@article { author = {Noraiy, Azam and جلالی, سید غلامعلی and اسماعیل زاده, امید}, title = {Seasonal Variation patterns of the Soil Seed Bank of Populus Caspica Protected Area, Noor forest park}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {1-20}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {The aim of this research is seed bank seasonal variation patterns in the Populus caspica reserved forest, Noor forest park. Above ground vegetation sampling were made by Braun-Blanquet method. Soil samples were collected during autumn, winter and spring and were studied using seedling emergence method. Seasonal variation in the soil seed bank during spring, autumn and winter indicated that maximum and minimum average size of soil seed bank were in autumn and spring by 747 and 426 seeding/m2 respectively. Numerical analysis of biodiversity showed that seed bank floristic data did not have differences during the third season, but its eveness in the spring was higer than autumn and winter seasons. Also the results indicate that only 5 tree species including; Ficus carica, Morus alba, Prunus divaricata, Alnus glutinosa and Populus caspica were able to produce persistent soil seed bank. In this case, seeds of P. caspica with average density of 83 seed/m2 were presented only in spring soil seed bank so we are cocluded that P. caspica to be included in transient soil seed bank. Totally, results of this study reiterd that the low seeds germination rate of P. caspica is not due to its low seed viability, but this failure is due to low persistence of its seeds. rather due to the low rate persistence Populus Caspica that has seeds lose their viability quickly, This is due to the failure to provide favorable conditions germination (light and high humidity) rapidly lose their viability.}, keywords = {Soil Seed Bank,Seasonal variation,Persistence,Populus caspica reserved forest,Noor forest park}, title_fa = {الگوی تغییرات فصلی بانک بذر خاک ذخیرگاه سفید پلت پارک جنگلی نور}, abstract_fa = {در این مطالعه الگوی تغییرات فصلی بانک بذر خاک ذخیرگاه سفید پلت پارک جنگلی نور بررسی گردید. نمونه برداری از پوشش گیاهی رو زمینی به روش براون بلانکه و مطالعه بانک بذر خاک در طی سه فصل پاییز، زمستان و بهار به روش کشت گلخانه ای انجام شد. نتایج نشان داد که بیشینه و کمینه متوسط اندازه بانک بذر خاک منطقه مربوط به فصول پاییز و بهار به ترتیب با تراکم بذر 747 و 426 بذر در متر مربع می‌باشد. تحلیل شاخص های عددی تنوع زیستی نشان داد که ترکیب گیاهی بانک بذر خاک منطقه در طی فصول مختلف سال از نظر شاخص های تنوع گونه ای با یکدیگر اختلاف نداشته اما مقادیر شاخص های یکنواختی آنها در فصل بهار در سطح بالاتری نسبت به دو فصل پاییز و زمستان قرار دارد. نتایج این تحقیق همچنین نشان داد تنها بذور 5 گونه درختی انجیر، توت، آلوچه، توسکا قشلاقی و سفیدپلت در بانک بذر خاک فصل بهار که نماینده بانک بذر خاک پایدار می باشد حضور می یابند. در این ارتباط بذور درختان سفیدپلت با متوسط تراکم 83 عدد بذر در متر مربع فقط در بانک بذر خاک فصل بهار حضور می یابد که این مسئله زودگذر بودن بانک بذر درختان سفیدپلت را دلالت می کند. به طور کلی نتایج تحقیق حاضر تصریح می‌کند علت اصلی عدم موفقیت تجدیدحیات بذری سفید پلت در منطقه به دلیل پایین بودن قوه نامیه بذور نبوده بلکه به دلیل پایین بودن درجه ماندگاری بذور این گونه می باشد.}, keywords_fa = {بانک بذر خاک,تغییرات فصلی,پایداری,جنگل حفاظت شده سفید پلت}, url = {https://jwfst.gau.ac.ir/article_1884.html}, eprint = {https://jwfst.gau.ac.ir/article_1884_f228334ad70e5fc720ccba1e2912aaa5.pdf} } @article { author = {golshani, pari and fallah, Asghar and kalbi, Siyavash}, title = {Estimation of Urban Forest Canopy Using Non-parametric Methods and GeoEye-1 Imagery Data (Comparison of BRT and RF Regression Algorithms)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {21-44}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {The forest canopy is the medium for energy, mass, and momentum exchanges between the forest ecosystem and the atmosphere. Tree crown size is a critical aspect of canopy structure that significantly influences these biophysical processes in the canopy. Tree crown size is also strongly related to other canopy structural parameters, such as tree height, diameter at breast height and biomass. But information about tree crown sizes is difficult to obtain and rarely available from traditional forest inventory. In this study, relationship between GeoEye-1 multispectral imagery data and urban forest canopy was investigated in region 3 of Tehran. Too, the aim of this study is evaluation the sufficiency of GeoEye-1 data and image texture features and Boosted Regression Tree method (BRT) and Random Forest algorithm (RF) to delineate the urban forest canopy. At first, we confided of geometric rectification using a road network map. By using full inventory take 100 plots with 20× 20 (m) dimension. In digital canopy extraction using texture analyze factors and main band data, BRT and RF algorithms was used for analyze and evaluation relationship between canopy area and satellite data. The BRT method estimated the canopy cover by adjustment determinate coefficient and root mean square error respectively 97%, 38.34(m2.plot-1). The mentioned values for RF are 93% and 38.24(m2.plot-1) respectively. This study presents that the strengths of the GeoEye-1 imagery data and the potentials of the image texture features and BRT and RF methods, which may help the urban planners, monitor and interpret complex urban characteristics}, keywords = {Canopy cover,Texture Analyze,GeoEye-1 Imagery Data,BRT,RF}, title_fa = {برآورد سطح تاج پوشش جنگل های شهری با استفاده از روش های نا پارامتری و داده های GeoEye-1 (مقایسه ی الگوریتم های BRT و RF)}, abstract_fa = {تاج پوشش جنگل واسطه‌ی تبادلات حرکتی، توده‌ای و انرژی بین اتمسفر و جنگل می‌باشد. اندازه‌ی تاج درخت معیاری از ساختار تاج پوشش است که به صورت معنی‌دار تحت تأثیر فرایندهای زیستی_فیزیکی در تاج پوشش است. اندازه‌ی تاج درخت به شدت در ارتباط با دیگر پارامترهای ساختاری مانند ارتفاع درخت، قطر بر ابر سینه و بیوماس می‌باشد. اما بدست آوردن اطلاعات در ارتباط با اندازه‌ی تاج درختان مشکل بوده و به ندرت از طریق روش‌های سنتی آمار برداری زمینی قابل دسترسی است. هدف از این مطالعه بررسی این مسئله است که «در برآورد سطح تاج پوشش جنگل‌های شهری می‌توان، از تصاویر ماهواره‌ای GeoEye-1 با قدرت تفکیک مکانی بالا استفاده کرد». از اهداف دیگر این مطالعه می‌توان به بررسی کارایی الگوریتم طبقه‌بندی و رگرسیونی درخت تقویت شونده (BRT) و همچنین الگوریتم رندم فارست (RF) به منظور مدل‌سازی تاج پوشش درختان اشاره کرد. به همین منظور پس از اطمینان از تصحیح هندسی تصویر مورد نظر و پیاده کردن قطعات نمونه روی تصویر و زمین، آمار برداری زمینی جهت محاسبه‌ی تاج پوشش انجام شد. در این مطالعه 100 قطعه به ابعاد 20×20 متر اندازه‌گیری و میانگین سطح تاج برای هر قطعه روی زمین بدست آمد. در مرحله‌ی بعد مشخصه‌های بافت مرتبه‌ی اول و دوم از باندهای اصلی تولید گردید. سپس داده‌های رقومی متناظر با سطح تاج از باندهای اصلی و مصنوعی مشخصه‌های بافت استخراج گردید. میزان R2adj و RMSe برای استخراج رقومی سطح تاج پوشش، به وسیله‌ی فاکتورهای آنالیز بافت و باندهای اصلی تصویر با استفاده از الگوریتم BRT، به ترتیب %97 و (m2/plot)34/38 بدست آمد. مقادیر ذکر شده برای روش RF به ترتیب %93 و (m2/plot)24/38 محاسبه شد. به طور کلی نتایج این مطالعه نشان داد که تصویر GeoEye-1، الگوریتم BRT و RF با به‌کارگیری مشخصه‌های بافت تصویر دارای قابلیت بالایی در محاسبه‌ی سطح تاج پوشش جنگل‌های شهری می‌باشند}, keywords_fa = {تاج پوشش,آنالیز بافت,تصویر ماهواره‌ای GeoEye-1,BRT,RF}, url = {https://jwfst.gau.ac.ir/article_1885.html}, eprint = {https://jwfst.gau.ac.ir/article_1885_453948758a7a313f20b328fd91be6f11.pdf} } @article { author = {shahini, yaser and ثاقب طالبی, خسرو and حیدری, حشمت الله and پرهیزکار, پژمان and آزادفر, داود}, title = {Impact of light and position in gap on quantitative and qualitative characteristics of oak (Quercus castaneifolia C.A.M) seedlings in Loveh, Gorgan.}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {45-64}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Chestnut leaved oak (Quercus castaneifolia C.A.M) is one of the most commercial tree species in the Hyrcanian forests of Iran and Caucasus. Having a good knowledge of tree species habitat is essential for silvicultural intervention and treatments of different forest stands. Light has been accepted as one the important ecological factors which can be altered within silvicultural intervention that could affect the tree and wood quality. This paper aimed to study the impact of light on oak seedlings within different gap sizes and position within the gap. For this purpose, 10 gaps were selected in the Loveh oak stands, near Gorgan in eastern Hyrcanian region. Nine microplots, each 4 m2, were laid out from the gap center to the gap edge and under the mariginal tree in four directions. Hemispherical photos were taken over each microplot and the data were analysed with GLA. Quantitative (collar diameter, height, shoot length and crown width) and qualitative (mode of branching, stem form, crown shape, vitality and health) characteristics of seedligs were measured or assassed and were then analysed by SPSS and EXCEL softwares. Results showed that mean realtive light intensity varied between 9.1% under the mariginal trees and 31.7% in the gap center. The maximum of mean annual height increment of seedlings (8.7±1.2 cm) was measured in the medium gap size (200 to 500 m2). The prportion of oak seedlings at the medium gap sizes was higher than in small (< 200 m2) and large (>500 m2) gaps. The average relative light intensity at the medium gap size was computed about 20.1±7.1 %. Resultes indicate that despite categorizing chestnut leaved oak as a light demanding tree, it's seedlings need shadow in the early stages. Therefore medium gap size could be introduced to achieve better quantitative and qualitative results.}, keywords = {Chestnut-leaved oak,gap,relative light intensity,Quantitative and qualitative characteristics}, title_fa = {تاثیر شدت نور نسبی و نقاط مختلف روشنه بر ویژگی های کمی و کیفی تجدیدحیات طبیعی بلندمازو در جنگل لوه – استان گلستان}, abstract_fa = {بلندمازو (Quercus cstaneifolia) از مهمترین گونه‌های صنعتی شمال ایران و قفقاز به‌شمار می‌آید پرورش توده‌های جنگلی نیاز به شناخت دقیق از سرشت طبیعی گونه‌ها و نحوه‌ی غلبه آنها در اکوسیستم منطقه دارد. نور مهمترین عامل اکولوژیکی است که در عملیات پرورش جنگل تغییر داده می‌شود تا کمیت و کیفیت نهالها و درختان بهبود یابد. هدف از این تحقیق بررسی شدت‌های مختلف نور، جهت دستیابی به بهترین شرایط نوری است تا در کنار افزایش خصوصیات کمی نهال‌های بلندمازو، مشخصه‌های کیفی آنها هم بهبود یابد. بدین منظور 10 روشنه طبیعی با ابعاد مختلف در توده بلوط-ممرز درجنگل لوه استان گلستان انتخاب شد و در هر روشنه 9 میکروپلات 4 مترمربعی تعبیه شد. جهت اندازه‌گیری شدت نور نسبی در هر میکروپلات از دوربین مجهز به عدسی چشم ماهی استفاده شد و عکس‌ها توسط نرم افزار GLA تجزیه و تحلیل شدند. ویژگی های کمی (قطر یقه، ارتفاع، طول نوشاخه و عرض تاج) و ویژگی های کیفی (شاخه دوانی، فرم ساقه، تقارن تاج، شادابی و سلامتی) نهالها برداشت شد. نتایج نشان داد که متوسط شدت نور نسبی در میکروپلاتها از 1/9 درصد در زیر تاج پوشش تا 7/31 درصد در مرکز روشنه نوسان داشت. بیشترین مقدار متوسط رویش ارتفاعی سالانه نهالها (2/1± 7/8 سانتیمتر) در سطوح متوسط روشنه (200 تا 500 مترمربع) اندازه‌گیری شد. فراوانی نسبی نهالهای بلندمازو در سطوح متوسط نسبت به سطوح کوچک (کمتر از 200 مترمربع) و بزرگ (بیشتر از 500 مترمربع) بیشتر بود. متوسط شدت نور نسبی در روشنه با سطوح متوسط معادل 1/7 ± 0/20 درصد تعیین شد. نتایج نشان دادند که نهال‌های بلندمازو علیرغم معروف بودن به نورپسندی، در مراحل اولیه‌ی رشد تا حدودی نیاز به سایه دارند و نباید در مقابل تابش شدید آفتاب قرار بگیرند. در نتیجه، روشنه متوسط می تواند موجب بهبود ویژگی های کمی و کیفی نهال های بلندمازو شود.}, keywords_fa = {بلندمازو,شدت نور نسبی,روشنه,مشخصه‌های کمی و کیفی}, url = {https://jwfst.gau.ac.ir/article_1886.html}, eprint = {https://jwfst.gau.ac.ir/article_1886_2e29265ee37b157b37829140e7864515.pdf} } @article { author = {محمدی, جهانگیر and شتایی جویباری, شعبان and نمیرانیان, منوچهر}, title = {Comparison of quantitative and qualitative characteristics of forests structure in natural managed and unmanaged forest stands (Case study: Shast Kalate forests of Gorgan)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {65-83}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {The aim of this study is investigation on quantitative and qualitative characteristics of forest structure in some part of managed forest stands (district one, Compartment number 4 to 22) and comparison with some part of unmanaged forest stands (district two, Compartment number 2 to 7) of Shast Kalate forests in Gorgan. The sample plots were collected in a systematic random sampling design in natural and managed forest stands. In each plot, we record species and their diameters, height and grade quality for all trees with a diameter at breast height (D.B.H.) greater than or equal to 12.5 cm. The results of statistical test showed that differences in slenderness coefficient Hornbeam, stand volume and basal area between managed forest stands and natural forest stands in 95% probability are significant but the differences in slenderness coefficient beech and tree density between managed forest stands and natural stands forest in 95% probability are not significant. Also, two type Carpinus - Parrotia and Parrotia-Carpinus as the dominant types are in natural and managed stands and two species Parrotia persica and Carpinus betulus have a highest abundance in natural and managed stands. Also, the numbers of trees in the first grade quality in natural and managed forest stands are not very different that indicating a positive trend is in management of managed forests in study area. Generally, the results of this study showed that the some of quantitative and qualitative characteristics of forests structure have changes but difference the most of quantitative and qualitative characteristics of forests structure between two stands are not statistically significant that indicating preservation of managed structure in study area and follow these forests from natural process and evolution.}, keywords = {unmanaged forest stands,managed forest stands,quantitative and qualitative characteristics of forests structure,composition and Shast Kalate forests of Gorgan}, title_fa = {مقایسه مشخصه های کمی و کیفی ساختار توده‌های طبیعی مدیریت شده و نشده (مطالعه موردی جنگل شصت کلاته گرگان)}, abstract_fa = {آ هدف از این مطالعه بررسی وضعیت مشخصه های کمی و کیفی ساختار توده های مدیریت شده (بخشی از سری 1، پارسل شماره 4 تا 22) و مقایسه آن با توده های مدیریت نشده (بخشی از سری 2، پارسل شماره 2 تا 7) طرح جنگلداری شصت کلاته گرگان می باشد. نمونه برداری به روش منظم تصادفی در توده های مورد نظر در منطقه مورد مطالعه پیاده گردید. سپس در هر قطعه نمونه مشخصه های نوع گونه، قطر برابر سینه، ارتفاع و درجه کیفی تمام درختان با قطر برابر سینه بیشتر از 5/12 سانتیمتر اندازه گیری و ثبت شد. نتایج نشان داد که بین دو توده مدیریت نشده و مدیریت شده از نظر ضریب قدکشیدگی گونه ممرز، حجم سرپا و رویه زمینی بر حسب هکتار تفاوت معنی داری در سطح احتمال 95 درصد وجود دارد اما از نظر ضریب قد کشیدگی گونه راش و تعداد پایه درختان در هکتار تفاوت معنی داری در سطح احتمال 95 درصد بین دو توده وجود ندارد. همچنین در هر دو توده مدیریت نشده و مدیریت شده دو تیپ ممرز - انجیلی و انجیلی - ممرز به ترتیب به عنوان تیپ غالب و دو گونه انجیلی و ممرز به ترتیب بیشترین درصد حضور را دارند ولی میزان درختان با درجه کیفی 1 در دو توده مدیریت نشده و مدیریت شده تفاوت زیادی با هم ندارند. بطور کلی نتایج حاصل از این تحقیق نشان داد که مشخصه های کمی و کیفی ساختار توده در اثر سه دوره اجرای طرح جنگلداری در توده های مدیریت شده تغییر یافته است، اما در کل تفاوت اکثر مشخصه های کمی و کیفی ساختار توده از لحاظ آماری معنی دار نبوده که نشاندهنده حفظ ساختار توده مدیریت شده منطقه مورد مطالعه و پیروی این توده از روند و تکامل طبیعی خود می باشد.}, keywords_fa = {توده های مدیریت نشده,مدیریت شده,مشخصه های کمی و کیفی ساختار,ترکیب,جنگل شصت کلاته گرگان}, url = {https://jwfst.gau.ac.ir/article_1887.html}, eprint = {https://jwfst.gau.ac.ir/article_1887_082a366f1b489c1d3eccf8bfcc369199.pdf} } @article { author = {mohammadi Sarvaleh, frouzan and PirBavaghar, mahtab and shabanian, naghi}, title = {Correlation of physiographic, human and climate factors with spatial distribution of Quercus brantii - Pistacia atlantica type in Sarvabad, Kurdistan province}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {85-102}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {This research was carried out to study the relationship of physiographic, climatic and human factors with the spatial distribution of Quercus brantii – Pistacia atlantica type. Quercus brantii – Pistacia atlantica type map was prepared based on existing maps and edited by field surveying in 11336 hectares of Sarvabad forests. Physiographic attribute (elevation, slope, aspect and distance from streams) and human factor map (distance from residential) were derived from the topographic and landuse maps, respectively. Climate factors maps (temperature and rain) were produced based on the records of 5 years meteorological bureau. Logistic Regression was used to select the most important effective factors in presence of Q. brantii – P. atlantica type and to model it. The results showed that the spatial distribution of Q. brantii – P. atlantica type is a function of altitude, aspect, slope, distance from streams and rainfall. Increasing of altitude, moving from wet slopes to dry slopes, reducing the distance from streams and reducing of rainfall are caused more presence of Q. brantii – P.atlantica type. According to regression analysis, some factors such as distance from residential and temperature are less effective than other studied factors on the presence of Q brantii – P. atlantica type. The results showed that 95% of Q. brantii – P. atlantica type are in the class above 50% of probability.}, keywords = {Keywords: distribution,Q. persica- P. atlantica,Modeling,GIS,west oak forests}, title_fa = {بررسی ارتباط عوامل فیزیوگرافی، انسانی و اقلیمی با پراکنش مکانی تیپ برودار – بنه در منطقه سروآباد استان کردستان}, abstract_fa = {این تحقیق با هدف بررسی ارتباط بین عوامل فیزیوگرافی، اقلیمی وانسانی در پراکنش مکانی تیپ برودار- بنه و پیش بینی احتمال حضور تیپ مورد نظر انجام گرفت. به همین منظور نقشه تیپ برودار- بنه در شهرستان سروآباد با مساحت 11336 هکتار بر اساس نقشه‌های موجود تهیه شد و با بازدیدهای میدانی منطقه مورد کنترل قرار گرفت. نقشه عوامل فیزیوگرافی (ارتفاع، جهت شیب، شیب و فاصله از آبراهه) و عوامل انسانی (مناطق مسکونی) از نقشه‌های توپوگرافی ونقشه کاربری اراضی استخراج شد. به همین ترتیب نقشه عوامل اقلیمی (دما، بارندگی)از آمارهای 5 ساله اداره هواشناسی استان کردستان بدست آمد. از روش رگرسیون لجستیک جهت انتخاب مهم‌ترین عوامل تاثیر‌گذار در ارتباط با پراکنش مکانی تیپ برودار – بنه و مدل‌سازی احتمال پراکنش مکانی تیپ استفاده شد. بر اساس نتایج به دست آمده احتمال حضور تیپ برودار – بنه در منطقه تابعی از ارتفاع از سطح دریا، جهت جغرافیایی، شیب، فاصله از آبراهه و بارندگی است. با افزایش ارتفاع، حرکت از شیب‌های مرطوب به سمت شیب‌های خشک، کاهش فاصله از آبراهه و کاهش بارندگی حضور تیپ برودار- بنه بیشتر شده است. مطابق با آنالیز رگرسیونی متغیرهای فاصله از مناطق مسکونی و دما در حضور تیپ برودار – بنه نقش کمتری از بقیه عوامل دارند. نتایج نشان داد که 95% تیپ برودار- بنه در نقشه احتمال در طبقه احتمال بالای 50% قرار دارد.}, keywords_fa = {کلمات کلیدی: پراکنش,تیپ برودار – بنه,مدل‌سازی,GIS,جنگل‌های بلوط غرب}, url = {https://jwfst.gau.ac.ir/article_1888.html}, eprint = {https://jwfst.gau.ac.ir/article_1888_4bdebc53543174cb9261ff7ee7c534e4.pdf} } @article { author = {Chavooshi, Arash and Madhoushi, Mehrab and محرابی, احسان and shakeri, Alireza}, title = {Using of short glass fiber in the MDF dust-PP composite, and investigation of its effect on mechanical properties of composite}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {103-120}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this research, effects of using short glass fiber on mechanical properties of MDF dust-PP composite were investigated. Short glass fibers with 3 mm in length were prepared. Sanding dust of MDF as lignocellulose material and polypropylene as the thermoplastic material were used.. MAPP as coupling agent to the rate of 4% by weight was used. 36 boards (12 treatments in 3 replicates) with nominal density of 1 gr/cm3 and dimensions of 30 × 20 × 1 cm3 using hot pressing method were produced. Afterward, samples were kept in room temperature conditions for 2 weeks. Then, mechanical properties were measured according to BS Standard (CEN/TS15534–1:2007). Results showed that the withdrawal strengths of nails and screws, flexural strength (MOE), modulus strength (MOR) were decreased as MDF dust volume increased. Also, with increasing short glass fibers content, resistances were decreased. Maximum mechanical resistances were obtained in the control treatments (0% short glass fiber).}, keywords = {Short glass fiber,MDF dust,withdrawal strengths of nail and screw,MOE,MOR}, title_fa = {استفاده از الیاف کوتاه شیشه در چندسازه نرمه MDF- پلی ‎پروپیلن و بررسی تاثیر آن بر خواص مکانیکی چندسازه}, abstract_fa = {در این پژوهش اثر استفاده از الیاف کوتاه شیشه بر خواص مکانیکی چندسازه نرمه MDF-پلی‌پروپیلن مورد بررسی قرار گرفت. الیاف کوتاه شیشه به طول 3 میلیمتر تهیه شدند. رمه سنباده زنیMDF به عنوان ماده لیگنوسلولزی و پلی پروپیلن به عنوان ماده زمینه استفاده شد. مالئیک اندرید پیوند داده شده با پلی‌پروپیلن (MAPP) نیز به عنوان عامل جفت‌کننده به میزان 4 درصد وزنی مورد استفاده قرار گرفت. سپس 36 تخته (12 تیمار در 3 تکرار) با دانسیته اسمی gr/cm31 در ابعاد 1×20×30 سانتی مترمکعب با استفاده از روش پرس گرم تهیه گردید. در ادامه تخته‌های ساخته شده برای تعادل رطوبتی به مدت 2 هفته در محیط آزمایشگاه (شرایط کلیما) قرار گرفتند. سپس به منظور بررسی خواص مکانیکی نمونه‌های آزمونی از استاندارد (CEN/TS15534–1:2007) استفاده شد. نتایج نشان داد که با افزایش درصد وزنی نرمه سمباده‌زنی MDF، قدرت نگهداری پیچ و میخ، مدول الاستیسیته خمشی (MOE) و مقاومت خمشی (MOR) نمونه‌های آزمونی کاهش و همچنین با افزایش مقدار الیاف کوتاه شیشه نیز این مقاومت ها کاهش پیدا کردند. بیشترین مقاومت‌های مکانیکی در تیمارهای شاهد (0% الیاف کوتاه شیشه) حاصل گردید.}, keywords_fa = {الیاف کوتاه شیشه,نرمه سمباده زنی MDF,قدرت نگهداری پیچ و میخ,مدول الاستیسیته خمشی,مقاومت خمشی}, url = {https://jwfst.gau.ac.ir/article_1889.html}, eprint = {https://jwfst.gau.ac.ir/article_1889_f7e06ce2d371a2d977111fa57b7df65f.pdf} } @article { author = {akhavan hejazi, faeze sadat and حسینی, سید ضیاء الدین and طلائی پور, محمد and بازیار, بهزاد}, title = {Study of Above Ground Biomass of Eucalyptus camadulensis in Garbayegan Fasa, the Province of Fars, Iran.}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {121-136}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {This study aimed to investigate the amount of above ground biomass of Eucalyptus camadulensis in Garbayegan Fasa ,the province of Fars in Iran. For this purpose three normal and healthy eucalypt trees with the diameter between 20 to 40 cm randomly were cut from Kowsar research station of even age plantation of 16 years old and spacing 3 by 3 m. that is located in Garbayegan Fasa. All branches and leaves were removed from all boles and,then three discs were separated from 1%, 50% and 75% of total tree height of each trunk.The remained trunks were logged in 1m.then marked and weighted for biomass determination. Trunk average moisture content was calculated using wood specimens that were taken from each disc of all trees. Leaves, barks and branches weighted both in wet and dry situation. By regard to the results the average critical and oven dry wood density in Garbayegan Fasa was 0.565 g/cm3, and trunk biomass 136.7 ton/ha, meanwhile the weight of leaves and bark were obtained 72.5 and 39.9 ton/ha respectively. All in all, biomass in total was reached 249.1 ton/ha.}, keywords = {Eucalyptus camaldulensis,Biomass,Branch,Leave,Density}, title_fa = {بررسی بیومس روی سطح زمین چوب اکالیپتوس کاملدولنسیس (Eucalyptus camaldulensis) در گربایگان فسا، استان فارس، ایران}, abstract_fa = {چکیدهدراین تحقیق،مقدار بیومس روی سطح زمین چوب اکالیپتوس کاملدولنسیس (Eucalyptus camaldulensis) مورد بررسی قرار گرفت.برای این منظور،تعداد سه اصله درخت سالم اکالیپتوس کاملدولنسیس 16ساله با قطر تقریبی بین 20 تا 40 سانتیمتر و با فاصله کاشت 3×3 متر که در ایستگاه تحقیقاتی آبخوانداری کوثر در منطقه گربایگان فسا(استان فارس)کاشته شده بودند به صورت تصادفی انتخاب،قطع واستفاده گردید.پس از کف بر کردن نمونه ها،جهت اندازه گیری دانسیته و رطوبت از هر درخت سه دیسک از ارتفاع 1، 50 و75 درصد درختان قطع و مابقی تنه به گرده بینه های 1متری جهت سهولت در کار اندازه گیری تبدیل گردید.جهت اندازه گیری میزان بیومس،برگ ها و شاخه ها نیز جمع آوری شدند.تنه،پوست،شاخه و برگ ها در حالت مرطوب بطور جداگانه توزین گردید و برای تعیین وزن خشک آنها به آزمایشگاه منتقل گردیدند.براساس نتایج بدست آمده متوسط کل بیومس خشک در روی سطح زمین درختان اکالیپتوس کاملدولنسیس دراین منطقه در طول دوره رشد(16سال) معادل249.07 تن درهکتار بوده که از این مقدار،چوب تنه136.66 تن درهکتار،سر شاخه بابرگ72.46 تن درهکتاروپوست تنه 39.94 تن در هکتار بدست آمد.میانگین دانسیته بحرانی و خشک نیز برای این گونه در منطقه فسا به ترتیب معادل 0.565و0.675 گرم بر سانتی متر مکعب محاسبه شد.}, keywords_fa = {اکالیپتوس کاملدولنسیس,بیومس,سرشاخه,برگ,دانسیته}, url = {https://jwfst.gau.ac.ir/article_1890.html}, eprint = {https://jwfst.gau.ac.ir/article_1890_5efc57a35661184a597d0fe3974b45ef.pdf} } @article { author = {Rafighi, Ali and Bayatkashkoli, Ali and Vali, Mohammad and Azizi, Majid}, title = {Determination and Evaluation of Effective Indexes in Optimum Site Selection of Flotting Paper Factory from Agriculture Residuals of Golestan Province (IRAN)}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {137-148}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Abstract:Flotting paper is applied for carton as intermediate product. The amount of carton consumption is a function of many different goods production. since the goods is needed to packaging, the amount of carton consuming is increasing generally. the huge potential of consumption of this product and the lack of applied studies increase the importance of determination of effective criteria for selection of optimum location for the factory. So, 31 indexes has been determined through of library references, interview with experts and industry owners. The importance level of these criteria and sub-branches are determined with AHP and Group Decision Making. Its concluded that supply of raw materials and products and economical criteria have the highest weight value. So the branch criteria such as cost of residuals supply, sources and the supply amount of residuals have the highest preferences for selection of suitable site for flotting paper factory of agriculture residuals with weight value as 0.094, 0.085, 0.069, 0.066.}, keywords = {Site Selection,Effective Criteria,AHP,Flotting paper,Golestan Province}, title_fa = {تعیین و ارزیابی معیارهای موثر در مکان یابی بهینه کارخانه تولید کاغذ فلوتینگ از پسماندهای کشاورزی در استان گلستان}, abstract_fa = {چکیدهکاغذ فلوتینگ به عنوان کالای واسطه‌ برای تولید کارتن به کار می‌رود. میزان مصرف کارتن تابعی از میزان تولید کالا‌های مختلف می باشد. با توجه به نیاز این کالا‌ها به بسته‌بندی، روند مصرف کارتن به طور کلی در حال افزایش است و به تبع آن نیاز به کاغذ فلوتینگ برای تولید کارتن نیز افزایش می یابد. وجود پتانسیل عظیم مصرف این فرآورده و خلاء تحقیقات کاربردی دراین زمینه ، لزوم بررسی معیارهای موثر در تصمیم‌گیری برای انتخاب محل استقرار بهینه واحدهای تولید این محصول را می طلبد. برای این منظور، با مطالعات کتابخانه‌ای، مصاحبه با کارشناسان و همچنین صاحبان صنعت، 31 شاخص شناسایی گردید. درجه اهمیت این معیار‌ها و زیر معیار‌ها با استفاده از فرآیند تحلیل سلسله‌مراتبی(AHP) و تصمیم‌گیری گروهی(GDM) تعیین شد. نتایج نشان داد که به ترتیب معیار تامین مواد و محصول و معیار اقتصادی دارای بالاترین ارزش وزنی می باشد. همچنین از بین 31 زیر معیار موثر در انتخاب محل استقرار کارخانه تولید کاغذ فلوتینگ از پسماند‌های کشاورزی، به ترتیب زیرمعیار‌های: هزینه تأمین پسماند‌ها، اطمینان از عرضه پسماند‌ها، دسترسی به منابع آب و میزان عرضه پسماند‌ها با ارزش وزنی 094/0، 085/0، 069/0، 066/0 در بالاترین اولویت قرار دارند.}, keywords_fa = {مکان یابی,معیار موثر,فرآیند تحلیل سلسله مراتبی,کاغذفلوتینگ,استان گلستان}, url = {https://jwfst.gau.ac.ir/article_1891.html}, eprint = {https://jwfst.gau.ac.ir/article_1891_578b10b4ca56535a30fe7a7cacbdbee9.pdf} } @article { author = {عدالت, حمیدرضا and فائزی پور, مهدی and دوست حسینی, کاظم and طبرسا, تقی and میرشکرایی, سید احمد}, title = {Evaluation of Penetration Effect of Phenol Formaldehyde Resin on Internal Bonding and Tensile Strength Parallel to Surface of Oriented Strand Board}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {149-164}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this study, the effect of PF resin penetration on physical and mechanical properties of OSB was evaluated. In order to make difference in resin penetration, strands were used in three different levels of 2%, 6% and 10% for MC. Mats were formed by using a special method and the boards were made with 12mm nominal thickness and 650 Kg.m3 density. Observation of bondlines was done with application of a fluorescent microscopy. Microscopic images were taken by using of a C14 Jenoptic camera equipped with a Sony progressive CCD sensor. Two parameters were defined to measure resin penetration; filled fibers number (FFN) and filled vessels number (FVN). The results showed that increase in MC has significant effect only on FFN parameter. The similar trend was found for IB but tensile strength parallel to surface and its modulus reach to their maximum amounts at 6% MC and they decreased significantly at 10% MC. The dependence of IB and tensile strength to resin penetration and thickness of adhesive was different. Thickness swelling of boards was improved with increase in MC.}, keywords = {resin penetration,Phenol formaldehyde,strand board,tensile parallel to surface,fluorescent microscopy}, title_fa = {ارزیابی اثر میزان نفوذ چسب فنل فرم آلدهید بر مقاومت چسبندگی داخلی و کشش موازی سطح در تخته تراشه جهت دار}, abstract_fa = {در این مطالعه به بررسی اثر میزان نفوذ چسب فنل فرم آلدهید بر ویژگی‌های فیزیکی و مکانیکی تخته تراشه جهت دار پرداخته شد. به منظور ایجاد تغییر در میزان نفوذ از تراشه‌های صنوبر با رطوبت‌های مختلف در سه سطح 2%، 6% و 10% استفاده گردید. تشکیل کیک با روشی خاص انجام گرفت و تخته‌ها به ضخامت 12 میلیمتر و دانسیته 650 کیلوگرم بر متر مکعب ساخته شدند. بررسی خطوط چسب با استفاده از میکروسکوپ فلوئورسنت انجام شد و تصاویر میکروسکوپی توسط یک دوربین C14 Jenoptic مجهز به یک سنسور CCD پردازشگر سونی با بزرگنمایی 240 برابر گرفته شد. برای اندازه-گیری میزان نفوذ از دو پارامتر تعداد فیبر پر شده (FFN) و تعداد آوند پر شده (FVN) استفاده گردید. نتایج نشان داد که با افزایش رطوبت تراشه مقدار پارامتر FNN به طور معنی‌داری افزایش می‌یابد و تغییر رطوبت اثری بر پارامتر FVN ندارد. در خصوص مقاومت چسبندگی داخلی نیز افزایش رطوبت موجب بهبود معنی‌دار این ویژگی گردید. مقاومت و مدول کششی موازی سطح با افزایش رطوبت تا 6% به حداکثر مقدار خود رسید و در رطوبت 10%، بطور معنی‌داری کاهش پیدا کرد. وابستگی مقاومت‌های چسبندگی داخلی و کشش موازی سطح به میزان نفوذ و ضخامت خط چسب، با یکدیگر متفاوت بود. نتایج حاصل از واکشیدگی ضخامت تخته‌ها نشان داد که با افزایش میزان نفوذ چسب، این ویژگی بهبود می-یابد.}, keywords_fa = {نفوذ چسب,فنل فرم آلدهید,تخته تراشه,کشش موازی سطح,میکروسکوپ فلوئورسنت}, url = {https://jwfst.gau.ac.ir/article_1892.html}, eprint = {https://jwfst.gau.ac.ir/article_1892_718c3a1bf1ff37fc359039385792a37f.pdf} } @article { author = {azizi, soghra and Tabari, masoud and sadati, seyed ehsan and ghanbary, ehsan}, title = {Physiological responses of Populus euphratica seedlings under flooding stress with saline and fresh waters}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {165-178}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {Populus euphratica is one of species growing naturally in arid and semi-arid regions in riparian habitats. The purpose of this study was to investigate the physiological responses including photosynthesis, stomatal conductivity, transpiration, water potential, and relative water content of leaf of one-year Populus euphratica potted seedlings under flooding-salinity combined stress. Saline-flooding treatments in 5 levels including control (without saline-flooding) flooding (irrigation 4 cm above soil surface) with salinity in concentrations 0, 50, 100, and 150 mM NaCl were applied. This experiment was conducted as completely randomized design in a period of 60 days in greenhouse environment. Results showed that survival in all treatments was about 100%. Saline-flooding treatment had a significant effect on photosynthesis, stomatal conductivity, transpiration, water potential, and relative content of leaf water, so that the increase of salinity in flooding conditions led to decreased in all characteristics measured compared to control treatment. Generally, the results of this research revealed that in spite of reduced physiological measures with increased salinity, P. caspica seedlings are able to maintain the survival under mentioned stresses. With continuing of the research in next growing seasons by the researchers, responses physiological characteristics and particularly survival and growth of these seedlings to above mentioned stresses will be further revealed.}, keywords = {Salinity stress,Flooding,Photosynthesis,stomatal conductivity,water potential}, title_fa = {پاسخ های فیزیولوژیک نهال های پده (Populus euphratica) تحت تاثیر تنش غرقابی با آب‌های شیرین و شور}, abstract_fa = {پده (Populus euphratica) از جمله گونه‌های درختی است که در مناطق خشک و نیمه خشک در حاشیه رودخانه‌ها به صورت طبیعی رویش دارد. هدف این تحقیق بررسی پاسخ‌های فیزیولوژیکی شامل فتوسنتز، هدایت روزنه‌ای، تعرق، پتانسیل آبی و محتوی نسبی آب برگ در نهال‌های یکساله پده تحت تنش ترکیبی غرقابی- شوری بود. تیمار تنش غرقابی- شوری در 5 سطح شامل شاهد (بدون شوری- غرقاب)، غرقابی (4 سانتی‌متر بالای سطح خاک) با غلظت شوری 0، 50، 100 و 150 میلی‌مولار NaCl اعمال گردید. آزمایش در قالب طرح کاملاً تصادفی به مدت 60 روز در محیط گلخانه صورت گرفت. نتایج نشان داد میزان زنده مانی در کلیه سطوح تیمار برابر با 100 درصد بود. ترکیب شوری- غرقابی اثر معنی‌داری روی فتوسنتز، هدایت روزنه‌ای، تعرق، پتانسیل آبی و محتوی نسبی آب برگ داشت، طوری که افزایش شوری در شرایط غرقابی باعث کاهش تمام این صفات نسبت به شاهد شد. به طور کلی، نتایج این تحقیق آشکار ساخت که علی‌رغم کاهش اندازه‌های فیزیولوژیک با افزایش شوری، نهال‌های پده توانایی حفظ زنده‌مانی را تحت شرایط تنش‌های ذکر شده داشته است. با ادامه تحقیق در دوره‌های رویشی بعدی توسط محققین، پاسخ زنده‌مانی، رشد و صفات فیزیولوژیک نهال پده به تنش‌های فوق آشکارتر خواهد شد.}, keywords_fa = {تنش شوری,غرقابی,فتوسنتز,هدایت روزنه ای,پتانسیل آبی}, url = {https://jwfst.gau.ac.ir/article_1893.html}, eprint = {https://jwfst.gau.ac.ir/article_1893_07a3f2e8c12b4a6441d5b5eed4987669.pdf} } @article { author = {djafari petroudy, seyed rahman and gh, a and r, h}, title = {Production of nanopaper from cellulose nanofiber prepared from chemical soda bagasse pulp: Effect of processing variables; Pre-treatment and homogenization passing}, journal = {Journal of Wood and Forest Science and Technology}, volume = {21}, number = {1}, pages = {179-192}, year = {2014}, publisher = {Gorgan University Of Agricultural Sciences and Natural Resources}, issn = {2322-2077}, eissn = {2322-2786}, doi = {}, abstract = {In this research, study on the capabilities of DED bleached soda bagasse pulp as a raw material for production of cellulose nanofiber was explored. For this purpose, different types of cellulose nanofiber were prepared. Cellulose nanofiber was produced either mechanically by homogenization or with enzymatic pre-treatment (pre-treatment with Endoglucanase) followed by homogenization. The effect of different passing through homogenization (three and five times)for either un-pretreated or enzyme pre-treated pulps on the nanofiber and nanopaper properties was studied as processing variables. The results showed that viscosities and DP of cellulose nanofiber decreased with increasing the homogenization passing. Dispersion Casting (DC) was selected as a nanopaper production approach. Tensile index of nanopaper increased with increasing homogenization passing from three to five times and nanopaper prepared from enzyme pre-treated pulps and five passing homogenization had higher tensile and lower tear indices. This was most certainly due to asignificant increment cellulose nanofiber fibrillation through homogenization processes.}, keywords = {Chemical soda bagasse pulp,Cellulose nanofiber,Dispersion Casting (DC)}, title_fa = {تولید نانوکاغذ از نانوفیبرسلولز تهیه شده از خمیر شیمیایی سودای باگاس: تاثیر متغیر های فرآیندی: پیش تیمار و تعداد مراحل عبور}, abstract_fa = {هدف اصلی این تحقیق، بررسی قابلیت های خمیر شیمیایی سودای باگاس به عنوان ماده اولیه برای تولید نانوفیبرسلولز است. برای نیل به این مقصود، انواع مختلف نانوفیبرسلولز باگاس به روش همگن‌سازی تولید شد. نانو الیاف سلولز باگاس هم به صورت روش کاملاً مکانیکی و هم به روش آنزیمی (تیمار با آنزیم اندوگلوکاناز) تواماً با روش مکانیکی تهیه گردید. تاثیر تعداد مراحل عبور از همگن‌ساز (سه و پنج بار)، هم برای خمیرهای بدون تیمار و هم با تیمار آنزیمی، بر روی ویژگیهای نانوالیاف و نیز نانو کاغذ ساخته شده به عنوان متغیرهای فرآیندی مورد بررسی قرار گرفت. نتایج حاصل نشان داد که با افزایش تعداد مراحل عبور، گرانروی و درجه بسپارش نانو الیاف سلولز باگاس کاهش می یابد. برای تهیه نانو کاغذ از روش پراکنده سازی به طریق قالب گیری استفاده شد. مقاومت کششی نانوکاغذ با افزایش تعداد مراحل عبور از سه مرحله به پنج مرحله افزایش قابل توجهی داشت و نانوکاغذ تهیه شده از خمیر تیمار شده با آنزیم و پنج مرحله عبور از همگن ساز دارای بیشترین شاخص مقاومت کششی بود و کمترین شاخص مقاومت به پاره شدن نیز در نانوکاغذ تهیه شده از خمیر بدون تیمار و با سه مرحله عبور از همگن ساز به دست آمد که دلیل این موضوع به میزان فیبریله شدن بیشتر الیاف خمیر در هنگام عبور از همگن‌ساز مرتبط است.}, keywords_fa = {خمیر شیمیایی سودای باگاس,نانوفیبرسلولز,پراکنده سازی به طریق قالب گیری}, url = {https://jwfst.gau.ac.ir/article_1883.html}, eprint = {https://jwfst.gau.ac.ir/article_1883_db0a40e31136ab861a5e0ba7d5c433e3.pdf} }