آنتراکینون بر ویژگی‌های خمیرکاغذ سولفیت خنثی از گونه ممرز}, abstract_fa = {ههدف از این تحقیق بررسی اثر استفاده از کاتالیزور آنتراکینون بر ویژگی خمیرکاغذ‌ نیمه شیمیایی سولفیت خنثی (NSSC) گونه ممرز می‌باشد. خمیرکاغذسازی در سه سطح بازده 55، 60 و 65 درصد انجام شد. برای دست‌یابی به بازده‌ مورد نظر پخت از شرایط: درجه حرارت 175 درجه سانتی‌گراد، زمان (متغیر)، درصد مواد شیمیایی 14 درصد و آنتراکینون 1/0 درصد استفاده شد. در تمام پخت‌ها نسبت وزنی سولفیت سدیم به بی-کربنات سدیم 5/4 به 1 و نسبت مایع پخت به خرده‌چوب 4 به 1 در نظر گرفته شد. نتایج حاصل نشان داد که در بازده‌های مشابه، استفاده از آنتراکینون به دلیل گزینش‌پذیری، سبب کاهش زمان پخت (5 تا 10 دقیقه)، وازده (8/1 تا 3/0 درصد) و عدد کاپا (3 تا 4 واحد) شده است. خمیرکاغذهای تهیه شده با استفاده از آنتراکینون به انرژی پالایش کمتری نیاز داشتند. با افزودن آنتراکینون، شاخص‌های مقاومتی کاغذ (مقاومت به ترکیدن، پاره شدن، کشش، له شدگی حلقوی و له شدگی کنگره‌ای) افزایش یافت و این افزایش در سطح اعتماد آماری 95% معنی‌دار بود. در مورد خواص نوری کاغذ‌های دست‌ساز، نتایج حاکی از آن است که افزودن آنتراکینون باعث تغییر معنی‌دار درجه روشنی کاغذ شده است به طوری که میزان آن در بازده‌های 65، 60 و 55 درصد به ترتیب 5/76، 5/47 و 4/16 درصد ایزو افزایش داشته است. درجه ماتی کاغذها به میزان کمی کاهش یافته که این کاهش به لحاظ آماری معنی‌دار نبوده است.}, keywords_fa = {ممرز,فرآیند نیمه شیمیایی,آنتراکینون}, url = {https://jwfst.gau.ac.ir/article_2441.html}, eprint = {https://jwfst.gau.ac.ir/article_2441_d3e229b47da8438073263f84cf422c2e.pdf} } @article { author = {Jahdi, Roghayeh and درویش صفت, علی اصغر and اعتماد, وحید}, title = {Local Scale Fuel Type Mapping and Surface Fire Behavior Prediction Using FARSITE (Case study: Toshi Forest-Siahkal)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {22}, number = {2}, pages = {207-225}, year = {2015}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Iranian Northern forests have been subject to increased wildfire in recent years. The area and intensity of these fires is strongly dependent upon the type of fuels and its spatial variability across the Landscape. It is very important to develop accurate ways to assess fuel characteristics and predict the probability of fires occurring in heterogeneous landscapes for fire prevention and management. The objectives of this research were to build local scale fuel type map and simulate their fire behavior. The spatial extent of the different fuel types of Toshi forest in Siahkal characterized by heterogeneous vegetation and topography was determined using a field survey. Utilizing the spatial database capabilities of GIS, FARSITE fire area simulator was used to modeling potential wildfire spread and behavior. Four different fuel types (grass, grass-shrub, natural forest and plantation) of the study area were analyzed. The fuel types were developed by field sampling and the collected data was inserted in the FARSITE simulator. The simulation results revealed that the fuel type for the shrublands and natural forests demonstrated the longest flame length, the highest fireline intensity and the greatest heat release per unit area. The fuel type for the grass fields presented the fastest surface rate of spread; and the fuel type for the plantation the lower fire intensity. The fire behavior maps are an end product which can be fully exploited operationally from local fire management authorities without further processing for an effective wildfire management and proactive emergency response.}, keywords = {Fire Area Simulator,fire intensity,fire management,fuel type,wildfire spread and behavior}, title_fa = {تهیه نقشه تیپ‌ ماده سوختنی در مقیاس محلی و پیش‌بینی رفتار آتش سطحی با استفاده از FARSITE (مطالعه موردی: جنگل توشی- سیاهکل)}, abstract_fa = {جنگلهای شمال ایران در معرض افزایش آتش سوزیها در سالهای اخیر بوده است. سطح و شدت این آتش سوزیها به میزان زیادی وابسته به تیپ مواد سوختنی و تغییرپذیری مکانی آن در یک سیمای سرزمین است. توسعه روشهای دقیق برای ارزیابی مشخصات ماده سوختنی و پیشبینی احتمال وقوع آتش سوزیها در سیماهای سرزمین ناهمگن برای مدیریت و پیشگیری آتش سوزی بسیار مهم است. اهداف این مطالعه، تهیه نقشه تیپ ماده سوختنی در مقیاس محلی و شبیه سازی رفتار آتش آنها است. گستره مکانی تیپهای ماده سوختنی مختلف جنگل توشی در سیاهکل با توپوگرافی و پوشش گیاهی ناهمگن، با استفاده از پیمایش زمینی تعیین شد. با استفاده از قابلیتهای پایگاه داده مکانی GIS، شبیه ساز سطح آتش FARSITE برای مدل سازی گسترش و رفتار بالقوه آتش‌سوزی سطحی استفاده شد. چهار تیپ ماده سوختنی مختلف (علفزار، علف-‌ درختچه‌زار، جنگل طبیعی و جنگلکاری) در منطقه مورد مطالعه مورد بررسی قرار گرفت. تیپ‌های ماده سوختنی توسعه یافته با نمونه برداری زمینی و داده جمع آوری شده در شبیه‌سازFARSITE وارد شد. نتایج شبیه سازی نشان داد که تیپ ماده سوختنی برای درختچه زارها و جنگلهای طبیعی بلندترین طول شعله، زیادترین شدت خط آتش و بیشترین انتشار گرما در واحد سطح را ارائه کرد. تیپ ماده سوختنی برای علفزارها سریعترین نرخ گسترش سطحی و مدل ماده سوختنی برای جنگلکاری شدت آتش کمتر را ارائه کرد. این نقشه های رفتار آتش محصول نهایی است که میتواند به شکل کاملاً عملیاتی توسط مسئولان محلی مدیریت آتش بدون پردازش بیشتر برای برنامه‌ریزی و اقدام پیشگیرانه موثر آتش‌‌سوزی مورد استفاده قرار گیرد.}, keywords_fa = {تیپ ماده سوختنی,گسترش و رفتار آتش جنگل,شبیه‌ساز سطح آتش,شدت آتش,مدیریت آتش}, url = {https://jwfst.gau.ac.ir/article_2437.html}, eprint = {https://jwfst.gau.ac.ir/article_2437_6e64eed6a7764456ad12af9b8443bd06.pdf} }